Merge branch 'for-6.11/trivial' into for-linus

Couple of trivial fixes:
- extra semicolon (Chen Ni)
- typo (Thorsten Blum)

Author: Benjamin Tissoires

.mailmap

@@ -337,10 +337,11 @@ Kalyan Thota <[email protected]> <[email protected]>
 Karthikeyan Periyasamy <[email protected]> <[email protected]>
 Kathiravan T <[email protected]> <[email protected]>
 Kay Sievers <[email protected]>
-Kees Cook <[email protected]> <[email protected]>
-Kees Cook <[email protected]> <[email protected]>
-Kees Cook <[email protected]> <[email protected]>
-Kees Cook <[email protected]> <[email protected]>
+Kees Cook <[email protected]> <[email protected]>
+Kees Cook <[email protected]> <[email protected]>
+Kees Cook <[email protected]> <[email protected]>
+Kees Cook <[email protected]> <[email protected]>
+Kees Cook <[email protected]> <[email protected]>
 Keith Busch <[email protected]> <[email protected]>
 Keith Busch <[email protected]> <[email protected]>
 Kenneth W Chen <[email protected]>
@@ -572,7 +573,7 @@ Sarangdhar Joshi <[email protected]>
 Sascha Hauer <[email protected]>
 Sahitya Tummala <[email protected]> <[email protected]>
 Sathishkumar Muruganandam <[email protected]> <[email protected]>
-Satya Priya <[email protected]> <[email protected]>
+Satya Priya <[email protected]> <[email protected]> <[email protected]>
 S.Çağlar Onur <[email protected]>
 Sayali Lokhande <[email protected]> <[email protected]>
 Sean Christopherson <[email protected]> <[email protected]>

Documentation/ABI/stable/sysfs-bus-mhi

@@ -29,3 +29,16 @@ Description:	Initiates a SoC reset on the MHI controller.  A SoC reset is
                 This can be useful as a method of recovery if the device is
                 non-responsive, or as a means of loading new firmware as a
                 system administration task.
+
+What:           /sys/bus/mhi/devices/.../trigger_edl
+Date:           April 2024
+KernelVersion:  6.10
+Contact:        [email protected]
+Description:    Writing a non-zero value to this file will force devices to
+                enter EDL (Emergency Download) mode. This entry only exists for
+                devices capable of entering the EDL mode using the standard EDL
+                triggering mechanism defined in the MHI spec v1.2. Once in EDL
+                mode, the flash programmer image can be downloaded to the
+                device to enter the flash programmer execution environment.
+                This can be useful if user wants to use QDL (Qualcomm Download,
+                which is used to download firmware over EDL) to update firmware.

Documentation/ABI/testing/sysfs-bus-coresight-devices-etm3x

@@ -22,7 +22,7 @@ Contact:	Mathieu Poirier <[email protected]>
 Description:	(RW) Used in conjunction with @addr_idx.  Specifies
 		characteristics about the address comparator being configure,
 		for example the access type, the kind of instruction to trace,
-		processor contect ID to trigger on, etc.  Individual fields in
+		processor context ID to trigger on, etc.  Individual fields in
 		the access type register may vary on the version of the trace
 		entity.
 

Documentation/ABI/testing/sysfs-bus-coresight-devices-tmc

@@ -97,7 +97,7 @@ Date:		August 2023
 KernelVersion:	6.7
 Contact:	Anshuman Khandual <[email protected]>
 Description:	(Read) Shows all supported Coresight TMC-ETR buffer modes available
-		for the users to configure explicitly. This file is avaialble only
+		for the users to configure explicitly. This file is available only
 		for TMC ETR devices.
 
 What:		/sys/bus/coresight/devices/<memory_map>.tmc/buf_mode_preferred

Documentation/ABI/testing/sysfs-bus-coresight-devices-tpdm

@@ -244,7 +244,7 @@ KernelVersion	6.9
 Contact:	Jinlong Mao (QUIC) <[email protected]>, Tao Zhang (QUIC) <[email protected]>
 Description:
 		(RW) Read or write the status of timestamp upon all interface.
-		Only value 0 and 1  can be written to this node. Set this node to 1 to requeset
+		Only value 0 and 1  can be written to this node. Set this node to 1 to request
 		timestamp to all trace packet.
 		Accepts only one of the 2 values -  0 or 1.
 		0 : Disable the timestamp of all trace packets.

Documentation/ABI/testing/sysfs-bus-event_source-devices-events

@@ -37,6 +37,12 @@ Description:	Per-pmu performance monitoring events specific to the running syste
 		performance monitoring event supported by the <pmu>. The name
 		of the file is the name of the event.
 
+		As performance monitoring event names are case
+		insensitive in the perf tool, the perf tool only looks
+		for lower or upper case event names in sysfs to avoid
+		scanning the directory. It is therefore required the
+		name of the event here is either lower or upper case.
+
 		File contents:
 
 			<term>[=<value>][,<term>[=<value>]]...

Documentation/ABI/testing/sysfs-devices-hisi_ptt renamed to Documentation/ABI/testing/sysfs-bus-event_source-devices-hisi_ptt

@@ -1,4 +1,4 @@
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -8,7 +8,7 @@ Description:	This directory contains files for tuning the PCIe link
 
 		See Documentation/trace/hisi-ptt.rst for more information.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_cpl
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -18,7 +18,7 @@ Description:	(RW) Controls the weight of Tx completion TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_np
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -28,7 +28,7 @@ Description:	(RW) Controls the weight of Tx non-posted TLPs, which influence
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/qos_tx_p
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -38,7 +38,7 @@ Description:	(RW) Controls the weight of Tx posted TLPs, which influence the
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/rx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>
@@ -49,7 +49,7 @@ Description:	(RW) Control the allocated buffer watermark for inbound packets.
 		will return an error, and out of range values will be converted
 		to 2. The value indicates a probable level of the event.
 
-What:		/sys/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
+What:		/sys/bus/event_source/devices/hisi_ptt<sicl_id>_<core_id>/tune/tx_alloc_buf_level
 Date:		October 2022
 KernelVersion:	6.1
 Contact:	Yicong Yang <[email protected]>

Documentation/ABI/testing/sysfs-bus-iio

@@ -243,7 +243,8 @@ Description:
 		less measurements. Units after application of scale and offset
 		are milli degrees Celsius.
 
-What:		/sys/bus/iio/devices/iio:deviceX/in_tempX_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_tempY_input
+What:		/sys/bus/iio/devices/iio:deviceX/in_temp_input
 KernelVersion:	2.6.38
 Contact:	[email protected]
 Description:

Documentation/ABI/testing/sysfs-bus-iio-ad9739a

@@ -0,0 +1,19 @@
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode
+KernelVersion:	6.9
+Contact:	[email protected]
+Description:
+		DAC operating mode. One of the following modes can be selected:
+
+		* normal: This is DAC normal mode.
+		* mixed-mode: In this mode the output is effectively chopped at
+			      the DAC sample rate. This has the effect of
+			      reducing the power of the fundamental signal while
+			      increasing the power of the images centered around
+			      the DAC sample rate, thus improving the output
+			      power of these images.
+
+What:		/sys/bus/iio/devices/iio:deviceX/out_voltageY_operating_mode_available
+KernelVersion:	6.9
+Contact:	[email protected]
+Description:
+		Available operating modes.

Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-hub renamed to Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-dev

@@ -5,4 +5,5 @@ Contact:	Matthias Kaehlcke <[email protected]>
 		[email protected]
 Description:
 		(RW) Controls whether the USB hub remains always powered
-		during system suspend or not.
+		during system suspend or not. This attribute is not
+		available for non-hub devices.