tgupdate: merge t/DO-NOT-MERGE-mptcp-enabled-by-default base into t/DO-NOT-MERGE-mptcp-enabled-by-default

Author: matttbe

.gitignore

@@ -129,6 +129,7 @@ series
 
 # ctags files
 tags
+!tags/
 TAGS
 
 # cscope files

Documentation/ABI/testing/configfs-usb-gadget-uvc

@@ -342,6 +342,70 @@ Description:	Specific uncompressed frame descriptors
 					   support
 		=========================  =====================================
 
+What:           /config/usb-gadget/gadget/functions/uvc.name/streaming/framebased
+Date:           Sept 2024
+KernelVersion:  5.15
+Description:    Framebased format descriptors
+
+What:           /config/usb-gadget/gadget/functions/uvc.name/streaming/framebased/name
+Date:           Sept 2024
+KernelVersion:  5.15
+Description:    Specific framebased format descriptors
+
+                ==================      =======================================
+                bFormatIndex            unique id for this format descriptor;
+                                        only defined after parent header is
+                                        linked into the streaming class;
+                                        read-only
+                bmaControls             this format's data for bmaControls in
+                                        the streaming header
+                bmInterlaceFlags        specifies interlace information,
+                                        read-only
+                bAspectRatioY           the X dimension of the picture aspect
+                                        ratio, read-only
+                bAspectRatioX           the Y dimension of the picture aspect
+                                        ratio, read-only
+                bDefaultFrameIndex      optimum frame index for this stream
+                bBitsPerPixel           number of bits per pixel used to
+                                        specify color in the decoded video
+                                        frame
+                guidFormat              globally unique id used to identify
+                                        stream-encoding format
+                ==================      =======================================
+
+What:           /config/usb-gadget/gadget/functions/uvc.name/streaming/framebased/name/name
+Date:           Sept 2024
+KernelVersion:  5.15
+Description:    Specific framebased frame descriptors
+
+                =========================  =====================================
+                bFrameIndex                unique id for this framedescriptor;
+                                           only defined after parent format is
+                                           linked into the streaming header;
+                                           read-only
+                dwFrameInterval            indicates how frame interval can be
+                                           programmed; a number of values
+                                           separated by newline can be specified
+                dwDefaultFrameInterval     the frame interval the device would
+                                           like to use as default
+                dwBytesPerLine             Specifies the number of bytes per line
+                                           of video for packed fixed frame size
+                                           formats, allowing the receiver to
+                                           perform stride alignment of the video.
+                                           If the bVariableSize value (above) is
+                                           TRUE (1), or if the format does not
+                                           permit such alignment, this value shall
+                                           be set to zero (0).
+                dwMaxBitRate               the maximum bit rate at the shortest
+                                           frame interval in bps
+                dwMinBitRate               the minimum bit rate at the longest
+                                           frame interval in bps
+                wHeight                    height of decoded bitmap frame in px
+                wWidth                     width of decoded bitmam frame in px
+                bmCapabilities             still image support, fixed frame-rate
+                                           support
+                =========================  =====================================
+
 What:		/config/usb-gadget/gadget/functions/uvc.name/streaming/header
 Date:		Dec 2014
 KernelVersion:	4.0

Documentation/ABI/testing/sysfs-bus-event_source-devices-vpa-pmu

@@ -8,17 +8,18 @@ Description:    Read-only. Attribute group to describe the magic bits
                 Each attribute under this group defines a bit range of the
                 perf_event_attr.config. Supported attribute are listed
                 below::
-			event = "config:0-31" - event ID
 
-		For example::
+                  event = "config:0-31" - event ID
 
-		  l1_to_l2_lat = "event=0x1"
+                For example::
+
+                  l1_to_l2_lat = "event=0x1"
 
 What:           /sys/bus/event_source/devices/vpa_pmu/events
 Date:           November 2024
 Contact:        Linux on PowerPC Developer List <[email protected]>
-Description:	Read-only. Attribute group to describe performance monitoring
+Description:    Read-only. Attribute group to describe performance monitoring
                 events for the Virtual Processor Area events. Each attribute
-		in this group describes a single performance monitoring event
-		supported by vpa_pmu. The name of the file is the name of
-		the event (See ABI/testing/sysfs-bus-event_source-devices-events).
+                in this group describes a single performance monitoring event
+                supported by vpa_pmu. The name of the file is the name of
+                the event (See ABI/testing/sysfs-bus-event_source-devices-events).

Documentation/ABI/testing/sysfs-bus-iio

@@ -2268,6 +2268,30 @@ Description:
 		An example format is 16-bytes, 2-digits-per-byte, HEX-string
 		representing the sensor unique ID number.
 
+What:		/sys/bus/iio/devices/iio:deviceX/filter_type_available
+What:		/sys/bus/iio/devices/iio:deviceX/in_voltage-voltage_filter_mode_available
+KernelVersion:	6.1
+Contact:	[email protected]
+Description:
+		Reading returns a list with the possible filter modes. Options
+		for the attribute:
+
+		* "sinc3" - The digital sinc3 filter. Moderate 1st
+		  conversion time. Good noise performance.
+		* "sinc4" - Sinc 4. Excellent noise performance. Long
+		  1st conversion time.
+		* "sinc5" - The digital sinc5 filter. Excellent noise
+		  performance
+		* "sinc4+sinc1" - Sinc4 + averaging by 8. Low 1st conversion
+		  time.
+		* "sinc3+rej60" - Sinc3 + 60Hz rejection.
+		* "sinc3+sinc1" - Sinc3 + averaging by 8. Low 1st conversion
+		  time.
+		* "sinc3+pf1" - Sinc3 + device specific Post Filter 1.
+		* "sinc3+pf2" - Sinc3 + device specific Post Filter 2.
+		* "sinc3+pf3" - Sinc3 + device specific Post Filter 3.
+		* "sinc3+pf4" - Sinc3 + device specific Post Filter 4.
+
 What:		/sys/.../events/in_proximity_thresh_either_runningperiod
 KernelVersion:	6.6
 Contact:	[email protected]
@@ -2339,3 +2363,11 @@ KernelVersion:	6.10
 Contact:	[email protected]
 Description:
 		The value of current sense resistor in Ohms.
+
+What:		/sys/.../iio:deviceX/in_attention_input
+KernelVersion:	6.13
+Contact:	[email protected]
+Description:
+		Value representing the user's attention to the system expressed
+		in units as percentage. This usually means if the user is
+		looking at the screen or not.

Documentation/ABI/testing/sysfs-bus-iio-adc-ad4130

@@ -149,6 +149,19 @@ Description:
 		advertise to the partner. The currently used capabilities are in
 		brackets. Selection happens by writing to the file.
 
+What:		/sys/class/typec/<port>/usb_capability
+Date:		November 2024
+Contact:	Heikki Krogerus <[email protected]>
+Description:	Lists the supported USB Modes. The default USB mode that is used
+		next time with the Enter_USB Message is in brackets. The default
+		mode can be changed by writing to the file when supported by the
+		driver.
+
+		Valid values:
+		- usb2 (USB 2.0)
+		- usb3 (USB 3.2)
+		- usb4 (USB4)
+
 USB Type-C partner devices (eg. /sys/class/typec/port0-partner/)
 
 What:		/sys/class/typec/<port>-partner/accessory_mode
@@ -220,6 +233,20 @@ Description:
 		directory exists, it will have an attribute file for every VDO
 		in Discover Identity command result.
 
+What:		/sys/class/typec/<port>-partner/usb_mode
+Date:		November 2024
+Contact:	Heikki Krogerus <[email protected]>
+Description:	The USB Modes that the partner device supports. The active mode
+		is displayed in brackets. The active USB mode can be changed by
+		writing to this file when the port driver is able to send Data
+		Reset Message to the partner. That requires USB Power Delivery
+		contract between the partner and the port.
+
+		Valid values:
+		- usb2 (USB 2.0)
+		- usb3 (USB 3.2)
+		- usb4 (USB4)
+
 USB Type-C cable devices (eg. /sys/class/typec/port0-cable/)
 
 Note: Electronically Marked Cables will have a device also for one cable plug

Documentation/ABI/testing/sysfs-class-typec

@@ -76,7 +76,7 @@ Description:
 		timeout when the pretimeout interrupt is delivered.  Pretimeout
 		is an optional feature.
 
-What:		/sys/class/watchdog/watchdogn/pretimeout_avaialable_governors
+What:		/sys/class/watchdog/watchdogn/pretimeout_available_governors
 Date:		February 2017
 Contact:	Wim Van Sebroeck <[email protected]>
 Description:

Documentation/ABI/testing/sysfs-class-watchdog

@@ -18,8 +18,11 @@ set ``CONFIG_SECURITY_APPARMOR=y``
 
 If AppArmor should be selected as the default security module then set::
 
-   CONFIG_DEFAULT_SECURITY="apparmor"
-   CONFIG_SECURITY_APPARMOR_BOOTPARAM_VALUE=1
+   CONFIG_DEFAULT_SECURITY_APPARMOR=y
+
+The CONFIG_LSM parameter manages the order and selection of LSMs.
+Specify apparmor as the first "major" module (e.g. AppArmor, SELinux, Smack)
+in the list.
 
 Build the kernel
 

Documentation/admin-guide/LSM/apparmor.rst

@@ -258,6 +258,8 @@ stable kernels.
 | Hisilicon      | Hip{08,09,10,10C| #162001900      | N/A                         |
 |                | ,11} SMMU PMCG  |                 |                             |
 +----------------+-----------------+-----------------+-----------------------------+
+| Hisilicon      | Hip09           | #162100801      | HISILICON_ERRATUM_162100801 |
++----------------+-----------------+-----------------+-----------------------------+
 +----------------+-----------------+-----------------+-----------------------------+
 | Qualcomm Tech. | Kryo/Falkor v1  | E1003           | QCOM_FALKOR_ERRATUM_1003    |
 +----------------+-----------------+-----------------+-----------------------------+

Documentation/arch/arm64/silicon-errata.rst

@@ -896,10 +896,19 @@ Offset/size:	0x260/4
 
   The kernel runtime start address is determined by the following algorithm::
 
-	if (relocatable_kernel)
-	runtime_start = align_up(load_address, kernel_alignment)
-	else
-	runtime_start = pref_address
+   	if (relocatable_kernel) {
+   		if (load_address < pref_address)
+   			load_address = pref_address;
+   		runtime_start = align_up(load_address, kernel_alignment);
+   	} else {
+   		runtime_start = pref_address;
+   	}
+
+Hence the necessary memory window location and size can be estimated by
+a boot loader as::
+
+   	memory_window_start = runtime_start;
+   	memory_window_size = init_size;
 
 ============	===============
 Field name:	handover_offset