Home Assistant OS 15.2

[sairon]

Home Assistant Operating System

• Allow for fluctuation of MemTotal for automatic swapfile size (Allow for fluctuation of MemTotal for automatic swapfile size #4016) @sairon

Home Assistant Green

• Linux: Update kernel to 6.12.23 (Linux: Update kernel to 6.12.23 #4017) @sairon

Open Virtual Appliance

• Linux: Update kernel to 6.12.23 (Linux: Update kernel to 6.12.23 #4017) @sairon
• Backport realtek phy driver changes for RTL8125D (Backport realtek phy driver changes for RTL8125D #4014) @sairon
• Backport RTL8125D (rev C, XID 688) support (Backport RTL8125D (rev C, XID 688) support #4011) @sairon

Generic x86-64

• Linux: Update kernel to 6.12.23 (Linux: Update kernel to 6.12.23 #4017) @sairon
• Backport realtek phy driver changes for RTL8125D (Backport realtek phy driver changes for RTL8125D #4014) @sairon
• Disable amdgpu SI/CIK support and backport upstream patch to prevent crashes (Disable amdgpu SI/CIK support and backport upstream patch to prevent crashes #4013) @sairon
• Backport RTL8125D (rev C, XID 688) support (Backport RTL8125D (rev C, XID 688) support #4011) @sairon

Hardkernel ODROID

• Linux: Update kernel to 6.12.23 (Linux: Update kernel to 6.12.23 #4017) @sairon

ASUS Tinker

• Linux: Update kernel to 6.12.23 (Linux: Update kernel to 6.12.23 #4017) @sairon

Khadas VIM Series

• Linux: Update kernel to 6.12.23 (Linux: Update kernel to 6.12.23 #4017) @sairon

Generic aarch64

• Linux: Update kernel to 6.12.23 (Linux: Update kernel to 6.12.23 #4017) @sairon
• Enable driver for 1-wire temperature sensors for generic-aarch64 (Enable driver for 1-wire temperature sensors for generic-aarch64 #4015) @michalsimek
• Backport realtek phy driver changes for RTL8125D (Backport realtek phy driver changes for RTL8125D #4014) @sairon
• Backport RTL8125D (rev C, XID 688) support (Backport RTL8125D (rev C, XID 688) support #4011) @sairon

Build System

• Add tests for checking connectivity, fix Supervisor update test (Add tests for checking connectivity, fix Supervisor update test #4008) @sairon

---

This discussion was created from the release Home Assistant OS 15.2.

[michalsimek]

Works fine on AMD/Xilinx KD240 HW.

[Anto79-ops]

There are no issues on installation and bootup on my NUC 12 (x86-64, bare-metal) with USB SkyConnect and USB Aeotec Z-Stick 7.

The system is running normally.

[keithr59]

Home Assistant Green updated from 15.1 to 15.2. All OK.

[oksakoor]

I am stuck. So far 40 minutes tries to install but not finished yet.
Edited: 1 hour later failed and new attempt finished.

[juanlu-sanz]

I have 2 rpi4

• No errors on a Rpi4 installation
• On the other HA does not start up, it gets stuck on "waiting for HA CLI" and by manually changing the DNS and forcing it to 1.1.1.1 it boots ONCE. If I reboot again it goes back to giving errors.

This has never happened before

[Lassska]

Yupeeeee After 15.2 update zigbee mi2 (3001-0125) work again

[brugk000]

No problems on HP T620. Thanks
Also no problems on proxmox haos

[RaSch75]

on RPI4: Lovelace interface hangs maybe an hour after the update to 15.2. Background automations still worked - but the interface not accessible either local or through Nabu. Downgrade after reset to 15.1 works stable now for half a day, so it looks really like a 15.2 issue. (Also checked was the core update to 2025.4.2 that seems innocent, as well as the Z-Wave JS UI update that did not showed to be the core of the trouble)

[rickgardner077]

No errors on VM on Unraid 6.12.15. Thanks

[hocomadvies]

After having trouble installing 15.1 also 15.2 is not willing to install on my Proxmox vm with Home Assistant. Tried several times over the last past weeks. No success. Managed to update the core to the latest version dough 2025.4.3.

Core 2025.4.3 Supervisor 2025.04.0 Operating System 14.2 Frontend 20250411.0

Update using settings updates and also trough the CLI .
`➜ ~ ha os update --version 15.2
Processing... Done.

Post "http://supervisor/os/update": context deadline exceeded (Client.Timeout exceeded while awaiting headers)`

I managed to wget the update file:

➜ ~ wget https://os-artifacts.home-assistant.io/15.2/haos_ova-15.2.raucb
So how can I use that download for the update?

Any suggestions how to get this going? Or just wait till the next version? Any help appreciated. Thanks.

[hocomadvies]

Solved my problems by removing the VM and creating a new one using the proxmox HA script. Now all is up to date and working again. So must have been something in the VM blocking things.

[Guruleenyc]

Upgraded successfully without issue from 14.2 to 15.1 x86 on a Lenovo Thinkcentre M72e. 👊👍👏

[RenseM3]

I’m running a Odroid for HA. And i don’t dare to update to 15.2 since last try to update to 15.1 went horribly and catastrophicly wrong 😑

can someone confirm this update is safe?

Thanks in advance