Ständiger Zeitabgleich und DPL friert ein

[Keule31]

Hallo zusammen,

1. schon bei der Version vom 23.01.2025 und auch bei der aktuellen 10.02.2025 ist mir aufgefallen, das die DTU ständig einen Zeitabgleich durchführt, mindestens 30 mal am Tag.
   Muss das jetzt so sein oder liegt es an etwas anderem?

2. Ebsenso friert nach einer gewissen Zeit die DPL Reglung vom 2ten WR ein und wird nicht bei Leistungsanforderung erhöht.

Hardware: 1x HM1500 1x HM800 1x DTU Fusion

Bei der Version vom 10.01.2025 funktioniert Punkt 1+2 fehlerfrei.

Danke für die Hilfe

[Gururom]

Zeitabgleich habe ich auch seit der neuen Version, auch schon bei der Testversion dazu. Mal ists es so, andere Tage nicht. Gründe weiß ich nicht, scheinbar jedoch ohne Auswirkung.

Das andere Problem mit dem einfrieren (nicht nur bei einem zweiten WR) habe ich auch beobachtet, meiner Meinung nach bei jeder Version nach der 2024.10.22, darum bin ich immer wieder (unter anderen) zurück geswitcht.
Bei dieser Version muß ich das noch etwas beobachten, komme aber ausführlich wohl erst am WE dazu.
Wenn ich in der Historie meines WR-Shellys schaue, siehts aber alles recht gleichmäßig und vernünftig aus.

[AndreasBoehm]

Kannst du bitte mit aktiviertem verbose logging im DPL einen Auszug aus der Konsole bereitstellen wenn dein zweiter WR hängen bleibt?

Sind beider WRs Solar Betrieben, nutzt du eine Batterie?

[Keule31]

Solar Betrieben

[Keule31]

Keine Batterie

[AndreasBoehm]

Kannst du bitte mit aktiviertem verbose logging im DPL einen Auszug aus der Konsole bereitstellen wenn dein zweiter WR hängen bleibt?

[Solarteur]

Ergänzende Information: Das Problem ist auch im upstream-Projekt schon mehrmals angesprochen worden, Zitate dazu in diesem Beitrag
#1604

Bei meiner Anlage
2xHM600 solarbetrieben
1xHM800 an Pylontech US2000C
1xHuawei R4850G2

tritt der häufige Zeitabgleich auch ab und zu auf. Dabei wird die Betriebszeit zurückgestzt (Reset Grund CPU 0 und 1: Software reset CPU),
ansonsten läuft das System weiter, ich habe allerdings außer den Shellys keine weitere Aufzeichnung.

Konsolenauzug versuche ich weiter, ist allerdings bei tagelangem problemlosem Betrieb nicht einfach.

[gitisgreat2023]

Bei mir ist der uptime auch kurz. zB jetzt 2x in 24 Stunden war Software reset CPU für beide CPUs.
Da rebootet er nicht wirklich? Oder habe ich das jetzt falsch verstanden?

[schlimmchen]

Was denn? Die Uptime ist die Zeit seit dem letzten Neustart, egal aus welchem Grund. Wenn die Uptime klein ist und du das Gerät nicht absichtlich neu gestartet hast, dann hat es selbst neu gestartet.

[gitisgreat2023]

Okay dann werde ich mal demnächst loggen. Uptime schwankt zwischen 6 Stunden und 1-2 Tage bevor er rebootet, aus irgendwelchem Grund.

[Keule31]

Hat das noch etwas mit dem Zeitabgleich zu tun oder schweifen wir hier gerade vom Thema ab...?

[Keule31]

Hallo Andreas, versuche gerade das Problem zu reproduzieren. Am Mo., 17. Feb. 2025 um 10:40 Uhr schrieb Andreas Böhm < ***@***.***>:

…

Kannst du bitte mit aktiviertem verbose logging im DPL einen Auszug aus der Konsole bereitstellen wenn dein zweiter WR hängen bleibt? — Reply to this email directly, view it on GitHub <#1633 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/BCJUX4K4JIY3ZCN5RO5R5LL2QGU7HAVCNFSM6AAAAABW7UKR6KVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTEMRSGI2TANQ> . You are receiving this because you authored the thread.Message ID: ***@***.*** com>

[AndreasBoehm]

Sorry, aber damit kann ich nichts anfangen, da ist alles in einer Zeile, das kann ja keiner lesen

[Keule31]

Sorry, habe ich auch gerade gesehen, weiß nur noch nicht wie ich es besser formatiert bekomme, musste es am Handy auslesen.....

[Keule31]

Log

15:43:25.106 >     solar-powered, producing 389 W
15:43:25.147 >     lower/current/upper limit: 52/408/1500 W, output capability: 1500 W
15:43:25.216 >     sending commands enabled, reachable, eligible
15:43:25.246 >     max reduction production/standby: 337/337 W, max increase: 544 W
15:43:25.274 >     target limit/output/state: -1 W (unchanged)/389 W/unchanged, 0 update timeouts
15:43:25.336 >     MPPTs AC power: a: 183 W b: 207 W
15:43:25.410 > [DPL inverter 114190549952]:
15:43:25.474 >     solar-powered, producing 87 W
15:43:25.525 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:25.568 >     sending commands enabled, reachable, eligible
15:43:25.611 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:43:25.654 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:43:25.714 >     MPPTs AC power: a: 44 W b: 43 W
15:43:25.762 > [DPL] targeting -100 W, base load is 250 W, power meter reads -105.2 W (valid)
15:43:25.805 > [DPL] inverter 116183300688 is behind power meter producing 389 W
15:43:25.861 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:43:25.903 > [DPL] requesting 471 W from 2 solar-powered inverters currently producing 476 W (diff -5 W, hysteresis 10 W)
15:43:25.949 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
15:43:26.003 > [DPL inverter 116183300688]:
15:43:26.078 >     solar-powered, producing 389 W
15:43:26.119 >     lower/current/upper limit: 52/408/1500 W, output capability: 1500 W
15:43:26.160 >     sending commands enabled, reachable, eligible
15:43:26.201 >     max reduction production/standby: 337/337 W, max increase: 544 W
15:43:26.241 >     target limit/output/state: -1 W (unchanged)/389 W/unchanged, 0 update timeouts
15:43:26.295 >     MPPTs AC power: a: 183 W b: 207 W
15:43:26.435 > [DPL inverter 114190549952]:
15:43:26.491 >     solar-powered, producing 87 W
15:43:26.533 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:26.576 >     sending commands enabled, reachable, eligible
15:43:26.618 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:43:26.661 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:43:26.702 >     MPPTs AC power: a: 44 W b: 43 W
15:43:26.755 > Fetch inverter: 116183300688
15:43:26.796 > Queue size - NRF: 1 CMT: 0
15:43:26.827 > [DPL] the system is stable, the last power limit is still valid
15:43:26.882 > [PowerMeterHttpJson] New total: -105.73
15:43:27.047 > Middle missing
15:43:27.151 > Request retransmit: 1
15:43:27.213 > Success
15:43:27.344 > [DPL] targeting -100 W, base load is 250 W, power meter reads -105.7 W (valid)
15:43:27.419 > [DPL] inverter 116183300688 is behind power meter producing 390 W
15:43:27.587 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:43:27.629 > [DPL] requesting 471 W from 2 solar-powered inverters currently producing 477 W (diff -6 W, hysteresis 10 W)
15:43:27.671 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
15:43:27.830 > [DPL inverter 116183300688]:
15:43:28.076 >     solar-powered, producing 390 W
15:43:28.210 >     lower/current/upper limit: 52/408/1500 W, output capability: 1500 W
15:43:28.312 >     sending commands enabled, reachable, eligible
15:43:28.365 >     max reduction production/standby: 338/338 W, max increase: 544 W
15:43:28.406 >     target limit/output/state: -1 W (unchanged)/390 W/unchanged, 0 update timeouts
15:43:28.463 >     MPPTs AC power: a: 184 W b: 207 W
15:43:28.519 > [DPL inverter 114190549952]:
15:43:28.689 >     solar-powered, producing 87 W
15:43:28.731 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:28.771 >     sending commands enabled, reachable, eligible
15:43:28.816 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:43:28.862 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:43:28.919 >     MPPTs AC power: a: 44 W b: 43 W
15:43:28.959 > [DPL] targeting -100 W, base load is 250 W, power meter reads -105.7 W (valid)
15:43:28.998 > [DPL] inverter 116183300688 is behind power meter producing 390 W
15:43:29.039 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:43:29.074 > [DPL] requesting 471 W from 2 solar-powered inverters currently producing 477 W (diff -6 W, hysteresis 10 W)
15:43:29.113 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
15:43:29.169 > [DPL inverter 116183300688]:
15:43:29.299 >     solar-powered, producing 390 W
15:43:29.339 >     lower/current/upper limit: 52/408/1500 W, output capability: 1500 W
15:43:29.377 >     sending commands enabled, reachable, eligible
15:43:29.418 >     max reduction production/standby: 338/338 W, max increase: 544 W
15:43:29.458 >     target limit/output/state: -1 W (unchanged)/390 W/unchanged, 0 update timeouts
15:43:29.516 >     MPPTs AC power: a: 184 W b: 207 W
15:43:29.563 > [DPL inverter 114190549952]:
15:43:29.603 >     solar-powered, producing 87 W
15:43:29.639 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:29.679 >     sending commands enabled, reachable, eligible
15:43:29.717 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:43:29.757 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:43:29.814 >     MPPTs AC power: a: 44 W b: 43 W
15:43:29.871 > Fetch inverter: 114190549952
15:43:29.930 > Queue size - NRF: 1 CMT: 0
15:43:30.019 > Success
15:43:30.074 > [PowerMeterHttpJson] New total: -113.38
15:43:30.126 > [DPL] targeting -100 W, base load is 250 W, power meter reads -113.4 W (valid)
15:43:30.167 > [DPL] inverter 116183300688 is behind power meter producing 390 W
15:43:30.216 > [DPL] inverter 114190549952 is behind power meter producing 91 W
15:43:30.261 > [DPL] requesting 468 W from 2 solar-powered inverters currently producing 481 W (diff -13 W, hysteresis 10 W)
15:43:30.315 > [DPL inverter 116183300688]:
15:43:30.422 >     expected AC power per MPPT 200 W
15:43:30.482 >     MPPT-a AC power 184 W
15:43:30.542 >     MPPT-b AC power 207 W
15:43:30.583 >     1/2 mppts are not-producing/shaded, scaling 386 W
15:43:30.628 > [DPL] will cover 468 W using 2 solar-powered inverters
15:43:30.670 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 0 W AC
15:43:30.711 > [DPL inverter 116183300688]:
15:43:30.742 >     solar-powered, producing 390 W
15:43:30.779 >     lower/current/upper limit: 52/408/1500 W, output capability: 1500 W
15:43:30.823 >     sending commands enabled, reachable, eligible
15:43:30.866 >     max reduction production/standby: 338/338 W, max increase: 544 W
15:43:30.905 >     target limit/output/state: 386 W (update)/377 W/production, 0 update timeouts
15:43:30.959 >     MPPTs AC power: a: 184 W b: 207 W
15:43:31.041 > [DPL inverter 114190549952]:
15:43:31.143 >     solar-powered, producing 91 W
15:43:31.180 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:31.222 >     sending commands enabled, reachable, eligible
15:43:31.335 >     max reduction production/standby: 65/65 W, max increase: 0 W
15:43:31.384 >     target limit/output/state: -1 W (unchanged)/91 W/unchanged, 0 update timeouts
15:43:31.448 >     MPPTs AC power: a: 46 W b: 45 W
15:43:31.543 > [DPL inverter 116183300688]: sending limit of 25.7 % (386 W respectively), max output is 1500 W
15:43:31.593 > [DPL] waiting for a start/stop/restart/limit command to complete
15:43:31.646 > Fetch inverter: 116183300688
15:43:31.704 > Queue size - NRF: 2 CMT: 0
15:43:31.863 > [PowerMeterHttpJson] New total: -98.83
15:43:31.920 > All missing
15:43:32.062 > Nothing received, resend whole request
15:43:32.130 > Fetch inverter: 114190549952
15:43:32.183 > Queue size - NRF: 3 CMT: 0
15:43:32.243 > [PowerMeterHttpJson] New total: -98.98
15:43:32.372 > All missing
15:43:32.476 > Nothing received, resend whole request
15:43:32.680 > Fetch inverter: 116183300688
15:43:32.739 > Queue size - NRF: 3 CMT: 0
15:43:32.799 > [PowerMeterHttpJson] New total: -98.83
15:43:32.851 > All missing
15:43:32.910 > Nothing received, resend whole request
15:43:32.967 > Fetch inverter: 114190549952
15:43:33.020 > Queue size - NRF: 3 CMT: 0
15:43:33.069 > [PowerMeterHttpJson] New total: 1861.62
15:43:33.716 > All missing
15:43:33.743 > Nothing received, resend whole request
15:43:34.651 > Fetch inverter: 116183300688
15:43:34.706 > Queue size - NRF: 3 CMT: 0
15:43:34.850 > [PowerMeterHttpJson] New total: 1851.33
15:43:35.577 > [DPL] waiting for a start/stop/restart/limit command to complete
15:43:35.783 > Success
15:43:36.271 > [DPL inverter 116183300688]: actual limit is 25.7 % (386 W respectively), effective 10185 ms after update started, requested were 25.7 %
15:43:36.392 > [DPL] waiting for sufficiently recent inverter data
15:43:36.601 > Middle missing
15:43:36.694 > Request retransmit: 3
15:43:36.751 > Middle missing
15:43:36.807 > Request retransmit: 3
15:43:36.979 > Success
15:43:37.043 > [DPL] waiting for sufficiently recent power meter reading
15:43:37.074 > Fetch inverter: 114190549952
15:43:37.133 > Queue size - NRF: 1 CMT: 0
15:43:37.283 > Success
15:43:37.340 > [PowerMeterHttpJson] New total: 1849.86
15:43:38.551 > Fetch inverter: 116183300688
15:43:38.602 > Queue size - NRF: 1 CMT: 0
15:43:39.151 > [PowerMeterHttpJson] New total: 1848.08
15:43:39.260 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1848.1 W (valid)
15:43:39.465 > [DPL] inverter 116183300688 is behind power meter producing 383 W
15:43:39.524 > [DPL] inverter 114190549952 is behind power meter producing 91 W
15:43:39.574 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 474 W (diff 1826 W, hysteresis 10 W)
15:43:39.632 > [DPL inverter 116183300688]:
15:43:39.692 >     expected AC power per MPPT 188 W
15:43:39.751 >     MPPT-a AC power 188 W
15:43:39.840 >     MPPT-b AC power 195 W
15:43:39.928 > [DPL] will cover 1591 W using 2 solar-powered inverters
15:43:39.976 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 709 W AC
15:43:40.031 > [DPL inverter 116183300688]:
15:43:40.083 >     solar-powered, producing 383 W
15:43:40.142 >     lower/current/upper limit: 52/385/1500 W, output capability: 1500 W
15:43:40.178 >     sending commands enabled, reachable, eligible
15:43:40.217 >     max reduction production/standby: 331/331 W, max increase: 1117 W
15:43:40.258 >     target limit/output/state: 1500 W (update)/1500 W/production, 0 update timeouts
15:43:40.314 >     MPPTs AC power: a: 188 W b: 195 W
15:43:40.371 > [DPL inverter 114190549952]:
15:43:40.456 >     solar-powered, producing 91 W
15:43:40.502 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:40.542 >     sending commands enabled, reachable, eligible
15:43:40.584 >     max reduction production/standby: 65/65 W, max increase: 0 W
15:43:40.630 >     target limit/output/state: -1 W (unchanged)/91 W/unchanged, 0 update timeouts
15:43:40.692 >     MPPTs AC power: a: 46 W b: 45 W
15:43:40.747 > [DPL inverter 116183300688]: sending limit of 100.0 % (1500 W respectively), max output is 1500 W
15:43:40.791 > Middle missing
15:43:40.843 > Request retransmit: 3
15:43:40.898 > [DPL] waiting for a start/stop/restart/limit command to complete
15:43:40.959 > Success
15:43:41.067 > Fetch inverter: 114190549952
15:43:41.123 > Queue size - NRF: 2 CMT: 0
15:43:41.178 > [PowerMeterHttpJson] New total: 1774.89
15:43:41.287 > Success
15:43:41.361 > [DPL inverter 116183300688]: actual limit is 100.0 % (1500 W respectively), effective 2177 ms after update started, requested were 100.0 %
15:43:41.405 > [DPL] waiting for sufficiently recent inverter data
15:43:41.813 > Success
15:43:42.632 > Fetch inverter: 116183300688
15:43:42.709 > Queue size - NRF: 2 CMT: 0
15:43:42.823 > [PowerMeterHttpJson] New total: 1773.52
15:43:43.152 > Middle missing
15:43:43.365 > Request retransmit: 3
15:43:43.560 > Success
15:43:43.656 > [DPL] waiting for sufficiently recent power meter reading
15:43:44.270 > Middle missing
15:43:44.377 > Request retransmit: 1
15:43:44.476 > Success
15:43:44.582 > Fetch inverter: 114190549952
15:43:44.680 > Queue size - NRF: 2 CMT: 0
15:43:44.889 > [PowerMeterHttpJson] New total: 1775.20
15:43:45.203 > Last missing
15:43:45.401 > Request retransmit: 3
15:43:45.500 > Success
15:43:46.016 > Middle missing
15:43:46.319 > Request retransmit: 4
15:43:46.429 > Middle missing
15:43:46.728 > Request retransmit: 5
15:43:46.836 > Middle missing
15:43:46.894 > Request retransmit: 6
15:43:46.990 > Success
15:43:47.021 > Fetch inverter: 116183300688
15:43:47.059 > Queue size - NRF: 2 CMT: 0
15:43:47.119 > [PowerMeterHttpJson] New total: 1776.90
15:43:47.194 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1776.9 W (valid)
15:43:47.239 > [DPL] inverter 116183300688 is behind power meter producing 444 W
15:43:47.304 > [DPL] inverter 114190549952 is behind power meter producing 89 W
15:43:47.347 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 533 W (diff 1767 W, hysteresis 10 W)
15:43:47.385 > [DPL] will cover 533 W using 2 solar-powered inverters
15:43:47.426 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1767 W AC
15:43:47.481 > [DPL inverter 116183300688]:
15:43:47.539 >     solar-powered, producing 444 W
15:43:47.607 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:47.660 >     sending commands enabled, reachable, eligible
15:43:47.704 >     max reduction production/standby: 392/392 W, max increase: 0 W
15:43:47.748 >     target limit/output/state: -1 W (unchanged)/444 W/unchanged, 0 update timeouts
15:43:47.803 >     MPPTs AC power: a: 191 W b: 254 W
15:43:47.865 > [DPL inverter 114190549952]:
15:43:48.030 >     solar-powered, producing 89 W
15:43:48.115 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:48.159 >     sending commands enabled, reachable, eligible
15:43:48.199 >     max reduction production/standby: 63/63 W, max increase: 0 W
15:43:48.243 >     target limit/output/state: -1 W (unchanged)/89 W/unchanged, 0 update timeouts
15:43:48.347 >     MPPTs AC power: a: 45 W b: 44 W
15:43:48.386 > [DPL] the system is stable, the last power limit is still valid
15:43:48.448 > Middle missing
15:43:48.528 > Request retransmit: 3
15:43:48.556 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1776.9 W (valid)
15:43:48.592 > [DPL] inverter 116183300688 is behind power meter producing 444 W
15:43:48.633 > [DPL] inverter 114190549952 is behind power meter producing 89 W
15:43:48.684 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 533 W (diff 1767 W, hysteresis 10 W)
15:43:48.741 > [DPL] will cover 533 W using 2 solar-powered inverters
15:43:48.783 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1767 W AC
15:43:48.831 > [DPL inverter 116183300688]:
15:43:48.891 >     solar-powered, producing 444 W
15:43:49.037 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:49.071 >     sending commands enabled, reachable, eligible
15:43:49.114 >     max reduction production/standby: 392/392 W, max increase: 0 W
15:43:49.154 >     target limit/output/state: -1 W (unchanged)/444 W/unchanged, 0 update timeouts
15:43:49.209 >     MPPTs AC power: a: 191 W b: 254 W
15:43:49.360 > [DPL inverter 114190549952]:
15:43:49.474 >     solar-powered, producing 89 W
15:43:49.548 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:49.591 >     sending commands enabled, reachable, eligible
15:43:49.641 >     max reduction production/standby: 63/63 W, max increase: 0 W
15:43:49.682 >     target limit/output/state: -1 W (unchanged)/89 W/unchanged, 0 update timeouts
15:43:49.740 >     MPPTs AC power: a: 45 W b: 44 W
15:43:49.796 > Success
15:43:49.842 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1776.9 W (valid)
15:43:49.882 > [DPL] inverter 116183300688 is behind power meter producing 458 W
15:43:49.922 > [DPL] inverter 114190549952 is behind power meter producing 89 W
15:43:49.961 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 547 W (diff 1753 W, hysteresis 10 W)
15:43:50.023 > [DPL] will cover 547 W using 2 solar-powered inverters
15:43:50.161 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1753 W AC
15:43:50.219 > [DPL inverter 116183300688]:
15:43:50.287 >     solar-powered, producing 458 W
15:43:50.321 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:50.365 >     sending commands enabled, reachable, eligible
15:43:50.409 >     max reduction production/standby: 406/406 W, max increase: 0 W
15:43:50.465 >     target limit/output/state: -1 W (unchanged)/458 W/unchanged, 0 update timeouts
15:43:50.523 >     MPPTs AC power: a: 190 W b: 268 W
15:43:50.579 > [DPL inverter 114190549952]:
15:43:50.635 >     solar-powered, producing 89 W
15:43:50.688 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:50.736 >     sending commands enabled, reachable, eligible
15:43:50.780 >     max reduction production/standby: 63/63 W, max increase: 0 W
15:43:50.821 >     target limit/output/state: -1 W (unchanged)/89 W/unchanged, 0 update timeouts
15:43:50.866 >     MPPTs AC power: a: 45 W b: 44 W
15:43:50.923 > Last missing
15:43:51.095 > Request retransmit: 7
15:43:51.154 > Last missing
15:43:51.303 > Request retransmit: 8
15:43:51.353 > Middle missing
15:43:51.506 > Request retransmit: 1
15:43:51.558 > Middle missing
15:43:51.610 > Request retransmit: 4
15:43:51.662 > Success
15:43:51.716 > Fetch inverter: 114190549952
15:43:51.775 > Queue size - NRF: 2 CMT: 0
15:43:51.815 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1776.9 W (valid)
15:43:51.855 > [DPL] inverter 116183300688 is behind power meter producing 458 W
15:43:51.898 > [DPL] inverter 114190549952 is behind power meter producing 89 W
15:43:51.938 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 547 W (diff 1753 W, hysteresis 10 W)
15:43:51.983 > [DPL] will cover 547 W using 2 solar-powered inverters
15:43:52.024 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1753 W AC
15:43:52.079 > [DPL inverter 116183300688]:
15:43:52.139 >     solar-powered, producing 458 W
15:43:52.182 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:52.222 >     sending commands enabled, reachable, eligible
15:43:52.262 >     max reduction production/standby: 406/406 W, max increase: 0 W
15:43:52.303 >     target limit/output/state: -1 W (unchanged)/458 W/unchanged, 0 update timeouts
15:43:52.355 >     MPPTs AC power: a: 190 W b: 268 W
15:43:52.408 > [DPL inverter 114190549952]:
15:43:52.467 >     solar-powered, producing 89 W
15:43:52.619 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:52.658 >     sending commands enabled, reachable, eligible
15:43:52.698 >     max reduction production/standby: 63/63 W, max increase: 0 W
15:43:52.741 >     target limit/output/state: -1 W (unchanged)/89 W/unchanged, 0 update timeouts
15:43:52.799 >     MPPTs AC power: a: 45 W b: 44 W
15:43:52.838 > [PowerMeterHttpJson] New total: 1779.93
15:43:52.907 > Last missing
15:43:53.043 > Request retransmit: 2
15:43:53.095 > Last missing
15:43:53.151 > Request retransmit: 3
15:43:53.207 > Success
15:43:53.246 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1779.9 W (valid)
15:43:53.286 > [DPL] inverter 116183300688 is behind power meter producing 458 W
15:43:53.328 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:43:53.369 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 545 W (diff 1755 W, hysteresis 10 W)
15:43:53.409 > [DPL] will cover 545 W using 2 solar-powered inverters
15:43:53.450 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1755 W AC
15:43:53.503 > [DPL inverter 116183300688]:
15:43:53.559 >     solar-powered, producing 458 W
15:43:53.602 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:53.648 >     sending commands enabled, reachable, eligible
15:43:53.688 >     max reduction production/standby: 406/406 W, max increase: 0 W
15:43:53.730 >     target limit/output/state: -1 W (unchanged)/458 W/unchanged, 0 update timeouts
15:43:53.784 >     MPPTs AC power: a: 190 W b: 268 W
15:43:53.863 > [DPL inverter 114190549952]:
15:43:53.923 >     solar-powered, producing 87 W
15:43:53.969 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:54.013 >     sending commands enabled, reachable, eligible
15:43:54.055 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:43:54.094 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:43:54.147 >     MPPTs AC power: a: 44 W b: 44 W
15:43:54.211 > Last missing
15:43:54.271 > Request retransmit: 7
15:43:54.374 > Success
15:43:54.476 > Fetch inverter: 116183300688
15:43:54.576 > Queue size - NRF: 1 CMT: 0
15:43:54.675 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1779.9 W (valid)
15:43:54.720 > [DPL] inverter 116183300688 is behind power meter producing 458 W
15:43:54.750 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:43:54.792 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 545 W (diff 1755 W, hysteresis 10 W)
15:43:54.831 > [DPL] will cover 545 W using 2 solar-powered inverters
15:43:54.862 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1755 W AC
15:43:54.921 > [DPL inverter 116183300688]:
15:43:55.091 >     solar-powered, producing 458 W
15:43:55.141 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:55.187 >     sending commands enabled, reachable, eligible
15:43:55.233 >     max reduction production/standby: 406/406 W, max increase: 0 W
15:43:55.279 >     target limit/output/state: -1 W (unchanged)/458 W/unchanged, 0 update timeouts
15:43:55.335 >     MPPTs AC power: a: 190 W b: 268 W
15:43:55.392 > [DPL inverter 114190549952]:
15:43:55.495 >     solar-powered, producing 87 W
15:43:55.541 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:55.598 >     sending commands enabled, reachable, eligible
15:43:55.665 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:43:55.693 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:43:55.746 >     MPPTs AC power: a: 44 W b: 44 W
15:43:55.798 > [PowerMeterHttpJson] New total: 1778.22
15:43:55.883 > Middle missing
15:43:56.010 > Request retransmit: 3
15:43:56.072 > Success
15:43:56.202 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1778.2 W (valid)
15:43:56.243 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:43:56.286 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:43:56.322 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:43:56.363 > [DPL] will cover 544 W using 2 solar-powered inverters
15:43:56.423 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:43:56.523 > [DPL inverter 116183300688]:
15:43:56.572 >     solar-powered, producing 457 W
15:43:56.628 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:56.673 >     sending commands enabled, reachable, eligible
15:43:56.716 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:43:56.747 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:43:56.803 >     MPPTs AC power: a: 190 W b: 268 W
15:43:56.842 > [DPL inverter 114190549952]:
15:43:56.895 >     solar-powered, producing 87 W
15:43:56.936 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:43:56.985 >     sending commands enabled, reachable, eligible
15:43:57.028 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:43:57.079 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:43:57.139 >     MPPTs AC power: a: 44 W b: 44 W
15:43:57.195 > Fetch inverter: 114190549952
15:43:57.343 > Queue size - NRF: 1 CMT: 0
15:43:57.399 > [PowerMeterHttpJson] New total: 1777.36
15:43:57.531 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1777.4 W (valid)
15:43:57.573 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:43:57.616 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:43:57.660 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:43:57.701 > [DPL] will cover 544 W using 2 solar-powered inverters
15:43:57.743 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:43:57.804 > [DPL inverter 116183300688]:
15:43:57.951 >     solar-powered, producing 457 W
15:43:58.119 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:43:58.266 >     sending commands enabled, reachable, eligible
15:44:00.064 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:00.110 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:00.162 >     MPPTs AC power: a: 190 W b: 268 W
15:44:00.215 > [DPL inverter 114190549952]:
15:44:00.274 >     solar-powered, producing 87 W
15:44:00.393 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:00.434 >     sending commands enabled, reachable, eligible
15:44:00.475 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:00.519 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:00.572 >     MPPTs AC power: a: 44 W b: 44 W
15:44:00.720 > Last missing
15:44:00.754 > Request retransmit: 3
15:44:00.808 > Success
15:44:00.842 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1777.4 W (valid)
15:44:00.886 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:00.927 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:00.976 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:01.021 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:01.061 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:01.120 > [DPL inverter 116183300688]:
15:44:01.225 >     solar-powered, producing 457 W
15:44:01.266 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:01.307 >     sending commands enabled, reachable, eligible
15:44:01.346 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:01.385 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:01.439 >     MPPTs AC power: a: 190 W b: 268 W
15:44:01.491 > [DPL inverter 114190549952]:
15:44:01.547 >     solar-powered, producing 87 W
15:44:01.597 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:01.641 >     sending commands enabled, reachable, eligible
15:44:01.683 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:01.726 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:01.779 >     MPPTs AC power: a: 44 W b: 44 W
15:44:01.951 > Fetch inverter: 116183300688
15:44:02.047 > Queue size - NRF: 1 CMT: 0
15:44:02.101 > [PowerMeterHttpJson] New total: 1779.71
15:44:02.143 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1779.7 W (valid)
15:44:02.182 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:02.224 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:02.276 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:02.318 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:02.361 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:02.419 > [DPL inverter 116183300688]:
15:44:02.475 >     solar-powered, producing 457 W
15:44:02.516 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:02.560 >     sending commands enabled, reachable, eligible
15:44:02.616 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:02.660 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:02.712 >     MPPTs AC power: a: 190 W b: 268 W
15:44:02.740 > [DPL inverter 114190549952]:
15:44:02.795 >     solar-powered, producing 87 W
15:44:02.835 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:02.870 >     sending commands enabled, reachable, eligible
15:44:02.910 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:02.949 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:03.018 >     MPPTs AC power: a: 44 W b: 44 W
15:44:03.076 > Success
15:44:03.158 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1779.7 W (valid)
15:44:03.236 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:03.295 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:03.355 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:03.384 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:03.427 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:03.472 > [DPL inverter 116183300688]:
15:44:03.533 >     solar-powered, producing 457 W
15:44:03.596 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:03.638 >     sending commands enabled, reachable, eligible
15:44:03.692 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:03.733 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:03.787 >     MPPTs AC power: a: 190 W b: 267 W
15:44:03.843 > [DPL inverter 114190549952]:
15:44:03.900 >     solar-powered, producing 87 W
15:44:03.980 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:04.022 >     sending commands enabled, reachable, eligible
15:44:04.068 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:04.116 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:04.171 >     MPPTs AC power: a: 44 W b: 44 W
15:44:04.221 > Fetch inverter: 114190549952
15:44:04.252 > Queue size - NRF: 1 CMT: 0
15:44:04.293 > [DPL] the system is stable, the last power limit is still valid
15:44:04.335 > [PowerMeterHttpJson] New total: 1779.04
15:44:04.374 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1779.0 W (valid)
15:44:04.415 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:04.462 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:04.501 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:04.545 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:04.606 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:04.678 > [DPL inverter 116183300688]:
15:44:04.718 >     solar-powered, producing 457 W
15:44:04.748 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:04.787 >     sending commands enabled, reachable, eligible
15:44:04.863 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:04.896 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:04.979 >     MPPTs AC power: a: 190 W b: 267 W
15:44:05.270 > [DPL inverter 114190549952]:
15:44:05.474 >     solar-powered, producing 87 W
15:44:05.679 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:05.884 >     sending commands enabled, reachable, eligible
15:44:06.094 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:06.315 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:06.497 >     MPPTs AC power: a: 44 W b: 44 W
15:44:06.704 > Success
15:44:06.744 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1779.0 W (valid)
15:44:06.780 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:06.825 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:06.858 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:06.907 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:06.946 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:07.004 > [DPL inverter 116183300688]:
15:44:07.167 >     solar-powered, producing 457 W
15:44:07.212 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:07.254 >     sending commands enabled, reachable, eligible
15:44:07.294 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:07.335 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:07.387 >     MPPTs AC power: a: 190 W b: 267 W
15:44:07.439 > [DPL inverter 114190549952]:
15:44:07.493 >     solar-powered, producing 87 W
15:44:07.534 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:07.581 >     sending commands enabled, reachable, eligible
15:44:07.623 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:07.667 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:07.726 >     MPPTs AC power: a: 44 W b: 43 W
15:44:07.783 > Fetch inverter: 116183300688
15:44:07.843 > Queue size - NRF: 1 CMT: 0
15:44:07.903 > [PowerMeterHttpJson] New total: 1778.55
15:44:07.966 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1778.6 W (valid)
15:44:08.005 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:08.063 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:08.108 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:08.153 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:08.198 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:08.251 > [DPL inverter 116183300688]:
15:44:08.305 >     solar-powered, producing 457 W
15:44:08.376 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:08.414 >     sending commands enabled, reachable, eligible
15:44:08.442 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:08.485 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:08.516 >     MPPTs AC power: a: 190 W b: 267 W
15:44:08.548 > [DPL inverter 114190549952]:
15:44:08.589 >     solar-powered, producing 87 W
15:44:08.617 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:08.659 >     sending commands enabled, reachable, eligible
15:44:08.697 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:08.738 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:08.790 >     MPPTs AC power: a: 44 W b: 43 W
15:44:08.838 > Last missing
15:44:08.871 > Request retransmit: 4
15:44:08.927 > Success
15:44:08.970 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1778.6 W (valid)
15:44:09.010 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:09.051 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:09.089 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:09.131 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:09.173 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:09.227 > [DPL inverter 116183300688]:
15:44:09.283 >     solar-powered, producing 457 W
15:44:09.326 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:09.367 >     sending commands enabled, reachable, eligible
15:44:09.409 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:09.452 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:09.508 >     MPPTs AC power: a: 190 W b: 267 W
15:44:09.589 > [DPL inverter 114190549952]:
15:44:09.643 >     solar-powered, producing 87 W
15:44:09.685 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:09.727 >     sending commands enabled, reachable, eligible
15:44:09.778 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:09.818 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:09.879 >     MPPTs AC power: a: 44 W b: 43 W
15:44:09.932 > Fetch inverter: 114190549952
15:44:09.999 > Queue size - NRF: 1 CMT: 0
15:44:10.051 > [PowerMeterHttpJson] New total: 1782.59
15:44:10.111 > Success
15:44:10.164 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1782.6 W (valid)
15:44:10.198 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:10.245 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:10.286 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:10.346 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:10.394 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:10.448 > [DPL inverter 116183300688]:
15:44:10.544 >     solar-powered, producing 457 W
15:44:10.627 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:10.666 >     sending commands enabled, reachable, eligible
15:44:10.706 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:10.765 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:10.819 >     MPPTs AC power: a: 190 W b: 267 W
15:44:10.855 > [DPL inverter 114190549952]:
15:44:10.908 >     solar-powered, producing 87 W
15:44:11.047 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:11.090 >     sending commands enabled, reachable, eligible
15:44:11.243 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:11.284 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:11.339 >     MPPTs AC power: a: 44 W b: 43 W
15:44:11.382 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1782.6 W (valid)
15:44:11.427 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:11.468 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:11.510 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:11.550 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:11.599 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:11.669 > [DPL inverter 116183300688]:
15:44:11.723 >     solar-powered, producing 457 W
15:44:11.790 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:11.857 >     sending commands enabled, reachable, eligible
15:44:11.899 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:11.943 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:11.995 >     MPPTs AC power: a: 190 W b: 267 W
15:44:12.048 > [DPL inverter 114190549952]:
15:44:12.175 >     solar-powered, producing 87 W
15:44:12.215 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:12.257 >     sending commands enabled, reachable, eligible
15:44:12.300 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:12.346 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:12.399 >     MPPTs AC power: a: 44 W b: 43 W
15:44:12.479 > Fetch inverter: 116183300688
15:44:12.531 > Queue size - NRF: 1 CMT: 0
15:44:12.584 > [PowerMeterHttpJson] New total: 1776.21
15:44:12.687 > Middle missing
15:44:12.720 > Request retransmit: 3
15:44:12.755 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1776.2 W (valid)
15:44:12.793 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:12.832 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:12.875 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:12.904 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:12.946 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:12.998 > [DPL inverter 116183300688]:
15:44:13.060 >     solar-powered, producing 457 W
15:44:13.186 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:13.225 >     sending commands enabled, reachable, eligible
15:44:13.267 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:13.310 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:13.363 >     MPPTs AC power: a: 190 W b: 267 W
15:44:13.415 > [DPL inverter 114190549952]:
15:44:13.467 >     solar-powered, producing 87 W
15:44:13.512 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:13.553 >     sending commands enabled, reachable, eligible
15:44:13.598 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:13.660 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:13.723 >     MPPTs AC power: a: 44 W b: 43 W
15:44:13.780 > Middle missing
15:44:13.915 > Request retransmit: 3
15:44:13.968 > Middle missing
15:44:14.023 > Request retransmit: 3
15:44:14.076 > Success
15:44:14.209 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1776.2 W (valid)
15:44:14.258 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:14.297 > [DPL] inverter 114190549952 is behind power meter producing 87 W
15:44:14.341 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 544 W (diff 1756 W, hysteresis 10 W)
15:44:14.382 > [DPL] will cover 544 W using 2 solar-powered inverters
15:44:14.424 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1756 W AC
15:44:14.484 > [DPL inverter 116183300688]:
15:44:14.536 >     solar-powered, producing 457 W
15:44:14.583 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:14.626 >     sending commands enabled, reachable, eligible
15:44:14.665 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:14.708 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:14.741 >     MPPTs AC power: a: 190 W b: 267 W
15:44:14.796 > [DPL inverter 114190549952]:
15:44:14.840 >     solar-powered, producing 87 W
15:44:14.872 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:14.916 >     sending commands enabled, reachable, eligible
15:44:14.957 >     max reduction production/standby: 61/61 W, max increase: 0 W
15:44:15.007 >     target limit/output/state: -1 W (unchanged)/87 W/unchanged, 0 update timeouts
15:44:15.059 >     MPPTs AC power: a: 44 W b: 43 W
15:44:15.116 > Fetch inverter: 114190549952
15:44:15.172 > Queue size - NRF: 1 CMT: 0
15:44:15.249 > [PowerMeterHttpJson] New total: 1780.13
15:44:15.351 > Middle missing
15:44:15.407 > Request retransmit: 2
15:44:15.460 > Success
15:44:15.512 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1780.1 W (valid)
15:44:15.554 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:15.629 > [DPL] inverter 114190549952 is behind power meter producing 91 W
15:44:15.672 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 548 W (diff 1752 W, hysteresis 10 W)
15:44:15.716 > [DPL] will cover 548 W using 2 solar-powered inverters
15:44:15.758 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1752 W AC
15:44:15.811 > [DPL inverter 116183300688]:
15:44:15.865 >     solar-powered, producing 457 W
15:44:15.903 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:15.959 >     sending commands enabled, reachable, eligible
15:44:15.999 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:16.049 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:16.087 >     MPPTs AC power: a: 190 W b: 267 W
15:44:16.150 > [DPL inverter 114190549952]:
15:44:16.273 >     solar-powered, producing 91 W
15:44:16.359 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:16.413 >     sending commands enabled, reachable, eligible
15:44:16.456 >     max reduction production/standby: 65/65 W, max increase: 0 W
15:44:16.499 >     target limit/output/state: -1 W (unchanged)/91 W/unchanged, 0 update timeouts
15:44:16.551 >     MPPTs AC power: a: 46 W b: 45 W
15:44:16.592 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1780.1 W (valid)
15:44:16.634 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:16.679 > [DPL] inverter 114190549952 is behind power meter producing 91 W
15:44:16.718 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 548 W (diff 1752 W, hysteresis 10 W)
15:44:16.754 > [DPL] will cover 548 W using 2 solar-powered inverters
15:44:16.797 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1752 W AC
15:44:16.841 > [DPL inverter 116183300688]:
15:44:16.874 >     solar-powered, producing 457 W
15:44:16.914 >     lower/current/upper limit: 52/1500/1500 W, output capability: 1500 W
15:44:16.958 >     sending commands enabled, reachable, eligible
15:44:16.998 >     max reduction production/standby: 405/405 W, max increase: 0 W
15:44:17.038 >     target limit/output/state: -1 W (unchanged)/457 W/unchanged, 0 update timeouts
15:44:17.079 >     MPPTs AC power: a: 190 W b: 267 W
15:44:17.130 > [DPL inverter 114190549952]:
15:44:17.173 >     solar-powered, producing 91 W
15:44:17.199 >     lower/current/upper limit: 26/100/800 W, output capability: 800 W
15:44:17.243 >     sending commands enabled, reachable, eligible
15:44:17.286 >     max reduction production/standby: 65/65 W, max increase: 0 W
15:44:17.329 >     target limit/output/state: -1 W (unchanged)/91 W/unchanged, 0 update timeouts
15:44:17.383 >     MPPTs AC power: a: 46 W b: 45 W
15:44:17.444 > Fetch inverter: 116183300688
15:44:17.599 > Queue size - NRF: 1 CMT: 0
15:44:17.653 > [PowerMeterHttpJson] New total: 1776.35
15:44:17.699 > [DPL] the system is stable, the last power limit is still valid
15:44:17.763 > Middle missing
15:44:17.819 > Request retransmit: 2
15:44:17.871 > Success
15:44:17.914 > [DPL] targeting -100 W, base load is 250 W, power meter reads 1776.3 W (valid)
15:44:17.957 > [DPL] inverter 116183300688 is behind power meter producing 457 W
15:44:18.002 > [DPL] inverter 114190549952 is behind power meter producing 91 W
15:44:18.045 > [DPL] requesting 2300 W from 2 solar-powered inverters currently producing 548 W (diff 1752 W, hysteresis 10 W)
15:44:18.088 > [DPL] will cover 548 W using 2 solar-powered inverters
15:44:18.143 > [DPL] battery allowance is 0/0 W DC/AC, solar power is 0/0 W DC/AC, requested are 1752 W AC
15:44:18.192 > [DPL inverter 116183300688]:

[AndreasBoehm]

Mit Version 2025.01.10 hatten wir andere Probleme, das Limit war massiv am Schwingen, weil wir versucht haben die WRs aus dem Leistungsloch zu holen, das hat aber nicht gut funktioniert. Also von einer perfekten Regelung kann man hier auf keinen Fall sprechen. Ein Problem "gelöst" und dadurch ein neues, noch schlimmeres produziert.

Mit der Zeitabgleich Thematik habe ich mich noch gar nicht beschäftigt, verstehe auch nicht warum sich alle drüber beschweren. Schaut ihr alle in die Logs und könnt nicht schlafen wenn irgendwas drin steht auch wenn alles funktioniert?

[Keule31]

Ich sehe im Web eine 15 stehen in der Ereignisanzeige und dann muß ich mir das anschauen (Monk) :-)

[schlimmchen]

Wir (oder jedenfalls ich) streite(n) nicht ab, dass es mit jüngeren Versionen mehr von diesen Zeitabgleichen gibt. Solange das aber nicht mit unerwarteten Neustarts der OpenDTU-OnBattery zusammenhängt (was bei nur wenigen der Fall zu sein scheint), ist das ein kosmetisches Problem. Noch dazu eins, das im Upstream gelöst werden sollte. Da verlassen wir uns auf Mitarbeitenden dort bzw. auf Thomas, dass sie/er sowas lösen/löst, weil es nichts speziell mit unserem Fork der Software zu tun hat.

[Keule31]

Hallo zusammen,

DPL friert nicht mehr ein, das wurde mit der aktuellen Version behoben, aber der ständige Zeitabgleich besteht weiterhin bei mir.
Es beeinträchtig nicht die Funktion aber es verfälscht die Anzeige "Ereignisanzeige" in sofern, das man vor lauter Einträge von Zeitabgleich nicht mehr darauf achtet, wenn mal ein richtiges Problem wie z.B. Überspannung usw. eingetragen wird und es einfach ignoriert da man ja davon ausgeht, ist sowieso nur der Zeitabgleich.....

@thomas
kannst du das eventuell noch mal überarbeiten?

Vielen Dank und beste Grüße
Keule

[tg1958]

Hallo, sorry, bin neu in "duscussions". Verzeiht mir also bitte evt. Fehler.
Gleiches Problem, v2025.02.10, 2 Wechselrichter. DPL. Vielleicht hilft meine zusätzlichen Beobachtung: Bei "Zeige/Setze Wechselrichterlimit" steht bei einem Wechselrichter "Letzte Übertragung: Ausstehend"; Nach einem manuellen Neustart der DTU ist wieder alles in Ordung und läuft bis zum nächsten Hänger. LG Peter

[gitisgreat2023]

Reset bitte mal jetzt tagsüber deine "radio statistics" und poste mal nach eine Stunde die Werte. Welcher WR? (Frequenz, Sendeleistung dBm bitte auch noch)

[tg1958]

2 DTU's, Messung via Shelly EM3 DTU1: HM700+HM300 Solar, DTU2: HM400 Batterie, Sendeleistung Hoch(-6dBm), Empfang -80dBm
Funkstatistik dzt (ca. 2 Std): 465 bzw 441 gesendet, Empfang 100%, keine Fehler. War vor der Umstellung anders. Da waren nur ca. 30% "fehlerfrei" und ca. 50 -70% "nicht empfangen"

Umgestellt habe ich jetzt die Hysterese vom10W auf 30W, da ich gesehen habe, dass die Ausfälle vor allem bei einem starken negativen Lastwechsel auftreten. Vermute mal, dass der WR mit mehrmaligen kurz hintereinander negativen Leistungsregelungen nicht mehr mitkommt und blockiert. Eine deutliche Verbesserung.
Eventuell sind längere Intervalle bei der Regelung (vermutlich auch Wechselrichter-abhängig) hilfreich????

[Keule31]

Sendeleistung -6dB könnte zu hoch sein, verursacht möglicherweise Fehler in der Übertragung, stell mal auf -18dB und überprüfe die Fehlerquote.

[schlimmchen]

und überprüfe die Fehlerquote.

Er/Sie hat doch aber eine tolle Quote jetzt?! Also bitte nichts anfassen, wenn das gut läuft...

Eventuell sind längere Intervalle bei der Regelung (vermutlich auch Wechselrichter-abhängig) hilfreich????

Meh... Also ich sehe weder bei mir noch in Diskussionen einen Hinweis darauf, dass das wichtig wäre. Wenn das mehr Leute berichten, sollte man da mal hinschauen.

[tg1958]

Ich muss meine Aussage bzg Fehlerquote vor der Umstellung korrigieren. Sorry. Habe erst jetzt mitbekommen, dass "Nicht empfangen"-Werte nur dann gültig sind, wenn der WR arbeitet. Sind jetzt aber weiterhin bei aktivem WR bei 99% "empfangen". Aktuell -12dBM. Und ja. "Dont touch"

[The-Holgi]

Hallo,
habe bei mir das Gleiche Verhalten beobachtet. Muß dazu sagen, das das erste Mal die …on Battery Version in Betrieb habe. Es sind bei mir 4 Hoymiles HM Wechselrichter „angeschlossen“ (2 x HM400, HM600 und HM800. Habe nun nachdem ich das minimale Leistungslimit auf 25% der einzelnen Wechselrichter gestellt habe bis jetzt nach einem Tag keine Probleme mehr. Das mit Problem mit dem Zeitabgleich besteht jedoch weiter.
Werde noch testen ob ich mit dem Limit noch ohne Probleme zu haben auf 15% runter kann.

[The-Holgi]

Ich werde berichten, ob es mit den 15% auch noch funktioniert. Im Moment habe ich den 600er und einen 400er im DPL. Es scheint aber keinen Unterschied zu machen ob alle 4 Wechselrichter geregelt werden oder nur 2. Stelle dann auf 90W und 60W.

[The-Holgi]

Hallo, seit 2 Tagen habe ich nun das minimale Leistungslimit auf 15% der Max. Leistung gestellt.
Funktioniert bis jetzt auch ohne Probleme.

[AndreasBoehm]

Ich hab mal einen separaten issue für diese Problematik angelegt: #1675

[johny3636]

Hallo,
ich habe auch das problem das meimHMS-1600 immer einfriert. an manchen Tagen geht alles normal und dann wieder regelt er nicht hoch. Ich habe mal alles durchprobiert. Festgestellt habe ich wenn ich das limit selber raufsetze reagiert der HMS sofort. Es wird dann von der DTU runtergeregelt. Aber es geht nur runter. wieder rauf geht nicht. Und er pendelt sicht fast immer so bei 13.4% ein und bleibt da.
Bei mehr verbrauch schaltet sich dann mein HMS-600 vom Akku ein (auch auf 100% wenn nötig)aber der HMS-1600 bleibt stur auf 13%.
Es spielt dabei auch keine rolle auf welchen wert ich den Mindeslast eintrage.
Hat vielleicht jemand schon was erreicht?
MFG Johny

[AndreasBoehm]

@johny3636 Hier gehts um dein Problem: #1675

[Harisjems]

Workaround ist bei mir 20 % beim HMS1600 und HM1500 17 % Min. Dauerlösung ist es zwar nicht, aber besser Verschenken, als Einkaufen von RWE.