Standalone 3D scan with Microsoft Surface 2 GO

[vibrgr]

Hello,
I'm building a standalone 3D scan :

• Orbbec Astra 2
• LED panel
• Xiaomi 212W HyperCharge 25000mAh power bank
• RIG

And I need a computer and a screen to capture data from the Orbbec. I was planning on using a 10" touchscreen with a NUC. But I was wondering if I could make it more compact.
Could the Microsoft Surface 2 GO tablet run and properly support rtabmap in this setup?

https://support.microsoft.com/en-us/surface/surface-go-2-specs-and-features-0fc6a657-2851-484f-6f82-bd3c589ed92c

[matlabbe]

I don't have experience with a Microsoft surface, so difficult to say how "properly" it would work on it. Rendering quality can be always decreased while recording to save some computation, the most important part is how fast visual odometry can be computed. As long as the orbbec driver can correctly sync RGB and depth frames together, at worst you have to move/rotate slower if VO cannot run fast to avoid getting lost.

[vibrgr]

Thanks for your reply!
I'll give it a try on a Surface GO 3 with an Intel i3 processor. I'll let you know how it goes.