migrate.sh

#!/bin/bash
#
#
#  remastersys-installer is an alternative installer for remastered livecd/dvd's
#
#
#  Created by Tony "Fragadelic" Brijeski
#
#  Copyright 2008-2012 Under the GNU GPL2 License
#
#  Originally Created September 12th,2008
#  Updated to replace zenity with yad July 2012
#
#
#

#  This script requires dialog to run, rsync and ssh.
#

# checking to make sure script is running with root privileges

testroot="`whoami`"

if [ "$testroot" != "root" ]; then
echo " Must be run as root - exiting"
exit 1
fi

# set options depending on mode - text or gui

cd .

testdialog=`which dialog`
DIALOG="`which dialog`"
HEIGHT="17"
WIDTH="50"
MENUHEIGHT="12"
TITLE="--title "
TEXT=""
ENTRY="--inputbox "
MENU="--menu"
YESNO="--yesno "
MSGBOX="--msgbox "
PASSWORD="--passwordbox "
PARTITIONPROG="cfdisk"
TITLETEXT="Remastersys Live Installer"

SSH="which ssh"
RSYNC="which rsync"



if [ "$DIALOG" = "" ]; then
echo "Cannot find dialog  Exiting."
exit 1
fi



if [ "$RSYNC" = "" ]; then
echo "Cannot find rsync  Exiting."
exit 1
fi



if [ "$SSH" = "" ]; then
echo "Cannot find ssh  Exiting."
exit 1



progressbar () {
tail -f remastersys-installer | $DIALOG $TITLE"$TITLETEXT" $TEXT"$@" --no-buttons --progress --pulsate --auto-close
}


if [ "$LIVECDLABEL" != "" ]; then
TITLETEXT="$LIVECDLABEL Installer"
fi


$DIALOG $TITLE"$TITLETEXT" $MSGBOX $TEXT"We need to prepare a swap and install partition now.\n\n$PARTITIONPROG will allow you to create the new partitions.\n\nYou must create or have 1 install partition and 1 swap partition.\n\nIf you already have partitions setup then just quit $PARTITIONPROG and installation will continue.\n\nClick OK to continue." $HEIGHT $WIDTH

#choose the drive to partition
CKLIVE=`mount | grep "live" | grep -v "loop" | awk '{print $1}' | awk -F "/" '{print $3}' | sed -e 's/[0-9]//g'`
DRIVES=`cat /proc/partitions | grep -v "$CKLIVE" | grep -v loop | grep -v major | grep -v "^$" | awk '{print $4}' | grep -v "[0-9]"`

for i in $DRIVES; do
  partdrive="$i"
  partdrivesize=`grep -m 1 "$i" /proc/partitions | awk '{print $3}'`
  partdrivemenu="$partdrivemenu $partdrive $partdrivesize"
done


$DIALOG $TITLE"$TITLETEXT" $MENU $TEXT"Please select a drive to partition.\nIf the only option you see is to Quit the installer then no drives were found." $HEIGHT $WIDTH $MENUHEIGHT Exit "Quit the installer" $partdrivemenu 2>/tmp/choice.$$

if [ "$?" = "0" ]; then
PARTDRIVE=`cat /tmp/choice.$$`
else
PARTDRIVE="Exit"
fi
rm /tmp/choice.$$

if [ "$PARTDRIVE" = "Exit" ]; then
  $DIALOG $TITLE"$TITLETEXT" $MSGBOX $TEXT"Quitting the installer now." $HEIGHT $WIDTH
  exit 1
fi

$PARTITIONPROG /dev/$PARTDRIVE

#find the swap partition
TARGETSWAP=`fdisk -l | grep swap | awk '{print $1}' | cut -d "/" -f3`
#TARGETSWAP=`echo $TARGETSWAP | sed -r "s/\/dev\///g"`
for i in $TARGETSWAP; do
 swappart="$i"
 swappartsize=`grep -m 1 "$i" /proc/partitions | awk '{print $3}'`
 swappartmenu="$swappartmenu $swappart $swappartsize"
done

$DIALOG $TITLE"$TITLETEXT" $MENU $TEXT"Please select a swap partition to use.\nIf the only option you see is to Quit the installer then no swap partitions were found." $HEIGHT $WIDTH $MENUHEIGHT Exit "Quit the installer" $swappartmenu 2>/tmp/choice.$$


if [ "$?" = "0" ]; then
SWAP=`cat /tmp/choice.$$`
else
SWAP="Exit"
fi
rm /tmp/choice.$$

if [ "$SWAP" = "Exit" ]; then
  $DIALOG $TITLE"$TITLETEXT" $MSGBOX $TEXT"Quitting the installer now." $HEIGHT $WIDTH
  exit 1
fi

#choose the partition to install to
CKLIVE=`mount | grep "live" | grep -v "loop"  | awk '{print $1}' | awk -F "/" '{print $3}'`
PARTITIONS=`cat /proc/partitions | grep -v "$CKLIVE" | grep -v "loop" | grep -v "sr0" | awk '{print $4}' | grep "[0-9]"`
PARTINSTTEMP=`echo $PARTITIONS | sed -r "s/$SWAP//"`
PARTINST=`echo $PARTINSTTEMP`
for i in $PARTINST; do
tempsize=`grep -m 1 "$i" /proc/partitions | awk '{print $3}'`
if [ "$tempsize" = "1" ]; then
PARTINST=`echo $PARTINST | sed -r "s/$i//"`
fi
done


for i in $PARTINST; do
  part="$i"
  partsize=`grep -m 1 "$i" /proc/partitions | awk '{print $3}'`
  partmenu="$partmenu $part $partsize"
done


$DIALOG $TITLE"$TITLETEXT" $MENU $TEXT"Please select a partition to install the root system to.\nIf the only option you see is to Quit the installer then no partitions were found." $HEIGHT $WIDTH $MENUHEIGHT Exit "Quit the installer" $partmenu 2>/tmp/choice.$$

if [ "$?" = "0" ]; then
TARGETPART=`cat /tmp/choice.$$`
else
TARGETPART="Exit"
fi
rm /tmp/choice.$$

if [ "$TARGETPART" = "Exit" ]; then
  $DIALOG $TITLE"$TITLETEXT" $MSGBOX $TEXT"Quitting the installer now." $HEIGHT $WIDTH
  exit 1
fi

#choose filesystem type
$DIALOG $TITLE"$TITLETEXT" $MENU $TEXT"Please select filesystem type for the root partition" $HEIGHT $WIDTH $MENUHEIGHT ext2 "Ext2 filesystem" ext3 "Ext3 filesystem" ext4 "Ext4 filesystem" 2>/tmp/choice.$$

if [ "$?" = "0" ]; then
FSTYPE=`cat /tmp/choice.$$`
else
FSTYPE="ext3"
fi
rm /tmp/choice.$$


HOMEINST=`echo $PARTINST | sed -r "s/$TARGETPART//"`

for i in $HOMEINST; do
  homepart="$i"
  homepartsize=`grep -m 1 "$i" /proc/partitions | awk '{print $3}'`
  homepartmenu="$homepartmenu $homepart $homepartsize"
done

$DIALOG $TITLE"$TITLETEXT" $MENU $TEXT"Please select a partition to install /home to.\nIf the only option you see is root then no extra partitions were found." $HEIGHT $WIDTH $MENUHEIGHT root "put /home on the root partition" $homepartmenu 2>/tmp/choice.$$

if [ "$?" = "0" ]; then
HOMEPART=`cat /tmp/choice.$$`
else
HOMEPART="root"
fi
rm /tmp/choice.$$

if [ "$HOMEPART" != "root" ]; then
#choose filesystem type
$DIALOG $TITLE"$TITLETEXT" $MENU $TEXT"Please select filesystem type for the home partition" $HEIGHT $WIDTH $MENUHEIGHT noformat "Do Not Format the home partition - not recommended unless you know what you are doing" ext2 "Ext2 filesystem" ext3 "Ext3 filesystem" ext4 "Ext4 filesystem" 2>/tmp/choice.$$

if [ "$?" = "0" ]; then
HFSTYPE=`cat /tmp/choice.$$`
else
HFSTYPE="ext3"
fi
rm /tmp/choice.$$

fi

#check mode and get new user info if it is a dist mode
testmode=`grep "1000" /etc/passwd | grep -v "Live"`

if [ "$testmode" = "" ]; then

#root password entry section
TARGETROOTPASS="1"
TARGETROOTPASS2="2"

while [ "$TARGETROOTPASS" != "$TARGETROOTPASS2" ]; do

$DIALOG $TITLE"$TITLETEXT" $PASSWORD $TEXT"Please enter the password for root." $HEIGHT $WIDTH 2>/tmp/choice.$$
if [ "$?" = "0" ]; then
TARGETROOTPASS=`cat /tmp/choice.$$`
else
exit 1
fi
rm /tmp/choice.$$
$DIALOG $TITLE"$TITLETEXT" $PASSWORD $TEXT"Please enter the password for root again." $HEIGHT $WIDTH 2>/tmp/choice.$$
if [ "$?" = "0" ]; then
TARGETROOTPASS2=`cat /tmp/choice.$$`
else
exit 1
fi
rm /tmp/choice.$$

if [ "$TARGETROOTPASS" != "$TARGETROOTPASS2" ]; then
$DIALOG $TITLE"$TITLETEXT" $MSGBOX $TEXT"Passwords do not match. Lets try again." $HEIGHT $WIDTH
fi

done

rm /tmp/choice.$$

#username input secton

$DIALOG $TITLE"$TITLETEXT" $ENTRY $TEXT"Please enter the new user's real name to be setup on the installed system." $HEIGHT $WIDTH 2>/tmp/choice.$$
if [ "$?" = "0" ]; then
TARGETUSERFULLNAME=`cat /tmp/choice.$$`
else
exit 1
fi
rm /tmp/choice.$$


$DIALOG $TITLE"$TITLETEXT" $ENTRY $TEXT"Please enter the new username to be setup on the installed system.\nMust be in lowercase letters only." $HEIGHT $WIDTH 2>/tmp/choice.$$
if [ "$?" = "0" ]; then
TARGETUSER=`cat /tmp/choice.$$`
else
exit 1
fi
rm /tmp/choice.$$


#make sure its all lowercase just in case
TARGETUSER="`echo $TARGETUSER | awk '{print tolower ($0)}'`"


#password entry section

TARGETPASS="1"
TARGETPASS2="2"

while [ "$TARGETPASS" != "$TARGETPASS2" ]; do

$DIALOG $TITLE"$TITLETEXT" $PASSWORD $TEXT"Please enter the password for $TARGETUSER." $HEIGHT $WIDTH 2>/tmp/choice.$$
if [ "$?" = "0" ]; then
TARGETPASS=`cat /tmp/choice.$$`
else
exit 1
fi
rm /tmp/choice.$$
$DIALOG $TITLE"$TITLETEXT" $PASSWORD $TEXT"Please enter the password for $TARGETUSER again." $HEIGHT $WIDTH 2>/tmp/choice.$$
if [ "$?" = "0" ]; then
TARGETPASS2=`cat /tmp/choice.$$`
else
exit 1
fi
rm /tmp/choice.$$

if [ "$TARGETPASS" != "$TARGETPASS2" ]; then
$DIALOG $TITLE"$TITLETEXT" $MSGBOX $TEXT"Passwords do not match. Lets try again." $HEIGHT $WIDTH
fi

done

rm /tmp/choice.$$

fi


#hostname setup
$DIALOG $TITLE"$TITLETEXT" $ENTRY $TEXT"Please enter the hostname for the installed system." $HEIGHT $WIDTH 2>/tmp/choice.$$
if [ "$?" = "0" ]; then
TARGETHOSTNAME=`cat /tmp/choice.$$`
else
exit 1
fi
rm /tmp/choice.$$


#grub location
GrubSelectText () {

## Blank the array in case this function is being rerun
GrubMenu=()
CKLIVE=`mount | grep "live" | grep -v "loop" | awk '{print $1}' | awk -F "/" '{print $3}' | sed -e 's/[0-9]//g'`
Drives=$(cat /proc/partitions | grep -v "$CKLIVE" | grep -v loop | grep -v "Extended" | grep -v "extended" | grep -v "swap" | grep -v "Swap" | grep -v "Hidden" | grep -v major | grep -v "^$" | awk '{ print $4}')

for i in $Drives; do
PartDrive="$i"

if [ "$(echo "$PartDrive" | grep [0-9] )" = "" ]; then
 GrubMenu=("${GrubMenu[@]}" "$PartDrive" "Master boot record of disk")
fi
done

GrubMenu=( "${GrubMenu[@]}" "root" "Root partition - safe choice if you use a different boot manager" "rootmbr" "MBR of the root partition - this is what you want for a usb install" )

#grub location
$DIALOG $TITLE"$TITLETEXT" $MENU $TEXT"Please select where to install grub to.\n" $HEIGHT $WIDTH $MENUHEIGHT "${GrubMenu[@]}" 2>/tmp/choice.$$

if [ "$?" = "0" ]; then
GRUBLOCTEST=`cat /tmp/choice.$$`
fi
rm /tmp/choice.$$

if [ "$GRUBLOCTEST" = "root" ]; then
GRUBLOCTEXT="root partition of $TARGETPART"
GRUBLOC="/dev/$TARGETPART"
elif [ "$GRUBLOCTEST" = "rootmbr" ]; then
GRUBLOCTEXT="mbr of root partition of $TARGETPART"
GRUBLOC="/dev/$PARTDRIVE"
elif [ "$GRUBLOCTEST" = "" ]; then
GrubSelectText
exit 0
else
GRUBLOCTEXT="master boot record of $GRUBLOCTEST"
GRUBLOC="/dev/$GRUBLOCTEST"
fi

}

GrubSelectText

### el formateo de las particiones.

if [ "$HOMEPART" != "root" ]; then
HOMETEXT=", $HOMEPART will be formatted $HFSTYPE for /home "
fi

if [ "$HFSTYPE" = "noformat" ]; then
HOMETEXT=", $HOMEPART will not be formatted but used for \n/home "
fi


if [ "$testmode" = "" ]; then
$DIALOG $TITLE"$TITLETEXT" $YESNO $TEXT"Please verify that this information is correct.\n\nNew user $TARGETUSER will be created on the $FSTYPE formatted $TARGETPART partition$HOMETEXT and grub will be installed to the $GRUBLOCTEXT.\n\nDo you want to continue?" $HEIGHT $WIDTH
if [ $? != 0 ]; then
exit 0
fi
else
$DIALOG $TITLE"$TITLETEXT" $YESNO $TEXT"Please verify that this information is correct.\nYour backup mode system will be installed on $FSTYPE formatted $TARGETPART partition$HOMETEXT and grub will be installed to the $GRUBLOCTEXT.\n\nDo you want to continue?" $HEIGHT $WIDTH
if [ $? != 0 ]; then
exit 0
fi
fi

#END TEXT MODE#########################################################################################################################################


#
#
#
#install_to_hd section##########################################################################################################################
#
#
#


if [ "$GUI" != "" ]; then
progressbar "Setting up SWAP Now...Please Wait \n" &
fi

sleep 2
echo "Preparing swap partition now"
mkswap /dev/$SWAP
swapon /dev/$SWAP
if [ "$GUI" != "" ]; then
killall -KILL tail
fi
if [ "$GUI" != "" ]; then
progressbar "Formatting $TARGETPART Now...Please Wait \n" &
fi
echo "Formatting the $TARGETPART partition now"

## Preserve kernel options in the new grub system
NewGrubDefLine="$(cat /proc/cmdline | awk -F 'config ' '{print $2}' | awk -F ' BOOT' '{print $1}')"

OldGrubDefLine=$(grep -B 0  "GRUB_CMDLINE_LINUX_DEFAULT=" /etc/default/grub)
OldGrubLine=$(grep -B 0  "GRUB_CMDLINE_LINUX=" /etc/default/grub)
sed -i -e "s/$OldGrubDefLine/GRUB_CMDLINE_LINUX_DEFAULT=\"$NewGrubDefLine\"/g" /etc/default/grub
sed -i -e "s/$OldGrubLine/GRUB_CMDLINE_LINUX=\"\"/g" /etc/default/grub

#make the filesystem and mount the partition on /TARGET
if [ "`mount | grep $TARGETPART`" ]; then
echo "Unmounting the partition we are going to use and format now"
umount /dev/$TARGETPART
fi
mke2fs -t $FSTYPE /dev/$TARGETPART
mkdir -p /TARGET
sleep 2
echo "Mounting the TARGET partition now"
mount /dev/$TARGETPART /TARGET -o rw
sleep 2
echo "Using tune2fs to prevent the forced checks on boot"
tune2fs -c 0 -i 0 /dev/$TARGETPART 
rm -rf "/TARGET/lost+found"
if [ "$GUI" != "" ]; then
killall -KILL tail
fi
if [ "$HOMEPART" != "root" ]; then
if [ "$HFSTYPE" != "noformat" ]; then
if [ "$GUI" != "" ]; then
progressbar "Formatting $HOME Now...Please Wait \n" &
fi
echo "Formatting the $HOME partition now"
if [ "`mount | grep $HOMEPART`" ]; then
echo "Unmounting the partition we are going to use and format now"
umount /dev/$HOMEPART
fi
mke2fs -t $HFSTYPE /dev/$HOMEPART
fi
echo "Mounting the TARGET home partition now"
mkdir -p /TARGET/home
mount /dev/$HOMEPART /TARGET/home -o rw
tune2fs -c 0 -i 0 /dev/$HOMEPART
rm -rf "/TARGET/home/lost+found"
sleep 2
# Get fs type for home partition in case the user chose not to format
if [ "$HFSTYPE" = "noformat" ]; then
HFSTYPE=`mount | grep "/dev/$HOMEPART" | awk '{print $5}'`
fi
if [ "$GUI" != "" ]; then
killall -KILL tail
fi


fi


testmode=`grep "1000" /etc/passwd | grep -v "Live"`

if [ "$testmode" = "" ]; then
LIVEMODE="DIST"
else
LIVEMODE="BACKUP"
fi

cat > /var/log/remastersys-installer.log <<FOO
==============================
Remastersys-Installer log file
==============================
LIVEMODE=$LIVEMODE
==============================================================
GUI=$GUI
==============================================================
TARGETUSER=$TARGETUSER
==============================================================
TARGETHOSTNAME=$TARGETHOSTNAME
==============================================================
SWAP=$SWAP
==============================================================
TARGETPART=$TARGETPART
==============================================================
FSTYPE=$FSTYPE
==============================================================
HOMEPART=$HOMEPART
==============================================================
HFSTYPE=$HFSTYPE
==============================================================
GRUBLOC=$GRUBLOC
==============================================================
FOO

echo "==============================================================" >> /var/log/remastersys-installer.log
echo "MOUNTS" >> /var/log/remastersys-installer.log
echo "==============================================================" >> /var/log/remastersys-installer.log
mount >> /var/log/remastersys-installer.log
echo "==============================================================" >> /var/log/remastersys-installer.log
echo "FDISK listing" >> /var/log/remastersys-installer.log
echo "==============================================================" >> /var/log/remastersys-installer.log
fdisk -l >> /var/log/remastersys-installer.log
echo "==============================================================" >> /var/log/remastersys-installer.log
echo "live config listing" >> /var/log/remastersys-installer.log
echo "==============================================================" >> /var/log/remastersys-installer.log
cat /etc/live/config.conf >> /var/log/remastersys-installer.log
echo "==============================================================" >> /var/log/remastersys-installer.log
echo "End of Log" >> /var/log/remastersys-installer.log
echo "==============================================================" >> /var/log/remastersys-installer.log



# copy the live system to the hd
echo "Copying the live system to the hard drive now."
echo "This may take a while so please wait until completed."

            
if [ "$HFSTYPE" = "noformat" ]; then
rsync -a / /TARGET --ignore-existing --exclude=/{TARGET,home,live,cdrom,mnt,proc,run,sys,media}
else
rsync -a / /TARGET --ignore-existing --exclude=/{TARGET,live,cdrom,mnt,proc,run,sys,media}
fi

mkdir -p /TARGET/{proc,mnt,run,sys,media/cdrom}

#remove the live installer from the desktop of /etc/skel/Desktop
if [ -f /TARGET/etc/skel/Desktop/remastersys-installer.desktop -o -f /TARGET/etc/skel/Desktop/remastersys-installer-ked.desktop ]; then
rm -f /TARGET/etc/skel/Desktop/remastersys-installer*.desktop
fi

echo "Completed copying the files."
echo "Performing post-install steps now"


#prepare the chroot environment for some post install changes
mount -o bind /proc /TARGET/proc
mount -o bind /dev /TARGET/dev
mount -o bind /sys /TARGET/sys
rm -f /TARGET/etc/fstab
rm -f /TARGET/etc/profile.d/zz-live.sh


#create the new fstab
if [ "$HOMEPART" = "root" ]; then
cat > /TARGET/etc/fstab <<FOO

# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# /dev/$TARGETPART
/dev/$TARGETPART / $FSTYPE relatime,errors=remount-ro 0 1
# /dev/$SWAP
/dev/$SWAP none swap sw 0 0
# cdrom
$TARGETCDROM /media/cdrom udf,iso9660 user,noauto,exec,utf8 0 0

FOO

else

cat > /TARGET/etc/fstab <<FOO
# /etc/fstab: static file system information.
#
# <file system> <mount point>   <type>  <options>       <dump>  <pass>

proc /proc proc defaults 0 0
# /dev/$TARGETPART
/dev/$TARGETPART / $FSTYPE relatime,errors=remount-ro 0 1
# /dev/$HOMEPART home
/dev/$HOMEPART /home $HFSTYPE relatime 0 0
# /dev/$SWAP
/dev/$SWAP none swap sw 0 0
# cdrom
$TARGETCDROM /media/cdrom udf,iso9660 user,noauto,exec,utf8 0 0

FOO

fi


cat > /TARGET/bin/tempinstallerscript <<FOO
#!/bin/bash

echo -e "$TARGETROOTPASS\n$TARGETROOTPASS\n" | passwd root
userdel -f -r $LIVE_USERNAME
sed -i '/$LIVE_USERNAME/d' /etc/sudoers
groupadd -g 1000 $TARGETUSER
useradd -u 1000 -g 1000 -c "$TARGETUSERFULLNAME,,," -G $DEFAULTGROUPS -s /bin/bash -m $TARGETUSER
echo -e "$TARGETPASS\n$TARGETPASS\n" | passwd $TARGETUSER
dpkg-divert --remove --rename --quiet /usr/lib/update-notifier/apt-check
dpkg-divert --remove --rename --quiet /usr/sbin/update-initramfs
dpkg-divert --remove --rename --quiet /usr/sbin/anacron
update-initramfs -t -c -k $(/bin/uname -r)
shadowconfig on

FOO


else

#echo "$TARGETHOSTNAME" > /TARGET/etc/hostname
#echo "127.0.0.1 localhost" > /TARGET/etc/hosts
#echo "127.0.0.1 $TARGETHOSTNAME" >> /TARGET/etc/hosts
#touch /TARGET/etc/resolv.conf


cat > /TARGET/bin/tempinstallerscript <<FOO
#!/bin/bash

dpkg-divert --remove --rename --quiet /usr/lib/update-notifier/apt-check
dpkg-divert --remove --rename --quiet /usr/sbin/update-initramfs
dpkg-divert --remove --rename --quiet /usr/sbin/anacron
update-initramfs -t -c -k $(uname -r)
for i in `ls -d /home/*`; do

if [ /$i/.config/Thunar/volmanrc ]; then
  sed -i -e 's/FALSE/TRUE/g' /$i/.config/Thunar/volmanrc
  cp -f /$i/.config/volmanrc /root/.config/Thunar/volmanrc
fi

done

FOO


fi

chmod 755 /TARGET/bin/tempinstallerscript
chroot /TARGET /bin/tempinstallerscript
rm /TARGET/bin/tempinstallerscript
if [ "$GUI" != "" ]; then
killall -KILL tail
fi
# Setup grub

cat > /tmp/Remastersys-Grub-Install << FOO
#!/bin/bash
chroot /TARGET grub-install --force --no-floppy "$GRUBLOC"
chroot /TARGET update-grub
exit 0
FOO

chmod +x /tmp/Remastersys-Grub-Install

if [ "$GUI" != "" ]; then
progressbar "Installing and setting up grub...Please Wait\n" &
xterm -e /tmp/Remastersys-Grub-Install
sleep 1
rm -rf /tmp/Remastersys-Grub-Install
else
echo "Installing and setting up grub."
/tmp/Remastersys-Grub-Install
sleep 1
rm -rf /tmp/Remastersys-Grub-Install
fi

echo "Post-install has completed."
echo
echo "Unmounting the TARGET partition."
sleep 1
umount /TARGET/proc
sleep 1
umount /TARGET/dev
sleep 1
umount /TARGET/sys
sleep 1
umount /TARGET/home
sleep 1
umount /TARGET
sleep 1

if [ "$GUI" != "" ]; then
killall -KILL tail
fi


$DIALOG $TITLE"$TITLETEXT" $YESNO $TEXT"Installation is complete.\n\nIf everything went well you should have your new system installed and ready.\n\nDo you want to reboot now to try it out?" $HEIGHT $WIDTH

if [ $? != 0 ]; then
exit 0
else
reboot
fi