Minor audio_test example fix.

Fix CFG_TUD_AUDIO_EP_SZ_IN size.

Author: HiFiPhile

examples/device/audio_test/src/main.c

@@ -71,7 +71,7 @@ audio_control_range_2_n_t(1) volumeRng[CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX+1];
 audio_control_range_4_n_t(1) sampleFreqRng; 						// Sample frequency range state
 
 // Audio test data
-uint16_t test_buffer_audio[CFG_TUD_AUDIO_EP_SZ_IN/2];
+uint16_t test_buffer_audio[(CFG_TUD_AUDIO_EP_SZ_IN - 2) / 2];
 uint16_t startVal = 0;
 
 void led_blinking_task(void);
@@ -400,7 +400,7 @@ bool tud_audio_tx_done_pre_load_cb(uint8_t rhport, uint8_t itf, uint8_t ep_in, u
   (void) ep_in;
   (void) cur_alt_setting;
 
-  tud_audio_write ((uint8_t *)test_buffer_audio, CFG_TUD_AUDIO_EP_SZ_IN);
+  tud_audio_write ((uint8_t *)test_buffer_audio, CFG_TUD_AUDIO_EP_SZ_IN - 2);
 
   return true;
 }
@@ -413,7 +413,7 @@ bool tud_audio_tx_done_post_load_cb(uint8_t rhport, uint16_t n_bytes_copied, uin
   (void) ep_in;
   (void) cur_alt_setting;
 
-  for (size_t cnt = 0; cnt < CFG_TUD_AUDIO_EP_SZ_IN/2; cnt++)
+  for (size_t cnt = 0; cnt < (CFG_TUD_AUDIO_EP_SZ_IN - 2) / 2; cnt++)
   {
     test_buffer_audio[cnt] = startVal++;
   }

examples/device/audio_test/src/plot_audio_samples.py

@@ -2,6 +2,7 @@
 import matplotlib.pyplot as plt
 import numpy as np
 import platform
+import csv
 
 if __name__ == '__main__':
 
@@ -31,4 +32,7 @@
     plt.ylabel('Amplitude')
     plt.title('MicNode')
     plt.show()
+    
+    samples = np.array(myrecording)
+    np.savetxt('Output.csv', samples, delimiter=",", fmt='%s')
 

examples/device/audio_test/src/tusb_config.h

@@ -114,7 +114,7 @@ extern "C" {
 #define CFG_TUD_AUDIO_ENABLE_EP_IN                                    1
 #define CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX                    2                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below
 #define CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX                            1                                       // Driver gets this info from the descriptors - we define it here to use it to setup the descriptors and to do calculations with it below - be aware: for different number of channels you need another descriptor!
-#define CFG_TUD_AUDIO_EP_SZ_IN                                        48 * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x 1 Channel
+#define CFG_TUD_AUDIO_EP_SZ_IN                                        (48 + 1) * CFG_TUD_AUDIO_FUNC_1_N_BYTES_PER_SAMPLE_TX * CFG_TUD_AUDIO_FUNC_1_N_CHANNELS_TX      // 48 Samples (48 kHz) x 2 Bytes/Sample x CFG_TUD_AUDIO_N_CHANNELS_TX Channels - One extra sample is needed for asynchronous transfer adjustment, see feedback EP
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SZ_MAX                             CFG_TUD_AUDIO_EP_SZ_IN                  // Maximum EP IN size for all AS alternate settings used
 #define CFG_TUD_AUDIO_FUNC_1_EP_IN_SW_BUF_SZ                          CFG_TUD_AUDIO_EP_SZ_IN + 1