i2c: tegra: check msg length in SMBUS block read

For SMBUS block read, do not continue to read if the message length
passed from the device is '0' or greater than the maximum allowed bytes.

Signed-off-by: Akhil R <[email protected]>
Acked-by: Thierry Reding <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Andi Shyti <[email protected]>

Author: Akhil R

drivers/i2c/busses/i2c-tegra.c

@@ -1395,6 +1395,11 @@ static int tegra_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msgs[],
 			ret = tegra_i2c_xfer_msg(i2c_dev, &msgs[i], MSG_END_CONTINUE);
 			if (ret)
 				break;
+
+			/* Validate message length before proceeding */
+			if (msgs[i].buf[0] == 0 || msgs[i].buf[0] > I2C_SMBUS_BLOCK_MAX)
+				break;
+
 			/* Set the msg length from first byte */
 			msgs[i].len += msgs[i].buf[0];
 			dev_dbg(i2c_dev->dev, "reading %d bytes\n", msgs[i].len);