Victron Network: SmartShunt Data

[Farquarl]

Hi,
i wanted to know if the smart shunt is connected in the VE Network, will the data be displayed/conwayed to the DTU?
I have two Victron MPPT one is smart, one is not. I want to connect them to my fusion board but i will need VE direct port for the MPPT. The Smart Shunt and one of the MPPT are in a network. Will the Shunt data be available for the DTU over the network function?
I hope that was understandable. Thanks in advance.

[Farquarl]

Okay, it looks like only the battery voltage and current are shared over VE Network. So it is not possible. I will look into a solution with an ESp32 to push the Ve direct values as MQTT.

[SW-Niko]

I have a similar configuration with 2 MPPTs and 1 Smart Shunt. I connected all three devices to a Fusion board via VE.Direct cables. However, I built my own adapter board with three ADuM1201. This allows me to use the Fusion board with three VE.Direct connections.

[Farquarl]

Interesting, do you still have the gerber files? Else I just make my own.

[SW-Niko]

No, sorry, I used a simple Stripboard.
If you make your own.. don't forget to add capacitors on both sides of the ADuM.