Home Assistant OS 15.1.rc1

[sairon]

Home Assistant Operating System

• Update Docker to v28.0.4 (Update Docker to v28.0.4 #3974) @sairon
• Update generic_raw_uart and eq3_char_loop to latest versions (update generic_raw_uart and eq3_char_loop to latest versions #3964) @jens-maus

Raspberry Pi

• Set initial_turbo=0 in config.txt on Raspberry Pi 3 (Set initial_turbo=0 in config.txt on Raspberry Pi 3 #3973) @sairon
• Backport RPi patches for PIO/RP1 firmware probing errors (Backport RPi patches for PIO/RP1 firmware probing errors #3972) @sairon

Home Assistant Yellow

• Backport RPi patches for PIO/RP1 firmware probing errors (Backport RPi patches for PIO/RP1 firmware probing errors #3972) @sairon

Home Assistant Green

• Linux: Update kernel to 6.12.20 (Linux: Update kernel to 6.12.20 #3971) @sairon

Open Virtual Appliance

• Linux: Update kernel to 6.12.20 (Linux: Update kernel to 6.12.20 #3971) @sairon
• Add Mellanox ConnectX-3 NIC support for kernel 6.12 (Add Mellanox ConnectX-3 NIC support for kernel 6.12 #3969) @greyltc
• Change i915 to module for proper initialization in VM passthrough (Change i915 to module for proper initialization in VM passthrough #3959) @sairon

Generic x86-64

• Linux: Update kernel to 6.12.20 (Linux: Update kernel to 6.12.20 #3971) @sairon
• Add Mellanox ConnectX-3 NIC support for kernel 6.12 (Add Mellanox ConnectX-3 NIC support for kernel 6.12 #3969) @greyltc
• Enable amdgpu SI and CIK support for x86 (Enable amdgpu SI and CIK support for x86 #3957) @sairon

Hardkernel ODROID

• Linux: Update kernel to 6.12.20 (Linux: Update kernel to 6.12.20 #3971) @sairon
• Add patches missing for ODROID-N2/C2/C4 to fix missing serial/I2C (Add patches missing for ODROID-N2/C2/C4 to fix missing serial/I2C #3947) @sairon
• Move ODROID-N2/C2/C4 U-Boot patch to correct folder to fix eMMC issues (Move ODROID-N2/C2/C4 U-Boot patch to correct folder to fix eMMC issues #3946) @sairon

ASUS Tinker

• Linux: Update kernel to 6.12.20 (Linux: Update kernel to 6.12.20 #3971) @sairon

Khadas VIM Series

• Linux: Update kernel to 6.12.20 (Linux: Update kernel to 6.12.20 #3971) @sairon

Generic aarch64

• Linux: Update kernel to 6.12.20 (Linux: Update kernel to 6.12.20 #3971) @sairon

Build System

• Add landing page test to the basic test set (Add landing page test to the basic test set #3928) @sairon

Dependencies

• Bump docker/login-action from 3.3.0 to 3.4.0 (Bump docker/login-action from 3.3.0 to 3.4.0 #3934) @dependabot[bot]

---

This discussion was created from the release Home Assistant OS 15.1.rc1.

[Anto79-ops]

There are no issues on installation and bootup on my NUC 12 (x86-64, bare-metal) with USB SkyConnect and USB Aeotec Z-Stick 7.

The system is running normally.

[huizebruin]

Is this the one with te fix for the HP T620 amd fix ?
and how can i try it because i don't see it at my update screen on Home assistant OS on the T620.

[frkazid]

While 15.0 ended with "Home Assistant CLI not Starting" I can confirm that this release works with my Fujitsu S920 with AMD GX-222GC. Thank you for your work :-)