Error reset (reboot)

[Peterpanik]

Hi

I’m looking into the documentation of HeishaMon (see ProtocolByteDecrypt.md
) and I came across a reference to an “Error reset (reboot) query”.
Could you clarify exactly what this “Error reset (reboot) query” is used for within the HeishaMon protocol?

[geduxas]

It's sequence to reset active error state of heatpump. Usually it will show error in screen. And pump will be in stop state. So this sequence reset error.

[Peterpanik]

Thanks

I have also observed “ghost/false” error messages appearing in the Panasonic Service Cloud.
Notably, these errors do not appear on the remote controller for some strange reason?

[geduxas]

Not all errors ends to perment stop, check error history you should find them there

[sermayoral]

Hi everyone, due to a mistake on my part, I just got an H62 error on my Panasonic Aquarea heat pump, and my machine is in a stop state. I am currently away on a trip and would like to reset the error so I can turn the unit back on.

I have a Wemos with Heishamon connected to the Panasonic machine. I’ve seen that there is a protocol to reset errors, but... is it possible to trigger it via the Heishamon interface, MQTT, or any other method?

Error reset (reboot)

f1 6c 01 10 00 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 91

Thank you very much!

[MrReSc]

http://ip-adress/command?SetReset=1