diff --git a/docs/api/supervisor/endpoints.md b/docs/api/supervisor/endpoints.md
index 19d93a20386..cba442012f6 100644
--- a/docs/api/supervisor/endpoints.md
+++ b/docs/api/supervisor/endpoints.md
@@ -1693,6 +1693,7 @@ Return information about the host.
| llmnr_hostname | string or null | The hostname currently exposed on the network via LLMNR for host |
| operating_system | string | The operating system on the host |
| startup_time | float | The time in seconds it took for last boot |
+| nvme_devices | list | A list of [NVMe devices](api/supervisor/models.md#nvme-device) available on host |
**Example response:**
@@ -1714,7 +1715,13 @@ Return information about the host.
"boot_timestamp": 1234567788,
"startup_time": 12.345,
"broadcast_llmnr": true,
- "broadcast_mdns": false
+ "broadcast_mdns": false,
+ "nvme_devices": [
+ {
+ "id": "00000000-0000-0000-0000-000000000000",
+ "path": "/dev/nvme0n1"
+ }
+ ]
}
```
@@ -1906,6 +1913,68 @@ Shutdown the host
+
+
+Returns the status and lifetime information of the specified NVMe device.
+See `nvme_devices` field in `/host/info` for a list of devices. This API supports
+providing either the `id` or `path` as the identifier for an NVMe device.
+
+**Returned data:**
+
+| key | type | description |
+| ------------------------------- | ---- | ----------------------------------------------------------------------------------------------- |
+| critical_warning | int | Critical warnings raised over device lifetime |
+| available_spare | int | Percentage of remaining spare capacity available |
+| data_units_read | int | Thousands of 512 byte data units read by host over device lifetime |
+| data_units_written | int | Thousands of 512 byte data units written by host over device lifetime |
+| percent_used | int | Estimate of percent of device's life used based on manufacturer's prediction |
+| temperature_kelvin | int | Current temperature in Kelvin calculated from sensors |
+| host_read_commands | int | Read commands completed over device lifetime |
+| host_write_commands | int | Write commands completed over device lifetime |
+| controller_busy_minutes | int | Minutes the device was busy with I/O commands over device lifetime |
+| power_cycles | int | Power cycles over device lifetime |
+| power_on_hours | int | Power-on hours over device lifetime |
+| unsafe_shutdowns | int | Unsafe shutdowns over device lifetime |
+| media_errors | int | Data integrity errors detected over device lifetime |
+| number_error_log_entries | int | Error entries in log over device lifetime |
+| warning_temp_minutes | int | Minutes temperature has been greater than the warning threshold over device lifetime |
+| critical_composite_temp_minutes | int | Minutes temperature has been greater than the critical composite threshold over device lifetime |
+
+**Example response:**
+
+```json
+{
+ "available_spare": 100,
+ "critical_warning": 0,
+ "data_units_read": 44707691,
+ "data_units_written": 54117388,
+ "percent_used": 1,
+ "temperature_kelvin": 312,
+ "host_read_commands": 428871098,
+ "host_write_commands": 900245782,
+ "controller_busy_minutes": 2678,
+ "power_cycles": 652,
+ "power_on_hours": 3192,
+ "unsafe_shutdowns": 107,
+ "media_errors": 0,
+ "number_error_log_entries": 1069,
+ "warning_temp_minutes": 0,
+ "critical_composite_temp_minutes": 0
+}
+```
+
+
+
+
+
+Returns the status and lifetime information of the datadisk if the datadisk is
+an NVMe device and Home Assistant Operating System is in use.
+
+**Returned data:**
+See `/host/nvme//status` above, response is identical.
+
+
+
### Ingress
@@ -2189,7 +2258,7 @@ Value in `name` must be unique and can only consist of letters, numbers and unde
-
+
Update an existing mount in Supervisor and remount it
**Payload:**
@@ -2213,12 +2282,12 @@ name, it cannot be changed. Delete and re-add the mount to change the name.
-
+
Unmount and delete an existing mount from Supervisor.
-
+
Unmount and remount an existing mount in Supervisor using the same configuration.
@@ -2439,7 +2508,7 @@ Return a list of available [Access Points](api/supervisor/models.md#access-point
-
+
Create a new VLAN *id* on this network interface.
@@ -2885,7 +2954,7 @@ Execute a healthcheck and autofix & notifcation.
-
+
Set options for this check.
@@ -2897,7 +2966,7 @@ Set options for this check.
-
+
Execute a specific check right now.
@@ -3478,13 +3547,20 @@ Update the supervisor
Some of the endpoints uses placeholders indicated with `<...>` in the endpoint URL.
-| placeholder | description |
-| ----------- | ----------------------------------------------------------------------------------------------------------------------------------------------------- |
-| addon | The slug for the addon, to get the slug you can call `/addons`, to call endpoints for the add-on calling the endpoints you can use `self`as the slug. |
+| placeholder | description |
+| ----------- | ------------------------------------------------------------------------------------------------------------------------------------------------------ |
+| addon | The slug for the addon, to get the slug you can call `/addons`, to call endpoints for the add-on calling the endpoints you can use `self` as the slug. |
| application | The name of an application, call `/audio/info` to get the correct name |
-| interface | A valid interface name, example `eth0`, to get the interface name you can call `/network/info`. You can use `default` to get the primary interface |
-| registry | A registry hostname defined in the container registry configuration, to get the hostname you can call `/docker/registries` |
-| service | The service name for a service on the host. |
-| backup | A valid backup slug, example `skuwe823`, to get the slug you can call `/backups` |
-| suggestion | A valid suggestion, example `clear_full_backup`, to get the suggestion you can call `/resolution` |
-| uuid | The UUID of a discovery service, to get the UUID you can call `/discovery` |
+| backup | A valid backup slug, example `skuwe823`, to get the slug you can call `/backups` |
+| bootid | An identifier for a specific boot of host system or an integer offset from the current boot. See `/host/logs/boots/` for more details |
+| check | The slug for a check in Supervisor's resolution manager, call `/resolution/info` to see the list of options in the `checks` field |
+| device | A UUID or device path for an NVMe device available on the host, call `/host/info` to get a list of options in the `nvme_devices` field |
+| identifier | A syslog identifier from systemd journal, call `/host/logs/identifiers` to get a complete list of options |
+| interface | A valid interface name, example `eth0`, to get the interface name you can call `/network/info`. You can use `default` to get the primary interface |
+| mount | Name of a mount that exists in Supervisor, call `/mounts` to get a list of options |
+| registry | A registry hostname defined in the container registry configuration, to get the hostname you can call `/docker/registries` |
+| respository | The slug for a respository in Supervisor's add-on store, call `/store/repositories` to get a list of options |
+| service | The service name for a service on the host, call `/host/services` to get a list of options |
+| suggestion | A valid suggestion, example `clear_full_backup`, to get the suggestion you can call `/resolution` |
+| uuid | The UUID of a discovery service, to get the UUID you can call `/discovery` |
+| vlan | The id for a vlan network device in network manager on the host. Should be an integer |
diff --git a/docs/api/supervisor/models.md b/docs/api/supervisor/models.md
index cb00f0dd928..61c27d4c598 100644
--- a/docs/api/supervisor/models.md
+++ b/docs/api/supervisor/models.md
@@ -355,3 +355,10 @@ Response only fields will be in responses but cannot be included in requests.
| name | string | Name of the filesystem (if known) |
| system | boolean | `true` if filesystem considered a system/internal device |
| mount_points | list | List of paths where the filesystem is mounted. |
+
+## NVMe Device
+
+| key | type | description |
+| ---- | ------- | ---------------------------------------------------- |
+| id | string | UUID (unique identifier) for the device |
+| path | string | Device path on the host system (e.g. `/dev/nvme0n1`) |