Home Assistant OS 14.0.rc2

[sairon]

Home Assistant Operating System

• Enable Cypress M8 USB serial driver for all targets (Enable Cypress M8 USB serial driver for all targets #3693) @sairon

Raspberry Pi

• Disable UAS via usb-storage.quirks on RPi for JMicron JMS583 (Disable UAS via usb-storage.quirks on RPi for JMicron JMS583 #3687) @RubenKelevra

Home Assistant Yellow

• Sync Yellow's DTS with plain CM5 device tree (Sync Yellow's DTS with plain CM5 device tree #3688) @sairon
• Always use NVMe datadisk on Yellow if it's present on first boot (Always use NVMe datadisk on Yellow if it's present on first boot #3686) @sairon

---

This discussion was created from the release Home Assistant OS 14.0.rc2.

[Anto79-ops]

There are no issues on my NUC 12 (x86-64, bare-metal) with USB SkyConnect and USB Aeotec Z-Stick 7.

The system is running normally.

[Ladenburg1]

Unable to install the rc2 on my Raspi5 with an nvme
After updating the raspi hangs. Had to reboot by switching the power