Home Assistant OS 12.1

[sairon]

Home Assistant Operating System

• Start HA CLI interactively and with a tty allocated (Start HA CLI interactively and with a tty allocated #3238) @agners

Build System

• Fix test_restore_ssl_directory with HA CLI in interactive PTY (Fix test_restore_ssl_directory with HA CLI in interactive PTY #3239) @sairon
• Bump docker/build-push-action from 5.1.0 to 5.2.0 (Bump docker/build-push-action from 5.1.0 to 5.2.0 #3235) @dependabot
• Bump docker/setup-buildx-action from 3.0.0 to 3.1.0 (Bump docker/setup-buildx-action from 3.0.0 to 3.1.0 #3221) @dependabot

Raspberry Pi

• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Disable UAS via usb-storage.quirks on RPi for JMicron JMS567 (Disable UAS via usb-storage.quirks on RPi for JMicron JMS567 #3220) @sairon

Home Assistant Yellow

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Disable UAS via usb-storage.quirks on RPi for JMicron JMS567 (Disable UAS via usb-storage.quirks on RPi for JMicron JMS567 #3220) @sairon

Home Assistant Green

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Linux: Update kernel to 6.6.20 (Linux: Update kernel to 6.6.20 #3218) @sairon

Open Virtual Appliance

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Linux: Update kernel to 6.6.20 (Linux: Update kernel to 6.6.20 #3218) @sairon

Generic x86-64

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Add Intel Wireless-N 105 firmware for generic-x86-64 (Add Intel Wireless-N 105 firmware for generic-x86-64 #3219) @sairon
• Linux: Update kernel to 6.6.20 (Linux: Update kernel to 6.6.20 #3218) @sairon

Hardkernel ODROID

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Linux: Update kernel to 6.6.20 (Linux: Update kernel to 6.6.20 #3218) @sairon

ASUS Tinker

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Linux: Update kernel to 6.6.20 (Linux: Update kernel to 6.6.20 #3218) @sairon

Khadas VIM Series

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Linux: Update kernel to 6.6.20 (Linux: Update kernel to 6.6.20 #3218) @sairon

Generic aarch64

• Revert back to OOT driver for RTL8821CU (Revert back to OOT driver for RTL8821CU #3225) @sairon
• Revert USB core changes to workaround Z-Wave stick issues (Revert USB core changes to workaround Z-Wave stick issues #3224) @sairon
• Linux: Update kernel to 6.6.20 (Linux: Update kernel to 6.6.20 #3218) @sairon

---

This discussion was created from the release Home Assistant OS 12.1.

[MillsyBot]

Sorry about all the rollbacks. Keep fighting the good fight.

[I522I]

balenaEtcher does not open the x86-64 12.1.
It says, it is a virus.