ChangeLogP570.txt

2019-02-17  Vince Weaver <vincent.weaver@maine.edu>

	* src/ctests/attach_cpu_sys_validate.c,
	  src/ctests/attach_cpu_validate.c: ctests: attach_cpu_*validate: fix
	  buffer overrun  embarassing bug, on systems with more than 16 cores
	  was running off the end of a buffer.  Oddly this did not fail on my
	  debian system with 32 cores.

2019-02-15  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/validation_tests/papi_tot_cyc.c: Added a 'priming' call of the
	  naive matrix multiply, before counting the cycles on the second
	  call. This is to overcome any first-time system overhead in the
	  procedure, like loading the program, so the cycles will better
	  match the 3rd and 4th calls. This corrects an error (and failure of
	  the test) in which the first call to the routine takes over 10%
	  more cycles to complete than the subsequent calls.
	* src/testlib/test_utils.c: Added new message to test_fail, so users
	  will not think a test failure means their PAPI install is unusable,
	  or that the failure should be reported to the PAPI development
	  team.
	* src/run_tests_exclude.txt: Added new memleak_check.c in
	  validation_tests; it is not a standalone test, but a utility to be
	  run by valgrind when checking for memory leaks.
	* release_procedure.txt: Release guidance improved with more details
	  on testing.

2019-02-11  Frank Winkler <frankbook@m016.zih.tu-dresden.de>

	* src/ctests/zero.c, src/validation_tests/cycles_validation.c: Fixed
	  warnings detected by clang. Replaced abs with llabs.
	* src/components/coretemp_freebsd/coretemp_freebsd.c: Fixed unused
	  warnings.

2019-02-08  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/perf_event/pe_libpfm4_events.c: revert change that
	  repaired a memory leak; it caused a problem with ARM systems, per
	  Vince Weaver.

2019-02-08  Vince Weaver <vincent.weaver@maine.edu>

	* src/linux-common.c: arm64: update the ARM family configuration to
	  work with newer Linux kernels.  As of Linux-3.19 the "CPU
	  architecture" field in /proc/cpuinfo changed from "AArch64" to "8".
	  Update the code so it properly falls back in this situation.
	  Reported-by: Al Grant <algrant109@gmail.com>

2019-02-08  Frank Winkler <frankbook@m016.zih.tu-dresden.de>

	* src/components/nvml/tests/Makefile: Fixed linking error.
	* src/components/nvml/linux-nvml.c: Fixed "this statement may fall
	  through" warning.
	* src/components/pcp/tests/testPCP.c: Fixed sprintf warnings by
	  replacing them with the safer method snprintf.
	* src/components/coretemp/linux-coretemp.c: Fixed warning: '%s'
	  directive output may be truncated.  Newer versions of gcc are more
	  strict with regards to return values of snprintf(), so check the
	  values.

2019-02-07  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/papi_internal.c: After PAPI_shutdown free(_papi_native_events);
	  must reset variables and counts to ensure next PAPI_library_init()
	  from same code will realloc() and rebuild the table.
	* src/libpfm4/Makefile, src/libpfm4/config.mk,
	  src/libpfm4/examples/Makefile, src/libpfm4/lib/pfmlib_perf_event.c,
	  src/libpfm4/perf_examples/Makefile: improve top makefile by
	  separating targets  This patch improves the Makefile structure by,
	  at the top level, separating the various targets: all, install-lib,
	  install-examples.  The patch keeps install_examples as a backward
	  compatible target. The patch also makes it possible to override
	  PREFIX from cmdline.

2019-02-06  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/validation_tests/Makefile.recipies,
	  src/validation_tests/memleak_check.c: memleak_check is a new simple
	  test file to help expose memory leaks in PAPI main and components.
	* src/papi_internal.c, src/papi_preset.c: Patches provided by Jiali
	  Li. Added cleanup code to prevent memory leaks.
	* src/libpfm4/lib/pfmlib_perf_event.c: Patches provided by Jiali Li.
	  Added cleanup code to prevent memory leaks.
	* src/components/stealtime/linux-stealtime.c: Patches provided by
	  Jiali Li. Added cleanup code to prevent memory leaks.
	* src/components/powercap/linux-powercap.c: Added cleanup code to
	  prevent some of the memory leaks. Dynamic-library related calls
	  leak, but we cannot prevent all of those leaks.
	* src/components/perf_event_uncore/perf_event_uncore.c: Patches
	  provided by Jiali Li. Added cleanup code to prevent memory leaks.
	* src/components/perf_event/pe_libpfm4_events.c: Patches provided by
	  Jiali Li. Added cleanup code to prevent memory leaks.
	* src/components/nvml/linux-nvml.c: Added cleanup code to prevent
	  some of the memory leaks. Dynamic-library related calls leak, but
	  we cannot prevent all of those leaks.
	* src/components/lustre/linux-lustre.c: Added cleanup code to prevent
	  memory leaks.
	* src/components/lmsensors/linux-lmsensors.c: Added cleanup code to
	  prevent some of the memory leaks. Dynamic-library related calls
	  leak, but we cannot prevent all of those leaks.
	* src/components/infiniband_umad/linux-infiniband_umad.c: Added
	  cleanup code to prevent some of the memory leaks. Dynamic-library
	  related calls leak, but we cannot prevent all of those leaks.

2019-02-06  Heike Jagode <jagode@icl.utk.edu>

	* src/components/cuda/tests/cudaTest_cupti_only.cu,
	  src/components/cuda/tests/likeComp_cupti_only.cu,
	  src/components/cuda/tests/simpleMultiGPU.cu,
	  src/components/cuda/tests/simpleMultiGPU.h,
	  src/components/cuda/tests/timer.h: Added more details to the
	  license statement for cuda tests.

2019-02-05  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/nvml/README: Expanded description of NVML component
	  and usage.
	* src/components/README: Expanded notes to guide releases.

2019-02-01  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/infiniband_umad/linux-infiniband_umad.c: Corrected
	  name of component to distinguish this one from the 'infiniband'
	  component.
	* src/components/nvml/README, src/components/nvml/linux-nvml.c: Had a
	  problem with undefined variables; added notes to README.

2019-02-01  Frank Winkler <frankbook@m016.zih.tu-dresden.de>

	* src/components/perf_event/perf_event.c: Suppress "unused" warnings.
	* src/components/perf_event/perf_event.c: Get rid of "use of
	  uninitialized variable" warnings.
	* src/components/infiniband_umad/README,
	  src/components/lmsensors/README: Added component instructions.
	* src/components/cuda/Rules.cuda: Commented out target "native_clean"
	  since it is used twice.
	* src/components/lmsensors/README: Added build instructions for
	  component lmsensors.
	* src/components/lmsensors/linux-lmsensors.c: Suppress "unused
	  variables" warnings.

2019-01-31  Anthony Castaldo <tonycastaldo@harry.icl.utk.edu>

	* man/man1/PAPI_derived_event_files.1, man/man1/papi_avail.1,
	  man/man1/papi_clockres.1, man/man1/papi_command_line.1,
	  man/man1/papi_component_avail.1, man/man1/papi_cost.1,
	  man/man1/papi_decode.1, man/man1/papi_error_codes.1,
	  man/man1/papi_event_chooser.1, man/man1/papi_hybrid_native_avail.1,
	  man/man1/papi_mem_info.1, man/man1/papi_multiplex_cost.1,
	  man/man1/papi_native_avail.1, man/man1/papi_version.1,
	  man/man1/papi_xml_event_info.1, man/man3/PAPIF_accum.3,
	  man/man3/PAPIF_accum_counters.3, man/man3/PAPIF_add_event.3,
	  man/man3/PAPIF_add_events.3, man/man3/PAPIF_add_named_event.3,
	  man/man3/PAPIF_assign_eventset_component.3,
	  man/man3/PAPIF_cleanup_eventset.3,
	  man/man3/PAPIF_create_eventset.3,
	  man/man3/PAPIF_destroy_eventset.3, man/man3/PAPIF_enum_event.3,
	  man/man3/PAPIF_epc.3, man/man3/PAPIF_event_code_to_name.3,
	  man/man3/PAPIF_event_name_to_code.3, man/man3/PAPIF_flips.3,
	  man/man3/PAPIF_flops.3, man/man3/PAPIF_get_clockrate.3,
	  man/man3/PAPIF_get_dmem_info.3, man/man3/PAPIF_get_domain.3,
	  man/man3/PAPIF_get_event_info.3, man/man3/PAPIF_get_exe_info.3,
	  man/man3/PAPIF_get_granularity.3,
	  man/man3/PAPIF_get_hardware_info.3, man/man3/PAPIF_get_multiplex.3,
	  man/man3/PAPIF_get_preload.3, man/man3/PAPIF_get_real_cyc.3,
	  man/man3/PAPIF_get_real_nsec.3, man/man3/PAPIF_get_real_usec.3,
	  man/man3/PAPIF_get_virt_cyc.3, man/man3/PAPIF_get_virt_usec.3,
	  man/man3/PAPIF_ipc.3, man/man3/PAPIF_is_initialized.3,
	  man/man3/PAPIF_library_init.3, man/man3/PAPIF_lock.3,
	  man/man3/PAPIF_multiplex_init.3, man/man3/PAPIF_num_cmp_hwctrs.3,
	  man/man3/PAPIF_num_counters.3, man/man3/PAPIF_num_events.3,
	  man/man3/PAPIF_num_hwctrs.3, man/man3/PAPIF_perror.3,
	  man/man3/PAPIF_query_event.3, man/man3/PAPIF_query_named_event.3,
	  man/man3/PAPIF_read.3, man/man3/PAPIF_read_ts.3,
	  man/man3/PAPIF_register_thread.3, man/man3/PAPIF_remove_event.3,
	  man/man3/PAPIF_remove_events.3,
	  man/man3/PAPIF_remove_named_event.3, man/man3/PAPIF_reset.3,
	  man/man3/PAPIF_set_cmp_domain.3,
	  man/man3/PAPIF_set_cmp_granularity.3, man/man3/PAPIF_set_debug.3,
	  man/man3/PAPIF_set_domain.3, man/man3/PAPIF_set_event_domain.3,
	  man/man3/PAPIF_set_granularity.3, man/man3/PAPIF_set_inherit.3,
	  man/man3/PAPIF_set_multiplex.3, man/man3/PAPIF_shutdown.3,
	  man/man3/PAPIF_start.3, man/man3/PAPIF_start_counters.3,
	  man/man3/PAPIF_state.3, man/man3/PAPIF_stop.3,
	  man/man3/PAPIF_stop_counters.3, man/man3/PAPIF_thread_id.3,
	  man/man3/PAPIF_thread_init.3, man/man3/PAPIF_unlock.3,
	  man/man3/PAPIF_unregister_thread.3, man/man3/PAPIF_write.3,
	  man/man3/PAPI_accum.3, man/man3/PAPI_accum_counters.3,
	  man/man3/PAPI_add_event.3, man/man3/PAPI_add_events.3,
	  man/man3/PAPI_add_named_event.3,
	  man/man3/PAPI_addr_range_option_t.3, man/man3/PAPI_address_map_t.3,
	  man/man3/PAPI_all_thr_spec_t.3,
	  man/man3/PAPI_assign_eventset_component.3, man/man3/PAPI_attach.3,
	  man/man3/PAPI_attach_option_t.3, man/man3/PAPI_cleanup_eventset.3,
	  man/man3/PAPI_component_info_t.3, man/man3/PAPI_cpu_option_t.3,
	  man/man3/PAPI_create_eventset.3, man/man3/PAPI_debug_option_t.3,
	  man/man3/PAPI_destroy_eventset.3, man/man3/PAPI_detach.3,
	  man/man3/PAPI_disable_component.3,
	  man/man3/PAPI_disable_component_by_name.3,
	  man/man3/PAPI_dmem_info_t.3, man/man3/PAPI_domain_option_t.3,
	  man/man3/PAPI_enum_cmp_event.3, man/man3/PAPI_enum_event.3,
	  man/man3/PAPI_epc.3, man/man3/PAPI_event_code_to_name.3,
	  man/man3/PAPI_event_info_t.3, man/man3/PAPI_event_name_to_code.3,
	  man/man3/PAPI_exe_info_t.3, man/man3/PAPI_flips.3,
	  man/man3/PAPI_flops.3, man/man3/PAPI_get_cmp_opt.3,
	  man/man3/PAPI_get_component_index.3,
	  man/man3/PAPI_get_component_info.3, man/man3/PAPI_get_dmem_info.3,
	  man/man3/PAPI_get_event_component.3,
	  man/man3/PAPI_get_event_info.3,
	  man/man3/PAPI_get_eventset_component.3,
	  man/man3/PAPI_get_executable_info.3,
	  man/man3/PAPI_get_hardware_info.3, man/man3/PAPI_get_multiplex.3,
	  man/man3/PAPI_get_opt.3, man/man3/PAPI_get_overflow_event_index.3,
	  man/man3/PAPI_get_real_cyc.3, man/man3/PAPI_get_real_nsec.3,
	  man/man3/PAPI_get_real_usec.3, man/man3/PAPI_get_shared_lib_info.3,
	  man/man3/PAPI_get_thr_specific.3, man/man3/PAPI_get_virt_cyc.3,
	  man/man3/PAPI_get_virt_nsec.3, man/man3/PAPI_get_virt_usec.3,
	  man/man3/PAPI_granularity_option_t.3, man/man3/PAPI_hw_info_t.3,
	  man/man3/PAPI_inherit_option_t.3, man/man3/PAPI_ipc.3,
	  man/man3/PAPI_is_initialized.3, man/man3/PAPI_itimer_option_t.3,
	  man/man3/PAPI_library_init.3, man/man3/PAPI_list_events.3,
	  man/man3/PAPI_list_threads.3, man/man3/PAPI_lock.3,
	  man/man3/PAPI_mh_cache_info_t.3, man/man3/PAPI_mh_info_t.3,
	  man/man3/PAPI_mh_level_t.3, man/man3/PAPI_mh_tlb_info_t.3,
	  man/man3/PAPI_mpx_info_t.3, man/man3/PAPI_multiplex_init.3,
	  man/man3/PAPI_multiplex_option_t.3, man/man3/PAPI_num_cmp_hwctrs.3,
	  man/man3/PAPI_num_components.3, man/man3/PAPI_num_counters.3,
	  man/man3/PAPI_num_events.3, man/man3/PAPI_num_hwctrs.3,
	  man/man3/PAPI_option_t.3, man/man3/PAPI_overflow.3,
	  man/man3/PAPI_perror.3, man/man3/PAPI_preload_info_t.3,
	  man/man3/PAPI_profil.3, man/man3/PAPI_query_event.3,
	  man/man3/PAPI_query_named_event.3, man/man3/PAPI_read.3,
	  man/man3/PAPI_read_counters.3, man/man3/PAPI_read_ts.3,
	  man/man3/PAPI_register_thread.3, man/man3/PAPI_remove_event.3,
	  man/man3/PAPI_remove_events.3, man/man3/PAPI_remove_named_event.3,
	  man/man3/PAPI_reset.3, man/man3/PAPI_set_cmp_domain.3,
	  man/man3/PAPI_set_cmp_granularity.3, man/man3/PAPI_set_debug.3,
	  man/man3/PAPI_set_domain.3, man/man3/PAPI_set_granularity.3,
	  man/man3/PAPI_set_multiplex.3, man/man3/PAPI_set_opt.3,
	  man/man3/PAPI_set_thr_specific.3, man/man3/PAPI_shlib_info_t.3,
	  man/man3/PAPI_shutdown.3, man/man3/PAPI_sprofil.3,
	  man/man3/PAPI_sprofil_t.3, man/man3/PAPI_start.3,
	  man/man3/PAPI_start_counters.3, man/man3/PAPI_state.3,
	  man/man3/PAPI_stop.3, man/man3/PAPI_stop_counters.3,
	  man/man3/PAPI_strerror.3, man/man3/PAPI_thread_id.3,
	  man/man3/PAPI_thread_init.3, man/man3/PAPI_unlock.3,
	  man/man3/PAPI_unregister_thread.3, man/man3/PAPI_write.3,
	  release_procedure.txt: New Doc Files in preparatoin for release
	  5.7.0.0.

2019-01-30  Anthony Castaldo <tonycastaldo@harry.icl.utk.edu>

	* src/configure: For new version 5.7.0.0
	* doc/Doxyfile-common, src/Makefile.in, src/configure.in, src/papi.h:
	  Changing version number to 5.7.0.0.

2019-01-30  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/cuda/tests/LDLIB.src: Corrected a path name.

2019-01-30  William Cohen <wcohen@redhat.com>

	* src/run_tests.sh: Elimininating some of the SHELLCHECK_WARNINGS.
	  Removing unused variables. Correcting printf arguments.

2019-01-29  Konstantin Stefanov <cstef@parallel.ru>

	* src/components/nvml/linux-nvml.c: Change method for detecting
	  available NVML component events  Previously PAPI nvml component
	  used ROM version for detecting the type of the GPU and find which
	  events are supported. On some newer cards, e.g. Tesla Kepler and
	  Tesla Pascal, this gives wrong result. Those card support GPU and
	  memory utilization, for example, but it was not detected as Kepler
	  card may not have powerROM, and PAPI nvml considers it as an old
	  card.  So I changed the way the event availability is detected:
	  just try to obtain the info, and if it succeds, it is available.

2019-01-28  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/nvml/linux-nvml.c: Added (void)s to eliminate
	  warnings about unused variables.
	* src/components/cuda/linux-cuda.c: Corrected field-name typo in a
	  SUBDBG message that was not previously being compiled.
	* src/components/cuda/README, src/components/cuda/tests/LDLIB.src:
	  Changes about accessing to cupti libs and includes.
	* src/components/cuda/tests/simpleMultiGPU.cu,
	  src/components/nvml/tests/HelloWorld.cu: Corrected compile warnings
	  for deprecated routines or compiler complaints.

2019-01-23  Vince Weaver <vincent.weaver@maine.edu>

	* src/papi_events.csv: papi_events: the skylake events are actually
	  split in two, make sure cascadelake gets both cases too

2019-01-23  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/nvml/tests/nvml_power_limiting_test.cu: structure
	  member name was misspelt; 'cmpinfo->disabled_resaon' instead of
	  'cmpinfo->disabled_reason'.
	* src/components/infiniband_umad/tests/infiniband_umad_list_events.c:
	  Code was missing the 'string.h' include necessary for use of
	  'strstr() function'.
	* src/components/infiniband_umad/linux-infiniband_umad.c: Header file
	  changed; fixed prototypes for umad_get_ca() to use 'const char*'
	  instead of 'char*'.

2019-01-22  Vince Weaver <vincent.weaver@maine.edu>

	* src/papi_events.csv: papi_events: add cascade lake X support

2019-01-22  Anthony Castaldo <TonyCastaldo@icl.utk.edu>

	* src/components/cuda/linux-cuda.c,
	  src/components/cuda/tests/cudaTest_cupti_only.cu,
	  src/libpfm4/lib/pfmlib_amd64.c, src/libpfm4/lib/pfmlib_intel_x86.c,
	  src/libpfm4/lib/pfmlib_intel_x86_arch.c: linux-cuda.c and
	  cudaTest_cupti_only.cu have cosmetic changes. the pfmlib changes
	  were committed by Stephane to simplify cpuid; The push/pop were
	  causing problems with some compiler optimizations.

2019-01-16  Anthony Castaldo <TonyCastaldo@icl.utk.edu>

	* src/libpfm4/README, src/libpfm4/include/perfmon/pfmlib.h,
	  src/libpfm4/lib/events/amd64_events_fam17h.h,
	  src/libpfm4/lib/events/intel_skl_events.h,
	  src/libpfm4/lib/pfmlib_common.c,
	  src/libpfm4/lib/pfmlib_intel_skl.c,
	  src/libpfm4/lib/pfmlib_intel_x86.c,
	  src/libpfm4/lib/pfmlib_intel_x86_priv.h,
	  src/libpfm4/lib/pfmlib_priv.h, src/libpfm4/tests/validate_x86.c:
	  Three patches to libpfm4. (1) Add Intel CascadeLake X core PMU
	  support. (2) Add get_num_events() support for Intel X86 (3) Check
	  PMU models when validating event codes.
	* src/components/cuda/tests/runSMG.sh: Example file to run
	  simpleMultiGPU.
	* src/components/cuda/tests/runCTCO.sh: Example file for running
	  cudaTest_cupti_only
	* src/components/cuda/tests/runBW.sh: Example script to run
	  nvlink_bandwidth on PEAK.
	* src/components/cuda/tests/runAll.sh: Example script to run
	  nvlink_all on PEAK.
	* src/components/cuda/tests/simpleMultiGPU.cu: This is a PAPI version
	  of an NVIDIA cupti-only sample program; it is a useful starting
	  point to test a variety of metrics or events, which are specified
	  in a simple internal table.
	* src/components/cuda/tests/likeComp_cupti_only.cu: This program
	  (likeComp = likeComponent) tested if the events in a metric could
	  be harvested and put into an event group, read and re-ordered to
	  provide data to cuptiMetricGetValue. They can; we did this before
	  rewriting the component to do all Metrics in this way.
	* src/components/cuda/tests/nvlink_bandwidth.cu: This is a tester for
	  just 4 NVLINK bandwidth metrics. It moves data from CPU (host) to
	  GPU, or GPU to GPU. Reporting of intermediate steps has been
	  increased, and we retrieve the number of Async engines dynamically
	  to optimize the number of streams used in the copies. It was
	  previously hard-coded.
	* src/components/cuda/tests/nvlink_all.cu: This utility will iterate
	  through all the available NVLINK metrics in the PAPI system, and
	  run a test program for each of them, and report the results to
	  stdout. The test program is memory movement, a command line
	  argument can test CPU(host) to GPU memory movement, or GPU to GPU
	  movement amongst available GPU devices.  The report consists of all
	  single events, followed by a list of all possible pairs of events
	  on one GPU, and multiple GPUS. This report notes which nvlink
	  events are incompatible pairs, and will also report if any metrics
	  in pairs produce significantly different measurements than when
	  they are read singly. All of this is done with PAPI.
	* src/components/cuda/tests/cudaTest_cupti_only.cu: This program will
	  test a single performance metric or event that is provided on the
	  command line, on one or more GPUs. Only cupti is used. The exercise
	  will include both extensive memory moves NOT executed by kernel,
	  and a kernel. Options allow the user to skip the kernel execution
	  if desired, and to optionally use cuInit() and reset the devices
	  before beginning the test. Reports of the steps in the process are
	  output to stdout. The purpose of this program is to show what a
	  cupti-only result looks like, in order to see if issues with an
	  event are in the PAPI implementation only, or also exist in a
	  cupti-only implementation.
	* src/components/cuda/tests/Makefile: Several targets were added for
	  new test and utility programs.
	* src/components/cuda/linux-cuda.c: Several changes were made to more
	  efficiently (and correctly) read and compute metrics, including the
	  newly added nvlink metrics. The previous method was not reading
	  groups properly; and though this did not cause an error, it could
	  result in zeros being read instead of actual values. The change is
	  to break down all metrics and events for a device into global event
	  list (without duplicates) and build a single event group set for
	  everything the user has added. We repeat this each time the user
	  adds an event; on the assumption that this overhead is less likely
	  to occur during a performance critical time than when the user
	  reads the event set. After reading all the resultant groups we then
	  re-order the events and values to compute each metric, then store
	  those values (and any other event values) back into the user-
	  provided order.  Outstanding Issues: We do not provide to the user
	  the cuda metric 'branch_efficiency', there is an issue with the
	  library code sometimes segfaulting while reading the events for
	  particular metric. The bug has been reported to nvidia as bug ID
	  2485834.

2019-01-10  Vince Weaver <vincent.weaver@maine.edu>

	* src/ctests/Makefile.recipies, src/ctests/attach_cpu_sys_validate.c:
	  ctests: add an attach_cpu_sys test  this test for the Linux bug
	  where you attach to a process with SYS granularity
	* src/components/perf_event/perf_event.c,
	  src/components/perf_event/perf_event_lib.h,
	  src/ctests/attach_cpu_validate.c: perf_event: fix granularity
	  setting for attached processes  the old code was setting the
	  granularity wrong when attaching to a CPU.
	* src/components/perf_event/perf_event.c: perf_event: properly fall
	  back to read() if rdpmc read attempt fails  The code wasn't
	  properly handling this.  We now fall back to read() if *any* rdpmc
	  call in an eventset fails. In theory it is possible to only fall
	  back in a per-event fashion but that would make the code a lot more
	  complex.
	* src/components/perf_event/perf_helpers.h: perf_event: internally
	  indicate we need fallback when rdpmc not available

2018-12-07  Vince Weaver <vincent.weaver@maine.edu>

	* src/ctests/attach_cpu_validate.c: ctests: attach_cpu_validate: fail
	  test if all values are close to the same
	* src/ctests/Makefile.recipies, src/ctests/attach_cpu_validate.c:
	  ctests: add attach_cpu_validate test

2018-12-03  Vince Weaver <vincent.weaver@maine.edu>

	* src/ctests/branches.c: ctests/branches: remove code to set "sleep
	  time" which is no longer used
	* src/ctests/branches.c: ctests/branches: make the failure message
	  more verbose  to see what was going wrong.  the issue I was seeing
	  on Haswell was because there was some perf-related system load
	  happening on the same machine (the perf_fuzzer)
	* src/ctests/branches.c: ctests: branches, update code comments to
	  explain what test is doing  trying to figure out why sometimes
	  failing on Haswell system

2018-11-20  Anthony Castaldo <TonyCastaldo@icl.utk.edu>

	* src/components/cuda/linux-cuda.c,
	  src/components/cuda/tests/Makefile,
	  src/components/cuda/tests/nvlink_bandwidth.cu,
	  .../cuda/tests/nvlink_bandwidth_cupti_only.cu,
	  src/components/cuda/tests/runBW.sh,
	  src/components/cuda/tests/runCO.sh,
	  src/components/cuda/tests/simpleMultiGPU.cu: Several files modified
	  to properly utilize the NVLINK metrics added to the linux-cuda.c
	  component. Commenting improved to aid my own understanding of the
	  existing code.  Tony C.

2018-11-20  Terry Cojean <terry.cojean@kit.edu>

	* src/components/cuda/README, src/components/nvml/README,
	  .../nvml/tests/nvml_power_limiting_test.cu,
	  src/components/powercap/README,
	  src/components/powercap/tests/powercap_limit.c: Improved error
	  handling. Fixed typos. Added details to component README files.

2018-11-05  Anara Kozhokanova <akozhoka@vols.utk.edu>

	* src/components/powercap/utils/powercap_plot.c: Revert "Temporary
	  Fix: The powercap component does not properly"  This reverts commit
	  bde6c257e4af47e9267ebb194b0aa4697568e99f.  The issue with incorrect
	  values reported by powercap component was fixed in ea8fa1f.
	  Therefore, this temporary fix is no longer needed.
	* src/components/powercap/linux-powercap.c: Fix the bug in powercap
	  component introduced in 2231b36. The reported values by powercap
	  component were not correct (read values were not subtracted from
	  start values and without wraparound).

2018-11-04  Frank Winkler <frankbook@franks-air.localdomain>

	* src/components/perf_event/perf_event.c: Fixed a bug that occurred
	  when compiling with debug flag. - papi_pe_buffer was undeclared

2018-10-26  Anthony Castaldo <TonyCastaldo@icl.utk.edu>

	* src/components/cuda/linux-cuda.c,
	  src/components/cuda/tests/Makefile,
	  src/components/cuda/tests/nvlink_all.cu,
	  src/components/cuda/tests/nvlink_bandwidth.cu,
	  .../cuda/tests/nvlink_bandwidth_cupti_only.cu,
	  src/components/cuda/tests/runAll.sh,
	  src/components/cuda/tests/runBW.sh,
	  src/components/cuda/tests/runCO.sh: repairs, new features, run
	  files, a new utility in nvlink_all.

2018-10-10  Anthony Castaldo <TonyCastaldo@icl.utk.edu>

	* src/components/cuda/linux-cuda.c,
	  src/components/cuda/tests/LDLIB.src,
	  src/components/cuda/tests/Makefile,
	  src/components/cuda/tests/nvlink_all.cu,
	  src/components/cuda/tests/nvlink_bandwidth.cu,
	  .../cuda/tests/nvlink_bandwidth_cupti_only.cu,
	  src/components/cuda/tests/runAll.sh,
	  src/components/cuda/tests/runBW.sh,
	  src/components/nvml/PeakConfigure.sh: Added several files, and
	  rewrote the tests. I created a new test, nvlink_all.cu, with a new
	  approach to test all nvlink events present in the component
	  standalone, and I rewrote the original nvlink_bandwidth.cu to make
	  it work properly with PAPI. I also added some testing scripts
	  needed to function on the PEAK supercomputer; where this code was
	  tested.

2018-10-03  Anara Kozhokanova <akozhoka@vols.utk.edu>

	* src/utils/papi_avail.c: Add a note to the output of "papi_avail -e
	  <preset_event>" if preset event is not available at the host
	  architecture.

2018-09-28  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/cuda/tests/Makefile,
	  src/components/cuda/tests/nvlink_bandwidth.cu,
	  src/components/cuda/tests/simpleMultiGPU.cu,
	  src/components/nvml/tests/Makefile,
	  src/components/nvml/tests/nvmlcap_plot.cu: New and debugged files
	  for NVML and CUDA testing.

2018-09-28  Vince Weaver <vince@deater.net>

	* src/components/perf_event/perf_event.c: perf_event: remove debug
	  printf from libpfm4 error handling code  Steve Kaufmann reported
	  this triggered sometimes and was unnecessary
	* src/utils/papi_avail.c: papi_avail: fix the -e option to not print
	  spurious message  the "no events available" message should not be
	  printed if -e is being used

2018-09-27  Vince Weaver <vince@deater.net>

	* src/components/perf_event/perf_event.c: perf_event: avoid floating
	  point exception if running is 0  The perf_event interface isn't
	  supposed to return 0 for running, but it happens occasionally.  So
	  be sure not to divide by zero if this happens.  This makes the
	  rdpmc code match the generic perf code in this case.  This is in
	  response to bitbucket issue #52

2018-09-25  Heike Jagode <jagode@icl.utk.edu>

	* src/components/powercap/utils/powercap_plot.c: Temporary Fix: The
	  powercap component does not properly report energy values. At some
	  point in Nov 2017, the read() function was rewritten, which
	  resulted in numerous errors, such as: +++ the energy start values
	  are not subtracted from the read values. +++ wraparound is no
	  longer working properly. etc.  This commit serves as an immediate
	  workaround and adds a temporary fix to get the powercap_plot
	  utility working again. However, all this should and will be fixed
	  in the powercap component itself.

2018-09-21  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/cuda/tests/simpleMultiGPU.cu: Corrected a bug in the
	  CUPTI_ONLY version of simpleMultiGPU.cu. This manifested
	  specifically if the node has multiple GPUs and they are of
	  different models or types; in which case they can have differently
	  numbered PAPI events. We converted a scalar storing the eventID to
	  a vector with one eventID per GPU.

2018-09-19  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/nvml/tests/Makefile,
	  src/components/nvml/tests/benchSANVML.c,
	  .../nvml/tests/nvml_power_limit_read_test.cu,
	  .../nvml/tests/nvml_power_limiting_test.cu: new test files, more
	  cleanup on failure reporting.
	* src/components/cuda/tests/Makefile,
	  src/components/nvml/tests/Makefile,
	  .../nvml/tests/nvml_power_limiting_test.cu: Additions to Makefiles,
	  and several changes to power limiting testing to correct errors
	  when multiple GPUs are present, remove extraneous code, and provide
	  greater clarity in output and error messages.

2018-09-14  Heike Jagode <jagode@icl.utk.edu>

	* src/components/cuda/linux-cuda.c: Minor fix: return correct error
	  message if libcupti.so not found.

2018-09-13  Heike Jagode <jagode@icl.utk.edu>

	* src/components/cuda/linux-cuda.c: minor fix
	* src/components/cuda/linux-cuda.c: Bug fix: Instead of normalizing
	  all the event values to represent the total number of domain
	  instances on the device, only the last event value was normalized.

Tue Mar 20 09:37:56 2018 -0700  Steve Walk <steve.walk@cavium.com>

	* src/libpfm4/lib/events/arm_cavium_tx2_events.h: Update libpfm4
	  Current with ------------ commit
	  6c9e44b95a55b8bf62cbd64009c4c9b30964a66c  update Cavium ThunderX2
	  with now public events  This patch adds new model specific events
	  to the Cavium Thunder X2 core PMU. The updated list is based on
	  publicly available documentation from Cavium which is available at:
	  https://cavium.com/resources.html

2018-08-27  Vince Weaver <vincent.weaver@maine.edu>

	* src/components/rapl/linux-rapl.c: rapl: add support for AMD Fam17h
	  (Zen) CPUs  AMD Fam17h chips have a new RAPL-like interface that
	  supports energy measurement using register layouts like Intel RAPL,
	  but at a different MSR number.  This has been tested on an EPYC
	  system and the package value seems to be plausible, but as reproted
	  by the LIKWID people the cores value seems a bit too low.

2018-08-01  Anthony Castaldo <tonycastaldo@icl.utk.edu>

	* src/components/pcp/tests/Makefile2,
	  src/components/pcp/tests/README_BenchTesting.txt,
	  src/components/pcp/tests/benchPCP.c,
	  src/components/pcp/tests/benchPCP_script.sh,
	  src/components/pcp/tests/benchStats.c: benchmarking files and
	  README.

2018-07-23  Tony Castaldo <TonyCastaldo@icl.utk.edu>

	* ChangeLogP500.txt, RELEASENOTES.txt,
	  man/man1/papi_multiplex_cost.1, man/man3/PAPI_attach.3,
	  man/man3/PAPI_detach.3, man/man3/PAPI_get_dmem_info.3,
	  man/man3/PAPI_hw_info_t.3, man/man3/PAPI_overflow.3,
	  man/man3/PAPI_profil.3, src/Makefile.inc,
	  src/components/Makefile_comp_tests,
	  src/components/Makefile_comp_tests.target.in,
	  src/components/appio/tests/Makefile,
	  src/components/appio/tests/iozone/libasync.c,
	  src/components/appio/tests/iozone/makefile,
	  src/components/cuda/tests/Makefile, src/components/nvml/linux-
	  nvml.c, src/components/perfctr/perfctr-x86.c, src/configure.in,
	  src/ctests/Makefile.recipies, src/ctests/Makefile.target.in,
	  src/ctests/overflow_force_software.c, src/examples/Makefile,
	  src/examples/PAPI_overflow.c, src/freebsd/map-atom.c, src/freebsd
	  /map-core2-extreme.c, src/freebsd/map-core2.c,
	  src/ftests/Makefile.recipies, src/ftests/Makefile.target.in, src
	  /linux-context.h, src/linux-timer.c, src/papi.c, src/papi.h,
	  src/papi_events.csv, src/sw_multiplex.c, src/testlib/Makefile,
	  src/testlib/Makefile.target.in, src/utils/Makefile,
	  src/utils/Makefile.target.in, src/utils/papi_multiplex_cost.c,
	  src/validation_tests/Makefile.recipies,
	  src/validation_tests/Makefile.target.in: 8 patches to make system
	  from Andreas Beckmann

2018-06-27  Anthony Castaldo <tonycastaldo@icl.utk.edu>

	* src/components/pcp/linux-pcp.c: Removed a duplicated IF statement.
	  No difference in execution.

2018-06-25  Anthony Castaldo <tonycastaldo@icl.utk.edu>

	* src/components/pcp/linux-pcp.c: fixed pcp_init_component to show
	  any errors in reason for a disabled PCP component.

2018-06-22  Anthony Castaldo <tonycastaldo@icl.utk.edu>

	* src/components/pcp/README, src/components/pcp/linux-pcp.c,
	  src/components/pcp/tests/testPCP.c: fixed a debug print, added
	  'timescope' to testPCP output, completed README.
	* src/components/pcp/README: fixed up README file.

2018-06-21  Anthony Castaldo <tonycastaldo@icl.utk.edu>

	* src/components/pcp/linux-pcp.c, src/components/pcp/tests/testPCP.c:
	  removed debug code, added non-zeroing on instantaneous variables.

2018-06-19  Heike Jagode <jagode@icl.utk.edu>

	* src/components/cuda/sampling/Makefile,
	  src/components/cuda/tests/Makefile: Add cuda/lib64/stubs to linker
	  for cuda tests to link with libcuda.so.

2018-06-19  Anthony Castaldo <tonycastaldo@icl.utk.edu>

	* src/components/pcp/linux-pcp.c, src/components/pcp/tests/testPCP.c:
	  Code changes necessary to work on Power9.

2018-06-18  Anthony Castaldo <tonycastaldo@icl.utk.edu>

	* src/components/pcp/Rules.pcp, src/components/pcp/linux-pcp.c:
	  Corrections to allow compile and execution on Power9.

2018-06-15  Anthony Castaldo <tonycastaldo@saturn.icl.utk.edu>

	* src/components/pcp/README, src/components/pcp/Rules.pcp,
	  src/components/pcp/linux-pcp.c, src/components/pcp/tests/Makefile,
	  src/components/pcp/tests/testPCP.c: Initial coding of pcp component
	  and tester completed.

Wed Jun 13 23:49:10 2018 -0700  Stephane Eranian <eranian@gmail.com>

	* src/libpfm4/config.mk, src/libpfm4/debian/changelog: Update libpfm4
	  Current with ------------ commit
	  37d4628e37ba76c1ab586ab35e85340e30f7c523  update to version 4.10.1
	  - Fix build issues on Cavium Thunder X2 - Update Skylake event
	  table

Tue Jun 12 23:31:13 2018 -0700  Stephane Eranian <eranian@gmail.com>

	* src/libpfm4/lib/Makefile,
	  src/libpfm4/lib/events/intel_skl_events.h,
	  src/libpfm4/lib/pfmlib_common.c: Update libpfm4  Current with
	  ------------ commit fa65a75a8af5b4e2c360be41e66203e04735dfd2
	  update Skylake event table  Based on Intel's skykake_core_v40,json
	  event table from download.01.org.  Added
	  PARTIAL_RAT_STALLS.SCOREBOARD Added ROB_MISC_EVENT.PAUSE_INST Fixed
	  encodings of some umasks for L2_RQSTS

2018-06-12  Vince Weaver <vincent.weaver@maine.edu>

	* src/components/perf_event/perf_event.c,
	  src/ctests/Makefile.recipies, src/ctests/attach_validate.c: ctests:
	  add new attach_validate test  actually tries to validate the
	  counter values when attached  we might have an issue with rdpmc()
	  and attach and trying to make a test to catch it.

Thu Jun 7 11:38:48 2018 -0700  Stephane Eranian <eranian@gmail.com>

	* src/libpfm4/config.mk, src/libpfm4/debian/changelog: Update libpfm4
	  Current with ------------ commit
	  924437778d3fe75de5f7a43374ed6f4b1c0533a7  update to version 4.10.0
	  Update verison number to 4.10

2018-06-08  Steve Walk <swalk.cavium@gmail.com>

	* src/papi_events.csv: enable Cavium ThunderX2 support

2018-06-07  Anara Kozhokanova <akozhoka@vols.utk.edu>

	* src/components/cuda/README: Update README in CUDA component: added
	  '-i' flag to grep. Add a note about verifying whether the component
	  is active or not before using it.

Tue Jun 5 14:22:32 2018 -0700  William Cohen <wcohen@redhat.com>

	* src/libpfm4/python/self.py, src/libpfm4/python/src/pmu.py,
	  src/libpfm4/python/sys.py: Update libpfm4  Current with
	  ------------ commit 3106615db87f81f220efc13df7a4e36e31f1ee64
	  Import python print function  So that code works in the same manner
	  for python 2 and 3

Mon Jun 4 20:15:08 2018 -0700  William Cohen <wcohen@redhat.com>

	* src/libpfm4/lib/pfmlib_perf_event_pmu.c,
	  src/libpfm4/perf_examples/syst_count.c,
	  src/libpfm4/perf_examples/syst_smpl.c: Update libpfm4  Current with
	  ------------ commit 29f626744df184913a200532408e205e2b0ec2ec  Fix
	  error: '%s' directive output may be truncated  Newer versions of
	  gcc are more strict with regards to return values of snprintf(), so
	  check the values.

2018-06-01  Heike Jagode <jagode@icl.utk.edu>

	* src/Makefile.inc: Fixed 'make dist' step.

Mon May 28 13:50:44 2018 -0700  Stephane Eranian <eranian@gmail.com>

	* src/libpfm4/include/perfmon/pfmlib.h, src/libpfm4/lib/Makefile,
	  src/libpfm4/lib/events/arm_cavium_tx2_events.h,
	  src/libpfm4/lib/events/intel_skl_events.h,
	  src/libpfm4/lib/pfmlib_arm_armv8.c,
	  src/libpfm4/lib/pfmlib_common.c,
	  src/libpfm4/lib/pfmlib_intel_x86_arch.c,
	  src/libpfm4/lib/pfmlib_intel_x86_perf_event.c,
	  src/libpfm4/lib/pfmlib_intel_x86_priv.h,
	  src/libpfm4/lib/pfmlib_perf_event.c, src/libpfm4/lib/pfmlib_priv.h,
	  src/libpfm4/tests/validate_arm64.c,
	  src/libpfm4/tests/validate_x86.c: Update libpfm4  Current with
	  ------------  commit 488697d43bc5601ca51a22f7072169781d5b45b2  fix
	  typo in BUS_ACCESS event for Cavium ThunderX2  This patch fixes a
	  typo in event name for the Cavium ThunderX2 core PMU event list.
	  BUS_ACCESS_LD -> BUS_ACCESS_WR  Event list based on ARM
	  Architecture Reference Manual (ARM DDI 0487C.a).

2018-05-25  Vince Weaver <vincent.weaver@maine.edu>

	* src/ftests/Makefile.recipies, src/ftests/openmp.F: ftests: add an
	  openmp test

2018-04-30  Vince Weaver <vincent.weaver@maine.edu>

	* src/ctests/Makefile.recipies, src/ctests/destroy.c: ctests: add
	  destroy test  this checks to make sure that when we destroy
	  eventsets we aren't leaking file descriptors

Wed Apr 18 19:03:36 2018 +0200  André Wild <wild@linux.ibm.com>

	* src/libpfm4/lib/events/mips_74k_events.h,
	  src/libpfm4/lib/events/s390x_cpumf_events.h,
	  src/libpfm4/lib/pfmlib_intel_nhm_unc.c,
	  src/libpfm4/lib/pfmlib_intel_x86.c: Update libpfm4  Current with
	  ------------  commit 903d1c05ed72d45e5bebc1f2a1a1ae60b3ed1ee6 (HEAD
	  -> master, origin/master, origin/HEAD)  remove duplicate assignment
	  in pfm_nhm_unc_get_encoding  pe was assigned twice for no reason.
	  commit 37b7e406b77acf6115386cca43bab128e2a2d905  clarify
	  intel_x86_check_pebs()  This routine is not used right now because
	  we cannot determine in the x86 code whether or not PEBS has been
	  requested for an event. This is usually requested at the OS
	  interface level. But the patch keeps the code around in case we
	  need it later on.   commit 832e1a388d25ba39444505c2fa7ffb77f7537df5
	  fix typo in mip74k event name  OCP_WRITE_CACHEABLE REQUESTS ->
	  OCP_WRITE_CACHEABLE_REQUESTS  Reported-by: Andreas Beckmann
	  <anbe@debian.org>  commit 56cea590df7e77a1c1f1044e95d836cc01cfdb56
	  s390/cpumf: rename IBM z13/z14 counter names  Change the IBM
	  z13/z14 counter names to be in sync with all other models.

Wed Apr 4 18:45:18 2018 -0400  Heike Jagode <jagode@icl.utk.edu>

	* src/libpfm4/README, src/libpfm4/include/perfmon/pfmlib.h,
	  src/libpfm4/lib/pfmlib_common.c,
	  src/libpfm4/lib/pfmlib_intel_knl_unc_cha.c,
	  src/libpfm4/lib/pfmlib_intel_knl_unc_edc.c,
	  src/libpfm4/lib/pfmlib_intel_knl_unc_imc.c,
	  src/libpfm4/lib/pfmlib_intel_knl_unc_m2pcie.c,
	  src/libpfm4/lib/pfmlib_intel_snbep_unc.c,
	  src/libpfm4/lib/pfmlib_intel_snbep_unc_priv.h,
	  src/libpfm4/lib/pfmlib_priv.h, src/libpfm4/tests/validate_x86.c:
	  Update libpfm4  Current with ------------  commit
	  c4de2ea3b50fa14e66129b06619775840aafab2a  Add support for Intel KNM
	  uncore events  This patch adds Intel Knights Mill uncore event
	  support for: CHA uncore PMU Integrated EDRAM uncore PMU Integrated
	  Memory Controller (IMC) uncore PMU M2PCIe uncore PMU  It is based
	  on the Knights Landing event table, which is shared with Knights
	  Mill.

2018-04-02  Heike Jagode <jagode@icl.utk.edu>

	* src/papi_events.csv: PAPI preset event support for Intel Knights
	  Mill.

Mon Mar 19 23:53:23 2018 -0700  Stephane Eranian <eranian@gmail.com>

	* src/libpfm4/README, src/libpfm4/docs/Makefile,
	  src/libpfm4/docs/man3/libpfm_intel_knm.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_cha.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_iio.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_imc.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_irp.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_m2m.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_m3upi.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_pcu.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_ubo.3,
	  src/libpfm4/docs/man3/libpfm_intel_skx_unc_upi.3,
	  src/libpfm4/examples/check_events.c,
	  src/libpfm4/examples/showevtinfo.c,
	  src/libpfm4/include/perfmon/pfmlib.h, src/libpfm4/lib/Makefile,
	  src/libpfm4/lib/events/intel_bdw_events.h,
	  src/libpfm4/lib/events/intel_bdx_unc_cbo_events.h,
	  src/libpfm4/lib/events/intel_bdx_unc_ha_events.h,
	  src/libpfm4/lib/events/intel_bdx_unc_imc_events.h,
	  src/libpfm4/lib/events/intel_bdx_unc_irp_events.h,
	  .../lib/events/intel_bdx_unc_r3qpi_events.h,
	  src/libpfm4/lib/events/intel_bdx_unc_sbo_events.h,
	  .../lib/events/intel_ivbep_unc_pcu_events.h,
	  src/libpfm4/lib/events/intel_skl_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_cha_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_iio_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_imc_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_irp_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_m2m_events.h,
	  .../lib/events/intel_skx_unc_m3upi_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_pcu_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_ubo_events.h,
	  src/libpfm4/lib/events/intel_skx_unc_upi_events.h,
	  src/libpfm4/lib/pfmlib_common.c,
	  src/libpfm4/lib/pfmlib_intel_bdx_unc_pcu.c,
	  src/libpfm4/lib/pfmlib_intel_hswep_unc_pcu.c,
	  src/libpfm4/lib/pfmlib_intel_ivbep_unc_pcu.c,
	  src/libpfm4/lib/pfmlib_intel_knl.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_cha.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_iio.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_imc.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_irp.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_m2m.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_m3upi.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_pcu.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_ubo.c,
	  src/libpfm4/lib/pfmlib_intel_skx_unc_upi.c,
	  src/libpfm4/lib/pfmlib_intel_snbep_unc.c,
	  .../lib/pfmlib_intel_snbep_unc_perf_event.c,
	  src/libpfm4/lib/pfmlib_intel_snbep_unc_priv.h,
	  src/libpfm4/lib/pfmlib_intel_x86.c,
	  src/libpfm4/lib/pfmlib_intel_x86_perf_event.c,
	  src/libpfm4/lib/pfmlib_intel_x86_priv.h,
	  src/libpfm4/lib/pfmlib_priv.h,
	  src/libpfm4/lib/pfmlib_s390x_cpumf.c,
	  src/libpfm4/perf_examples/perf_util.c, src/libpfm4/python/self.py,
	  src/libpfm4/python/src/pmu.py, src/libpfm4/python/sys.py,
	  src/libpfm4/tests/validate.c, src/libpfm4/tests/validate_x86.c:
	  Update libpfm4  Current with ------------  commit
	  7987ff8978d4ceef07a539e822c1b582f8924720 (HEAD -> master,
	  origin/master, origin/HEAD)  fix 32-bit compile on skx_cha_filt0
	  The bit field was too wide, so break it in two to keep gcc -m32
	  happy.   commit d60d8955580e7f27c5a269c636d6dcb50eef287d  Add
	  support for Intel KNM core events  This patch adds Intel Knights
	  Mill core event support for libpfm4. It is based on the Knights
	  Landing event table, which is shared with Knights Mill.   commit
	  3fdae82b5e028a388510798f1f0c84d1139a1735  fix headers on Intel
	  Skylake Uncore PMU files  Fix the header with proper copyright
	  line.   commit e26ca9492ae26a0150b81828306af3a6e132e488  Fix empty
	  event descriptions for Intel Broadwell-EP uncore PMUs Now that we
	  have empty description detection, fix the ones detected in the
	  Intel Broadwell-EP uncore PMUs.   commit
	  05fc5910b78526d3cba3160713f467d9dcc0774b  detect empty event/umask
	  descriptions on Intel processors  This patch adds a validation test
	  to detect empty descriptions for events and umasks on Intel X86
	  processors.

2018-02-28  John Henry <jhenry@icl.utk.edu>

	* INSTALL.txt: Fixed typo --with_bitmode=32 changed to --with-
	  bitmode=32

2018-02-23  Vince Weaver <vincent.weaver@maine.edu>

	* src/ctests/hl_rates.c, src/ctests/inherit.c, src/papi_hl.c: ctests:
	  change a few more test results from FAIL to SKIP when paranoid=3
	  there are some more that fail, but their failure errors make no
	  sense and are coming from deep within PAPI so I am not sure I can
	  easily fix things without making it worse.
	* src/ctests/attach2.c, src/ctests/attach3.c,
	  src/ctests/attach_cpu.c: ctests: attach tests, skip instead of fail
	  if not enough permissions
	* src/papi_internal.c: papi_internal: whitespace cleanup (no code
	  changes)
	* src/utils/papi_avail.c, src/utils/papi_native_avail.c: utils:
	  papi_avail/native_avail suggest papi_component_avail if no events
	  detected  If no events are detected, let the user know they should
	  use papi_component_avail to find out why.
	* src/papi_internal.c: papi_internal: comment the error generation
	  code  I'm not sure why we generate things this way, but it makes it
	  really confusing when adding a new error.
	* src/genpapifdef.c, src/papi.h, src/papi_common_strings.h,
	  src/papi_internal.c: add new PAPI_ECMP_DISABLED error  We can
	  return this error if an event is added but the component involved
	  is disabled.  If a user moves working code to a system where
	  perf_event_paranoid is set to 3 (all perf events disabled) they
	  will now get an error indicating the component is disabled rather
	  than an "event not found" error which was confusing.
	* src/ctests/zero.c: ctests: zero: print full error message if cannot
	  add

2018-02-21  Vince Weaver <vincent.weaver@maine.edu>

	* src/utils/papi_component_avail.c: utils: papi_component_avail: fix
	  the NAME field in the auto-generated manpage  Steve Kaufmann
	  noticed that the papi_component_avail NAME field for the auto-
	  generated manpage for some reason had info for papi_native_avail
	  instead.

2018-02-16  Heike Jagode <jagode@saturn.icl.utk.edu>

	* src/configure, src/configure.in: Fixed compilation error that
	  occurs with deprecated option '-openmp' when using a more current
	  icc compiler.  Replaced with '-qopenmp'.  Tested with: icc/2016.0
	  icc/2017.4 icc/2018 icc/2018.1  Reported by Preeti Suman from
	  Intel.

Wed Feb 7 09:51:16 2018 -0800  Stephane Eranian <eranian@gmail.com>

	* src/libpfm4/lib/events/intel_skl_events.h,
	  src/libpfm4/lib/events/s390x_cpumf_events.h,
	  src/libpfm4/lib/pfmlib_s390x_cpumf.c,
	  src/libpfm4/lib/pfmlib_s390x_priv.h: Update libpfm4 Current with
	  commit 8f2653b8e2e18bad44ba1acc7f92c825f226ef71  s390/cpumf: add
	  support for IBM z14 counters  Add counter definitions for the IBM
	  z14 hardware model.  With z14, the counters in the problem-state
	  set are reduced and the counter first number version is increased
	  accordingly.  Now, the counters are processed depending on the
	  counter facility versions.   commit
	  96c0847f524b0b23e189478315587abf35cbf774  add CORE_SNOOP_RESPONSE
	  event for Intel Skylake  This is a newly disclosed event of Intel
	  Skylake Core PMU. Based on download.01.org skylakex_core_v1.06.json
	  event table.

Thu Jan 25 19:23:45 2018 -0800  Stephane Eranian <eranian@gmail.com>

	* src/libpfm4/config.mk, src/libpfm4/debian/changelog,
	  src/libpfm4/lib/events/perf_events.h,
	  src/libpfm4/lib/pfmlib_perf_event_pmu.c,
	  src/libpfm4/tests/Makefile, src/libpfm4/tests/validate.c,
	  src/libpfm4/tests/validate_perf.c: Update libpfm4 Current with
	  commit 18e3c1f0254ab9323ac848643b8e042e65cf5259  Add minimal
	  perf_events generic events validation  This patch adds a small
	  validation tests suite for the generic PMU event provide by the
	  perf_events interface. This is specific to Linux.  This patch
	  modifies the validate.c file to handle the new perf_events test
	  suite.

2018-01-24  Vince Weaver <vincent.weaver@maine.edu>

	* src/components/Makefile_comp_tests.target.in,
	  src/components/perf_event_uncore/tests/Makefile,
	  src/ctests/Makefile.recipies, src/ctests/Makefile.target.in,
	  src/ftests/Makefile.target.in, src/utils/Makefile.target.in,
	  src/validation_tests/Makefile.target.in: build: fix various
	  LDFLAGS/CFLAGS issues  issues were reported by Andreas Beckmann
	  <anbe@debian.org>

2018-01-22  Vince Weaver <vincent.weaver@maine.edu>

	* src/utils/papi_cost.c: utils: papi_cost: uset getopt() to parse
	  command line rather than open-coding one  The existing code was
	  fragile and also as far as I can tell the -b option hadn't worked
	  for a long time.
	* src/utils/papi_cost.c: utils: papi_cost: various minor cleanups to
	  the code
	* src/utils/cost_utils.c, src/utils/cost_utils.h,
	  src/utils/papi_cost.c: utils: papi_cost: add -p option for printing
	  boxplot percentages  makes generating boxplots from the results
	  much easier

2018-01-05  John Henry <jhenry@icl.utk.edu>

	* release_procedure.txt: Fix typo in release_procedure.txt. Missing
	  do