Update Modules [30 October 2024, 15:43]

Author: admin6

mkdocs/docs/HPC/only/gent/available_software/data/json_data.json

@@ -0,0 +1,24 @@
+---
+hide:
+  - toc
+---
+
+CIRCE
+=====
+
+# Available modules
+
+
+The overview below shows which CIRCE installations are available per HPC-UGent Tier-2 cluster, ordered based on software version (new to old).
+
+To start using CIRCE, load one of these modules using a `module load` command like:
+
+```shell
+module load CIRCE/0.3.4-foss-2023a
+```
+
+*(This data was automatically generated on {{modules_last_updated}})*  
+
+| |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
+| :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|CIRCE/0.3.4-foss-2023a|x|x|x|x|-|x|x|

mkdocs/docs/HPC/only/gent/available_software/data/json_data_detail.json

@@ -14,12 +14,13 @@ The overview below shows which Perl-bundle-CPAN installations are available per
 To start using Perl-bundle-CPAN, load one of these modules using a `module load` command like:
 
 ```shell
-module load Perl-bundle-CPAN/5.38.0-GCCcore-13.2.0
+module load Perl-bundle-CPAN/5.38.2-GCCcore-13.3.0
 ```
 
 *(This data was automatically generated on {{modules_last_updated}})*  
 
 | |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
 | :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|Perl-bundle-CPAN/5.38.2-GCCcore-13.3.0|x|x|x|x|-|x|x|
 |Perl-bundle-CPAN/5.38.0-GCCcore-13.2.0|x|x|x|x|x|x|x|
 |Perl-bundle-CPAN/5.36.1-GCCcore-12.3.0|x|x|x|x|x|x|x|

mkdocs/docs/HPC/only/gent/available_software/detail/CIRCE.md

@@ -0,0 +1,24 @@
+---
+hide:
+  - toc
+---
+
+PyBioLib
+========
+
+# Available modules
+
+
+The overview below shows which PyBioLib installations are available per HPC-UGent Tier-2 cluster, ordered based on software version (new to old).
+
+To start using PyBioLib, load one of these modules using a `module load` command like:
+
+```shell
+module load PyBioLib/1.2.205-GCCcore-12.3.0
+```
+
+*(This data was automatically generated on {{modules_last_updated}})*  
+
+| |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
+| :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|PyBioLib/1.2.205-GCCcore-12.3.0|x|x|x|x|-|x|x|

mkdocs/docs/HPC/only/gent/available_software/detail/Perl-bundle-CPAN.md

@@ -0,0 +1,24 @@
+---
+hide:
+  - toc
+---
+
+Solids4foam
+===========
+
+# Available modules
+
+
+The overview below shows which Solids4foam installations are available per HPC-UGent Tier-2 cluster, ordered based on software version (new to old).
+
+To start using Solids4foam, load one of these modules using a `module load` command like:
+
+```shell
+module load Solids4foam/2.1-foss-2023a
+```
+
+*(This data was automatically generated on {{modules_last_updated}})*  
+
+| |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
+| :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|Solids4foam/2.1-foss-2023a|x|x|x|x|-|x|x|

mkdocs/docs/HPC/only/gent/available_software/detail/PyBioLib.md

@@ -0,0 +1,24 @@
+---
+hide:
+  - toc
+---
+
+geocube
+=======
+
+# Available modules
+
+
+The overview below shows which geocube installations are available per HPC-UGent Tier-2 cluster, ordered based on software version (new to old).
+
+To start using geocube, load one of these modules using a `module load` command like:
+
+```shell
+module load geocube/0.4.3-foss-2023a
+```
+
+*(This data was automatically generated on {{modules_last_updated}})*  
+
+| |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
+| :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|geocube/0.4.3-foss-2023a|x|x|x|x|-|x|x|

mkdocs/docs/HPC/only/gent/available_software/detail/Solids4foam.md

@@ -14,13 +14,14 @@ The overview below shows which groff installations are available per HPC-UGent T
 To start using groff, load one of these modules using a `module load` command like:
 
 ```shell
-module load groff/1.23.0-GCCcore-13.2.0
+module load groff/1.23.0-GCCcore-13.3.0
 ```
 
 *(This data was automatically generated on {{modules_last_updated}})*  
 
 | |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
 | :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|groff/1.23.0-GCCcore-13.3.0|x|x|x|x|-|x|x|
 |groff/1.23.0-GCCcore-13.2.0|x|x|x|x|x|x|x|
 |groff/1.22.4-GCCcore-12.3.0|x|x|x|x|x|x|x|
 |groff/1.22.4-GCCcore-12.2.0|x|x|x|x|-|x|-|

mkdocs/docs/HPC/only/gent/available_software/detail/geocube.md

@@ -0,0 +1,25 @@
+---
+hide:
+  - toc
+---
+
+modkit
+======
+
+# Available modules
+
+
+The overview below shows which modkit installations are available per HPC-UGent Tier-2 cluster, ordered based on software version (new to old).
+
+To start using modkit, load one of these modules using a `module load` command like:
+
+```shell
+module load modkit/0.4.1-GCCcore-13.3.0
+```
+
+*(This data was automatically generated on {{modules_last_updated}})*  
+
+| |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
+| :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|modkit/0.4.1-GCCcore-13.3.0|x|-|x|-|-|x|x|
+|modkit/0.3.3-GCCcore-12.3.0|x|x|x|-|-|x|x|

mkdocs/docs/HPC/only/gent/available_software/detail/groff.md

@@ -14,13 +14,14 @@ The overview below shows which rasterio installations are available per HPC-UGen
 To start using rasterio, load one of these modules using a `module load` command like:
 
 ```shell
-module load rasterio/1.3.8-foss-2022b
+module load rasterio/1.3.9-foss-2023a
 ```
 
 *(This data was automatically generated on {{modules_last_updated}})*  
 
 | |accelgor|doduo|donphan|gallade|joltik|shinx|skitty|
 | :---: | :---: | :---: | :---: | :---: | :---: | :---: | :---: |
+|rasterio/1.3.9-foss-2023a|x|x|x|x|-|x|x|
 |rasterio/1.3.8-foss-2022b|x|x|x|x|-|-|-|
 |rasterio/1.2.10-foss-2021b|x|x|x|-|-|-|-|
 |rasterio/1.1.7-foss-2020a-Python-3.8.2|-|x|x|-|-|-|-|