Merge tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty

Pull tty/serial driver fixes from Greg KH:
 "Here are five small serial and tty and vt fixes for 6.16-rc4. Included
  in here are:

   - kerneldoc fixes for recent vt changes

   - imx serial driver fix

   - of_node sysfs fix for a regression

   - vt missing notification fix

   - 8250 dt bindings fix

  All of these have been in linux-next for a while with no reported issues"

* tag 'tty-6.16-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
  dt-bindings: serial: 8250: Make clocks and clock-frequency exclusive
  serial: imx: Restore original RXTL for console to fix data loss
  serial: core: restore of_node information in sysfs
  vt: fix kernel-doc warnings in ucs_get_fallback()
  vt: add missing notification when switching back to text mode

Author: torvalds

Documentation/devicetree/bindings/serial/8250.yaml

@@ -45,7 +45,7 @@ allOf:
                   - ns16550
                   - ns16550a
     then:
-      anyOf:
+      oneOf:
         - required: [ clock-frequency ]
         - required: [ clocks ]
 

drivers/tty/serial/imx.c

@@ -235,6 +235,7 @@ struct imx_port {
 	enum imx_tx_state	tx_state;
 	struct hrtimer		trigger_start_tx;
 	struct hrtimer		trigger_stop_tx;
+	unsigned int		rxtl;
 };
 
 struct imx_port_ucrs {
@@ -1339,6 +1340,7 @@ static void imx_uart_clear_rx_errors(struct imx_port *sport)
 
 #define TXTL_DEFAULT 8
 #define RXTL_DEFAULT 8 /* 8 characters or aging timer */
+#define RXTL_CONSOLE_DEFAULT 1
 #define TXTL_DMA 8 /* DMA burst setting */
 #define RXTL_DMA 9 /* DMA burst setting */
 
@@ -1457,7 +1459,7 @@ static void imx_uart_disable_dma(struct imx_port *sport)
 	ucr1 &= ~(UCR1_RXDMAEN | UCR1_TXDMAEN | UCR1_ATDMAEN);
 	imx_uart_writel(sport, ucr1, UCR1);
 
-	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
+	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl);
 
 	sport->dma_is_enabled = 0;
 }
@@ -1482,7 +1484,12 @@ static int imx_uart_startup(struct uart_port *port)
 		return retval;
 	}
 
-	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
+	if (uart_console(&sport->port))
+		sport->rxtl = RXTL_CONSOLE_DEFAULT;
+	else
+		sport->rxtl = RXTL_DEFAULT;
+
+	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl);
 
 	/* disable the DREN bit (Data Ready interrupt enable) before
 	 * requesting IRQs
@@ -1948,7 +1955,7 @@ static int imx_uart_poll_init(struct uart_port *port)
 	if (retval)
 		clk_disable_unprepare(sport->clk_ipg);
 
-	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
+	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl);
 
 	uart_port_lock_irqsave(&sport->port, &flags);
 
@@ -2040,7 +2047,7 @@ static int imx_uart_rs485_config(struct uart_port *port, struct ktermios *termio
 		/* If the receiver trigger is 0, set it to a default value */
 		ufcr = imx_uart_readl(sport, UFCR);
 		if ((ufcr & UFCR_RXTL_MASK) == 0)
-			imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
+			imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl);
 		imx_uart_start_rx(port);
 	}
 
@@ -2302,7 +2309,7 @@ imx_uart_console_setup(struct console *co, char *options)
 	else
 		imx_uart_console_get_options(sport, &baud, &parity, &bits);
 
-	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, RXTL_DEFAULT);
+	imx_uart_setup_ufcr(sport, TXTL_DEFAULT, sport->rxtl);
 
 	retval = uart_set_options(&sport->port, co, baud, parity, bits, flow);
 

drivers/tty/serial/serial_base_bus.c

@@ -72,6 +72,7 @@ static int serial_base_device_init(struct uart_port *port,
 	dev->parent = parent_dev;
 	dev->bus = &serial_base_bus_type;
 	dev->release = release;
+	device_set_of_node_from_dev(dev, parent_dev);
 
 	if (!serial_base_initialized) {
 		dev_dbg(port->dev, "uart_add_one_port() called before arch_initcall()?\n");

drivers/tty/vt/ucs.c

@@ -206,7 +206,7 @@ static int ucs_page_entry_cmp(const void *key, const void *element)
 
 /**
  * ucs_get_fallback() - Get a substitution for the provided Unicode character
- * @base: Base Unicode code point (UCS-4)
+ * @cp: Unicode code point (UCS-4)
  *
  * Get a simpler fallback character for the provided Unicode character.
  * This is used for terminal display when corresponding glyph is unavailable.

drivers/tty/vt/vt.c

@@ -4650,6 +4650,7 @@ void do_unblank_screen(int leaving_gfx)
 	set_palette(vc);
 	set_cursor(vc);
 	vt_event_post(VT_EVENT_UNBLANK, vc->vc_num, vc->vc_num);
+	notify_update(vc);
 }
 EXPORT_SYMBOL(do_unblank_screen);