Dishwasher strange behavior

[011V32]

Hello.
Is this intended/normal with the status?

Thanks.

[Meatballs1]

My programFinished isn't in date format:

[011V32]

My statuses keep becoming unavailable for short periods, which causes everything to change.(see my picture above)
You don't seem to have this problem? What could be a problem here?
Thx

[Meatballs1]

Check the logs, I assume it's disconnecting maybe WiFi signal?

[011V32]

2025-04-25 20:29:16.352538 dishwasher Websocket error: ping/pong timed out
2025-04-25 20:29:19.354650 dishwasher websocket closed, reconnecting...
2025-04-25 20:30:19.354978 dishwasher connecting to BOSCH-Dishwasher.local
2025-04-25 20:30:19.551462 dishwasher ERROR [Errno -5] No address associated with hostname
2025-04-25 20:31:19.552141 dishwasher connecting to BOSCH-Dishwasher.local
2025-04-25 20:31:19.790075 CON: wss://BOSCH-Dishwasher.local:443/homeconnect
2025-04-25 20:31:19.955001 dishwasher RX: {'sID' ....

[011V32]

Could the timeout be increased or the number of connection attempts increased before the status is set to unavailable?

[Meatballs1]

It's on ~60s which is reasonable, and it accurately reflects the device is offline...

Have you tried assigning a DHCP lease and setting the IP in the devices.json if you are having DNS issues?

[dekiesel]

My Dryer is dropping off the network every five minutes for about a minute:

hcpy-app-1  | 2025-09-12 12:12:04.580502 Trockner {'BSH.Common.Event.SoftwareUpdateAvailable': 'Off'}
hcpy-app-1  | 2025-09-12 12:12:04.580554 Trockner publish to homeconnect/Trockner/event/bsh_common_event_softwareupdateavailable
hcpy-app-1  | 2025-09-12 12:12:07.487017 Trockner {'BSH.Common.Event.SoftwareUpdateAvailable': 'Off'}
hcpy-app-1  | 2025-09-12 12:12:07.487069 Trockner publish to homeconnect/Trockner/event/bsh_common_event_softwareupdateavailable
hcpy-app-1  | 2025-09-12 12:13:04.620976 Trockner {'BSH.Common.Event.SoftwareUpdateAvailable': 'Off'}
hcpy-app-1  | 2025-09-12 12:13:04.621029 Trockner publish to homeconnect/Trockner/event/bsh_common_event_softwareupdateavailable
hcpy-app-1  | 2025-09-12 12:14:03.274778 Trockner {'BSH.Common.Event.SoftwareUpdateAvailable': 'Off'}
hcpy-app-1  | 2025-09-12 12:14:03.274831 Trockner publish to homeconnect/Trockner/event/bsh_common_event_softwareupdateavailable
hcpy-app-1  | 2025-09-12 12:14:05.781957 Trockner {'BSH.Common.Event.SoftwareUpdateAvailable': 'Off'}
hcpy-app-1  | 2025-09-12 12:14:05.782006 Trockner publish to homeconnect/Trockner/event/bsh_common_event_softwareupdateavailable
hcpy-app-1  | 2025-09-12 12:15:04.216642 Trockner {'BSH.Common.Event.SoftwareUpdateAvailable': 'Off'}
hcpy-app-1  | 2025-09-12 12:15:04.216691 Trockner publish to homeconnect/Trockner/event/bsh_common_event_softwareupdateavailable
hcpy-app-1  | 2025-09-12 12:15:16.776894 Trockner Websocket error: Connection timed out
hcpy-app-1  | 2025-09-12 12:15:17.209250 Trockner websocket closed, reconnecting...
hcpy-app-1  | 2025-09-12 12:15:17.209305 Trockner not connected 10.1.104.121
hcpy-app-1  | 2025-09-12 12:16:17.209628 Trockner connecting to 10.1.104.121
hcpy-app-1  | 2025-09-12 12:16:17.995766 CON: wss://10.1.104.121:443/homeconnect
hcpy-app-1  | 2025-09-12 12:16:19.217453 Trockner {'error': 404, 'resource': '/ci/authentication'}
hcpy-app-1  | 2025-09-12 12:16:19.217531 Trockner updating {"BSH.Common.Setting.Language": "De", "BSH.Common.Set.......

This happens every fifth minute for about a minute.

[Meatballs1]

The 1 minute is likely the built in delay there is in the reconnection loop (this could probably be reduced),. If it's 5 minutes exactly between disconnects it sounds like either the device side has a max connection time? Does it stay connected longer if commands are sent (to refresh the connection)? Does the app do the same (although may have some keep alive).

[dekiesel]

I'll check if sending commands to the dryer has an influence on the timeout