Merge tag 'sunxi-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux into arm/fixes

Allwinner fixes for 6.15

Only one fix:

Switch back to I2C for PMICs on Allwinner H6 devices. Apparently using
Allwinner's proprietary bus ended up causing issues when the PMIC was
sharing the bus with other devices.

* tag 'sunxi-fixes-for-6.15' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
  Revert "arm64: dts: allwinner: h6: Use RSB for AXP805 PMIC connection"

Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Arnd Bergmann <[email protected]>

Author: arndb

arch/arm64/boot/dts/allwinner/sun50i-h6-beelink-gs1.dts

@@ -152,28 +152,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	linux,rc-map-name = "rc-beelink-gs1";
-	status = "okay";
-};
-
-&r_pio {
-	/*
-	 * FIXME: We can't add that supply for now since it would
-	 * create a circular dependency between pinctrl, the regulator
-	 * and the RSB Bus.
-	 *
-	 * vcc-pl-supply = <&reg_aldo1>;
-	 */
-	vcc-pm-supply = <&reg_aldo1>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -291,6 +275,22 @@
 	};
 };
 
+&r_ir {
+	linux,rc-map-name = "rc-beelink-gs1";
+	status = "okay";
+};
+
+&r_pio {
+	/*
+	 * PL0 and PL1 are used for PMIC I2C
+	 * don't enable the pl-supply else
+	 * it will fail at boot
+	 *
+	 * vcc-pl-supply = <&reg_aldo1>;
+	 */
+	vcc-pm-supply = <&reg_aldo1>;
+};
+
 &spdif {
 	pinctrl-names = "default";
 	pinctrl-0 = <&spdif_tx_pin>;

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi-3.dts

@@ -176,16 +176,12 @@
 	vcc-pg-supply = <&reg_vcc_wifi_io>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -296,6 +292,10 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };

arch/arm64/boot/dts/allwinner/sun50i-h6-orangepi.dtsi

@@ -113,20 +113,12 @@
 	vcc-pg-supply = <&reg_aldo1>;
 };
 
-&r_ir {
-	status = "okay";
-};
-
-&r_pio {
-	vcc-pm-supply = <&reg_bldo3>;
-};
-
-&r_rsb {
+&r_i2c {
 	status = "okay";
 
-	axp805: pmic@745 {
+	axp805: pmic@36 {
 		compatible = "x-powers,axp805", "x-powers,axp806";
-		reg = <0x745>;
+		reg = <0x36>;
 		interrupt-parent = <&r_intc>;
 		interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
 		interrupt-controller;
@@ -241,6 +233,14 @@
 	};
 };
 
+&r_ir {
+	status = "okay";
+};
+
+&r_pio {
+	vcc-pm-supply = <&reg_bldo3>;
+};
+
 &rtc {
 	clocks = <&ext_osc32k>;
 };