Why I can't run this(at least with webui)?

[Dedsd]

Hi! I tried running in a pi but I couldn't get it to work. Checked the network with ip -r(192.169.0.0/24) and put the correct credentials of openvpn account. After a fill seconds checking (health: starting) the container stop working and restart(since I used --restart unless-stopped). When I try to run again I get The container name transmission-openvpn is already in use by container [container id]. But, when I try to exec in the container I get an output that the container is not running. Anyone know what I'm doing wrong to execute?

[pkishino]

Bro, if you want help you might want to provide some more details like config/docker setup /run command etc..
Check your docker containers, you can’t create two with the same name..

[Dedsd]

How can I see the logs? It is not running.

[pkishino]

docker logs “container name”
This will show the logs from the container in whatever state it is

[Dedsd]

Here we go:

Starting container with revision: 20877f1b168b6ff27fc58aeef40756572c562d47
Creating TUN device /dev/net/tun
Using OpenVPN provider: PIA
Running with VPN_CONFIG_SOURCE auto
Provider PIA has a bundled setup script. Defaulting to internal config
Executing setup script for PIA
Downloading OpenVPN config bundle openvpn into temporary file /tmp/tmp.Xl4MAiLGch
Extract OpenVPN config bundle into PIA directory /etc/openvpn/pia
Starting OpenVPN using config france.ovpn
Modifying /etc/openvpn/pia/france.ovpn for best behaviour in this container
Modification: Point auth-user-pass option to the username/password file
Modification: Change ca certificate path
Modification: Change ping options
Modification: Update/set resolv-retry to 15 seconds
Modification: Change tls-crypt keyfile path
Modification: Set output verbosity to 3
Modification: Remap SIGUSR1 signal to SIGTERM, avoid OpenVPN restart loop
Setting OpenVPN credentials...
adding route to local network 192.168.0.0/24 via 172.17.0.1 dev eth0
Mon Jan 24 00:55:10 2022 OpenVPN 2.4.7 arm-unknown-linux-gnueabihf [SSL (OpenSSL)] [LZO] [LZ4] [EPOLL] [PKCS11] [MH/PKTINFO] [AEAD] built on Jul 19 2021
Mon Jan 24 00:55:10 2022 library versions: OpenSSL 1.1.1f  31 Mar 2020, LZO 2.10
Mon Jan 24 00:55:10 2022 NOTE: the current --script-security setting may allow this configuration to call user-defined scripts
Mon Jan 24 00:55:10 2022 TCP/UDP: Preserving recently used remote address: [AF_INET]191.101.217.32:1198
Mon Jan 24 00:55:10 2022 Socket Buffers: R=[180224->180224] S=[180224->180224]
Mon Jan 24 00:55:10 2022 UDP link local: (not bound)
Mon Jan 24 00:55:10 2022 UDP link remote: [AF_INET]xxx-someip
Mon Jan 24 00:55:10 2022 TLS: Initial packet from [AF_INET]xxx-someip, sid=3727f218 660cab4a
Mon Jan 24 00:55:10 2022 WARNING: this configuration may cache passwords in memory -- use the auth-nocache option to prevent this
Mon Jan 24 00:55:11 2022 VERIFY OK: depth=1, C=US, ST=CA, L=LosAngeles, O=Private Internet Access, OU=Private Internet Access, CN=Private Internet Access, name=Private Internet Access, [email protected]
Mon Jan 24 00:55:11 2022 VERIFY KU OK
Mon Jan 24 00:55:11 2022 Validating certificate extended key usage
Mon Jan 24 00:55:11 2022 ++ Certificate has EKU (str) TLS Web Server Authentication, expects TLS Web Server Authentication
Mon Jan 24 00:55:11 2022 VERIFY EKU OK
Mon Jan 24 00:55:11 2022 VERIFY OK: depth=0, C=US, ST=CA, L=LosAngeles, O=Private Internet Access, OU=Private Internet Access, CN=paris410, name=paris410
Mon Jan 24 00:55:11 2022 Control Channel: TLSv1.3, cipher TLSv1.3 TLS_AES_256_GCM_SHA384, 2048 bit RSA
Mon Jan 24 00:55:11 2022 [paris410] Peer Connection Initiated with [AF_INET]xxx-someip
Mon Jan 24 00:55:12 2022 SENT CONTROL [paris410]: 'PUSH_REQUEST' (status=1)
Mon Jan 24 00:55:12 2022 AUTH: Received control message: AUTH_FAILED
Mon Jan 24 00:55:12 2022 SIGTERM[soft,auth-failure] received, process exiting

[pkishino]

See bottom.. Auth failed means your credentials are bad or possibly contain special characters.. check wiki

[Dedsd]

My user have to be of openVPN cloud right? And if I can logging in to then I can use in transmission-openvpn?

[Dedsd]

@pkishino Oh, sorry:
Plataform: Debian arm64
Docker run:

 docker run --cap-add=NET_ADMIN -d --name transmissionvpn -v /home/pi/transmissionvpn/:/data -e OPENVPN_PROVIDER=PIA -e OPENVPN_CONFIG=france -e OPENVPN_USERNAME=myuser -e OPENVPN_PASSWORD=mypasswd -e LOCAL_NETWORK=192.168.0.0/24 --log-driver json-file --log-opt max-size=10m -p 3237:3237 haugene/transmission-openvpn

Openvpn account: https://openvpn.net/

[pkishino]

Huh? You have specified PIA as provider.. you need an account with them. Openvpn cloud I don’t know what that is.. This container requires some VPN provider account

…

On Mon, Jan 24, 2022 at 21:01 Dedsd ***@***.***> wrote: My user have to be of openVPN cloud right? And if I can logging in to then I can use in transmission-openvpn? — Reply to this email directly, view it on GitHub <#2165 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA7OFYRHIGKMIFK43Q3PGU3UXU5SVANCNFSM5MSKMLAA> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you were mentioned.Message ID: <haugene/docker-transmission-openvpn/repo-discussions/2165/comments/2033386 @github.com>

[Dedsd]

Do you have some suggestion of account that you use?

[pkishino]

I can recommend PrivateVPN, but depends on your location etc etc.. PIA is often used as well.

…

On Mon, Jan 24, 2022 at 21:20 Dedsd ***@***.***> wrote: Do you have some suggestion of account that you use? — Reply to this email directly, view it on GitHub <#2165 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AA7OFYWY26AGS77BHEVK43TUXU7ZLANCNFSM5MSKMLAA> . Triage notifications on the go with GitHub Mobile for iOS <https://apps.apple.com/app/apple-store/id1477376905?ct=notification-email&mt=8&pt=524675> or Android <https://play.google.com/store/apps/details?id=com.github.android&referrer=utm_campaign%3Dnotification-email%26utm_medium%3Demail%26utm_source%3Dgithub>. You are receiving this because you were mentioned.Message ID: <haugene/docker-transmission-openvpn/repo-discussions/2165/comments/2033483 @github.com>

[Dedsd]

Can be of protonvpn?

[Dedsd]

Oh, I found https://github.com/haugene/vpn-configs-contrib . But still, my openvpn credentials are correct https://protonvpn.com/support/vpn-login/, without any client already connected to the vpn and no special characters..

[Dedsd]

Hi @pkishino I seemed to fix the problem. However i'm running in a pi and when I do wget http://localhost:9091/ it founds a website, since the os of the pi that i'm running doesn't have a gui I can't access transmission with http://[pi ip]:9091/ . Any idea/solution?

[Dedsd]

Reinstalled my os and it worked.