inferno0230
diff --git a/‎Documentation/admin-guide/kernel-parameters.txt‎
Lines changed: 2 additions & 0 deletions b/‎Documentation/admin-guide/kernel-parameters.txt‎
Lines changed: 2 additions & 0 deletions
diff --git a/‎Documentation/driver-api/serial/driver.rst‎
Lines changed: 1 addition & 1 deletion b/‎Documentation/driver-api/serial/driver.rst‎
Lines changed: 1 addition & 1 deletion
diff --git a/‎Documentation/hwmon/dell-smm-hwmon.rst‎
Lines changed: 7 additions & 7 deletions b/‎Documentation/hwmon/dell-smm-hwmon.rst‎
Lines changed: 7 additions & 7 deletions
diff --git a/‎Makefile‎
Lines changed: 13 additions & 1 deletion b/‎Makefile‎
Lines changed: 13 additions & 1 deletion
diff --git a/‎arch/arm/boot/dts/tegra114.dtsi‎
Lines changed: 1 addition & 1 deletion b/‎arch/arm/boot/dts/tegra114.dtsi‎
Lines changed: 1 addition & 1 deletion
diff --git a/‎arch/arm/mach-at91/pm.c‎
Lines changed: 11 additions & 10 deletions b/‎arch/arm/mach-at91/pm.c‎
Lines changed: 11 additions & 10 deletions
diff --git a/‎arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts‎
Lines changed: 19 additions & 19 deletions b/‎arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts‎
Lines changed: 19 additions & 19 deletions
diff --git a/‎arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts‎
Lines changed: 7 additions & 7 deletions b/‎arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts‎
Lines changed: 7 additions & 7 deletions
diff --git a/‎arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi‎
Lines changed: 11 additions & 11 deletions b/‎arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi‎
Lines changed: 11 additions & 11 deletions
diff --git a/‎arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi‎
Lines changed: 1 addition & 1 deletion b/‎arch/arm64/boot/dts/nvidia/tegra210-p2597.dtsi‎
Lines changed: 1 addition & 1 deletion
@@ -5780,6 +5780,8 @@
 
 			Selecting 'on' will also enable the mitigation
 			against user space to user space task attacks.
+			Selecting specific mitigation does not force enable
+			user mitigations.
 
 			Selecting 'off' will disable both the kernel and
 			the user space protections.
 
@@ -100,4 +100,4 @@ Some helpers are provided in order to set/get modem control lines via GPIO.
 .. kernel-doc:: drivers/tty/serial/serial_mctrl_gpio.c
    :identifiers: mctrl_gpio_init mctrl_gpio_free mctrl_gpio_to_gpiod
            mctrl_gpio_set mctrl_gpio_get mctrl_gpio_enable_ms
-           mctrl_gpio_disable_ms
+           mctrl_gpio_disable_ms_sync mctrl_gpio_disable_ms_no_sync
@@ -32,12 +32,12 @@ Temperature sensors and fans can be queried and set via the standard
 =============================== ======= =======================================
 Name				Perm	Description
 =============================== ======= =======================================
-fan[1-3]_input                  RO      Fan speed in RPM.
-fan[1-3]_label                  RO      Fan label.
-fan[1-3]_min                    RO      Minimal Fan speed in RPM
-fan[1-3]_max                    RO      Maximal Fan speed in RPM
-fan[1-3]_target                 RO      Expected Fan speed in RPM
-pwm[1-3]                        RW      Control the fan PWM duty-cycle.
+fan[1-4]_input                  RO      Fan speed in RPM.
+fan[1-4]_label                  RO      Fan label.
+fan[1-4]_min                    RO      Minimal Fan speed in RPM
+fan[1-4]_max                    RO      Maximal Fan speed in RPM
+fan[1-4]_target                 RO      Expected Fan speed in RPM
+pwm[1-4]                        RW      Control the fan PWM duty-cycle.
 pwm1_enable                     WO      Enable or disable automatic BIOS fan
                                         control (not supported on all laptops,
                                         see below for details).
@@ -93,7 +93,7 @@ Again, when you find new codes, we'd be happy to have your patches!
 ---------------------------
 
 The driver also exports the fans as thermal cooling devices with
-``type`` set to ``dell-smm-fan[1-3]``. This allows for easy fan control
+``type`` set to ``dell-smm-fan[1-4]``. This allows for easy fan control
 using one of the thermal governors.
 
 Module parameters
 
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: GPL-2.0
 VERSION = 6
 PATCHLEVEL = 1
-SUBLEVEL = 140
+SUBLEVEL = 141
 EXTRAVERSION =
 NAME = Curry Ramen
 
@@ -875,6 +875,18 @@ ifdef CONFIG_CC_IS_CLANG
 KBUILD_CPPFLAGS += -Qunused-arguments
 # The kernel builds with '-std=gnu11' so use of GNU extensions is acceptable.
 KBUILD_CFLAGS += -Wno-gnu
+
+# Clang may emit a warning when a const variable, such as the dummy variables
+# in typecheck(), or const member of an aggregate type are not initialized,
+# which can result in unexpected behavior. However, in many audited cases of
+# the "field" variant of the warning, this is intentional because the field is
+# never used within a particular call path, the field is within a union with
+# other non-const members, or the containing object is not const so the field
+# can be modified via memcpy() / memset(). While the variable warning also gets
+# disabled with this same switch, there should not be too much coverage lost
+# because -Wuninitialized will still flag when an uninitialized const variable
+# is used.
+KBUILD_CFLAGS += $(call cc-disable-warning, default-const-init-unsafe)
 else
 
 # gcc inanely warns about local variables called 'main'
 
@@ -139,7 +139,7 @@
 			reg = <0x54400000 0x00040000>;
 			clocks = <&tegra_car TEGRA114_CLK_DSIB>,
 				 <&tegra_car TEGRA114_CLK_DSIBLP>,
-				 <&tegra_car TEGRA114_CLK_PLL_D2_OUT0>;
+				 <&tegra_car TEGRA114_CLK_PLL_D_OUT0>;
 			clock-names = "dsi", "lp", "parent";
 			resets = <&tegra_car 82>;
 			reset-names = "dsi";
 
@@ -537,11 +537,12 @@ extern u32 at91_pm_suspend_in_sram_sz;
 
 static int at91_suspend_finish(unsigned long val)
 {
-	unsigned char modified_gray_code[] = {
-		0x00, 0x01, 0x02, 0x03, 0x06, 0x07, 0x04, 0x05, 0x0c, 0x0d,
-		0x0e, 0x0f, 0x0a, 0x0b, 0x08, 0x09, 0x18, 0x19, 0x1a, 0x1b,
-		0x1e, 0x1f, 0x1c, 0x1d, 0x14, 0x15, 0x16, 0x17, 0x12, 0x13,
-		0x10, 0x11,
+	/* SYNOPSYS workaround to fix a bug in the calibration logic */
+	unsigned char modified_fix_code[] = {
+		0x00, 0x01, 0x01, 0x06, 0x07, 0x0c, 0x06, 0x07, 0x0b, 0x18,
+		0x0a, 0x0b, 0x0c, 0x0d, 0x0d, 0x0a, 0x13, 0x13, 0x12, 0x13,
+		0x14, 0x15, 0x15, 0x12, 0x18, 0x19, 0x19, 0x1e, 0x1f, 0x14,
+		0x1e, 0x1f,
 	};
 	unsigned int tmp, index;
 	int i;
@@ -552,25 +553,25 @@ static int at91_suspend_finish(unsigned long val)
 		 * restore the ZQ0SR0 with the value saved here. But the
 		 * calibration is buggy and restoring some values from ZQ0SR0
 		 * is forbidden and risky thus we need to provide processed
-		 * values for these (modified gray code values).
+		 * values for these.
 		 */
 		tmp = readl(soc_pm.data.ramc_phy + DDR3PHY_ZQ0SR0);
 
 		/* Store pull-down output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] = modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] = modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDO_OFF;
 
 		/* Store pull-up output impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PUO_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PUO_OFF;
 
 		/* Store pull-down on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SR0_PDODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SR0_PDODT_OFF;
 
 		/* Store pull-up on-die termination impedance select. */
 		index = (tmp >> DDR3PHY_ZQ0SRO_PUODT_OFF) & 0x1f;
-		soc_pm.bu->ddr_phy_calibration[0] |= modified_gray_code[index];
+		soc_pm.bu->ddr_phy_calibration[0] |= modified_fix_code[index] << DDR3PHY_ZQ0SRO_PUODT_OFF;
 
 		/*
 		 * The 1st 8 words of memory might get corrupted in the process
 
@@ -151,28 +151,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -290,6 +274,22 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spdif_tx_pin>;
 
@@ -175,16 +175,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -295,6 +291,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
 
@@ -112,20 +112,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -240,6 +232,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };
 
@@ -1631,7 +1631,7 @@
 		regulator-min-microvolt = <1800000>;
 		regulator-max-microvolt = <1800000>;
 		regulator-always-on;
-		gpio = <&exp1 14 GPIO_ACTIVE_HIGH>;
+		gpio = <&exp1 9 GPIO_ACTIVE_HIGH>;
 		enable-active-high;
 		vin-supply = <&vdd_1v8>;
 	};