Merge tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc

Pull MMC fixes from Ulf Hansson:
 "MMC core:
   - Fix CQE error recovery path

  MMC host:
   - cqhci: Fix CQE error recovery path
   - sdhci-pci-gli: Fix initialization of LPM
   - sdhci-sprd: Fix enabling/disabling of the vqmmc regulator"

* tag 'mmc-v6.7-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
  mmc: sdhci-sprd: Fix vqmmc not shutting down after the card was pulled
  mmc: sdhci-pci-gli: Disable LPM during initialization
  mmc: cqhci: Fix task clearing in CQE error recovery
  mmc: cqhci: Warn of halt or task clear failure
  mmc: block: Retry commands in CQE error recovery
  mmc: block: Be sure to wait while busy in CQE error recovery
  mmc: cqhci: Increase recovery halt timeout
  mmc: block: Do not lose cache flush during CQE error recovery

Author: torvalds

drivers/mmc/core/block.c

@@ -1482,6 +1482,8 @@ static void mmc_blk_cqe_complete_rq(struct mmc_queue *mq, struct request *req)
 			blk_mq_requeue_request(req, true);
 		else
 			__blk_mq_end_request(req, BLK_STS_OK);
+	} else if (mq->in_recovery) {
+		blk_mq_requeue_request(req, true);
 	} else {
 		blk_mq_end_request(req, BLK_STS_OK);
 	}

drivers/mmc/core/core.c

@@ -551,18 +551,23 @@ int mmc_cqe_recovery(struct mmc_host *host)
 	cmd.flags        = MMC_RSP_R1B | MMC_CMD_AC;
 	cmd.flags       &= ~MMC_RSP_CRC; /* Ignore CRC */
 	cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT;
-	mmc_wait_for_cmd(host, &cmd, 0);
+	mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+
+	mmc_poll_for_busy(host->card, MMC_CQE_RECOVERY_TIMEOUT, true, MMC_BUSY_IO);
 
 	memset(&cmd, 0, sizeof(cmd));
 	cmd.opcode       = MMC_CMDQ_TASK_MGMT;
 	cmd.arg          = 1; /* Discard entire queue */
 	cmd.flags        = MMC_RSP_R1B | MMC_CMD_AC;
 	cmd.flags       &= ~MMC_RSP_CRC; /* Ignore CRC */
 	cmd.busy_timeout = MMC_CQE_RECOVERY_TIMEOUT;
-	err = mmc_wait_for_cmd(host, &cmd, 0);
+	err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
 
 	host->cqe_ops->cqe_recovery_finish(host);
 
+	if (err)
+		err = mmc_wait_for_cmd(host, &cmd, MMC_CMD_RETRIES);
+
 	mmc_retune_release(host);
 
 	return err;

drivers/mmc/host/cqhci-core.c

@@ -942,8 +942,8 @@ static bool cqhci_clear_all_tasks(struct mmc_host *mmc, unsigned int timeout)
 	ret = cqhci_tasks_cleared(cq_host);
 
 	if (!ret)
-		pr_debug("%s: cqhci: Failed to clear tasks\n",
-			 mmc_hostname(mmc));
+		pr_warn("%s: cqhci: Failed to clear tasks\n",
+			mmc_hostname(mmc));
 
 	return ret;
 }
@@ -976,18 +976,18 @@ static bool cqhci_halt(struct mmc_host *mmc, unsigned int timeout)
 	ret = cqhci_halted(cq_host);
 
 	if (!ret)
-		pr_debug("%s: cqhci: Failed to halt\n", mmc_hostname(mmc));
+		pr_warn("%s: cqhci: Failed to halt\n", mmc_hostname(mmc));
 
 	return ret;
 }
 
 /*
  * After halting we expect to be able to use the command line. We interpret the
  * failure to halt to mean the data lines might still be in use (and the upper
- * layers will need to send a STOP command), so we set the timeout based on a
- * generous command timeout.
+ * layers will need to send a STOP command), however failing to halt complicates
+ * the recovery, so set a timeout that would reasonably allow I/O to complete.
  */
-#define CQHCI_START_HALT_TIMEOUT	5
+#define CQHCI_START_HALT_TIMEOUT	500
 
 static void cqhci_recovery_start(struct mmc_host *mmc)
 {
@@ -1075,28 +1075,28 @@ static void cqhci_recovery_finish(struct mmc_host *mmc)
 
 	ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT);
 
-	if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT))
-		ok = false;
-
 	/*
 	 * The specification contradicts itself, by saying that tasks cannot be
 	 * cleared if CQHCI does not halt, but if CQHCI does not halt, it should
 	 * be disabled/re-enabled, but not to disable before clearing tasks.
 	 * Have a go anyway.
 	 */
-	if (!ok) {
-		pr_debug("%s: cqhci: disable / re-enable\n", mmc_hostname(mmc));
-		cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
-		cqcfg &= ~CQHCI_ENABLE;
-		cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
-		cqcfg |= CQHCI_ENABLE;
-		cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
-		/* Be sure that there are no tasks */
-		ok = cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT);
-		if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT))
-			ok = false;
-		WARN_ON(!ok);
-	}
+	if (!cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT))
+		ok = false;
+
+	/* Disable to make sure tasks really are cleared */
+	cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
+	cqcfg &= ~CQHCI_ENABLE;
+	cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
+
+	cqcfg = cqhci_readl(cq_host, CQHCI_CFG);
+	cqcfg |= CQHCI_ENABLE;
+	cqhci_writel(cq_host, cqcfg, CQHCI_CFG);
+
+	cqhci_halt(mmc, CQHCI_FINISH_HALT_TIMEOUT);
+
+	if (!ok)
+		cqhci_clear_all_tasks(mmc, CQHCI_CLEAR_TIMEOUT);
 
 	cqhci_recover_mrqs(cq_host);
 

drivers/mmc/host/sdhci-pci-gli.c

@@ -1189,6 +1189,32 @@ static void gl9763e_hs400_enhanced_strobe(struct mmc_host *mmc,
 	sdhci_writel(host, val, SDHCI_GLI_9763E_HS400_ES_REG);
 }
 
+static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot,
+					      bool enable)
+{
+	struct pci_dev *pdev = slot->chip->pdev;
+	u32 value;
+
+	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
+	value &= ~GLI_9763E_VHS_REV;
+	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
+	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
+
+	if (enable)
+		value &= ~GLI_9763E_CFG_LPSN_DIS;
+	else
+		value |= GLI_9763E_CFG_LPSN_DIS;
+
+	pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
+
+	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
+	value &= ~GLI_9763E_VHS_REV;
+	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
+	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
+}
+
 static void sdhci_set_gl9763e_signaling(struct sdhci_host *host,
 					unsigned int timing)
 {
@@ -1297,6 +1323,9 @@ static int gl9763e_add_host(struct sdhci_pci_slot *slot)
 	if (ret)
 		goto cleanup;
 
+	/* Disable LPM negotiation to avoid entering L1 state. */
+	gl9763e_set_low_power_negotiation(slot, false);
+
 	return 0;
 
 cleanup:
@@ -1340,31 +1369,6 @@ static void gli_set_gl9763e(struct sdhci_pci_slot *slot)
 }
 
 #ifdef CONFIG_PM
-static void gl9763e_set_low_power_negotiation(struct sdhci_pci_slot *slot, bool enable)
-{
-	struct pci_dev *pdev = slot->chip->pdev;
-	u32 value;
-
-	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
-	value &= ~GLI_9763E_VHS_REV;
-	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_W);
-	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
-
-	pci_read_config_dword(pdev, PCIE_GLI_9763E_CFG, &value);
-
-	if (enable)
-		value &= ~GLI_9763E_CFG_LPSN_DIS;
-	else
-		value |= GLI_9763E_CFG_LPSN_DIS;
-
-	pci_write_config_dword(pdev, PCIE_GLI_9763E_CFG, value);
-
-	pci_read_config_dword(pdev, PCIE_GLI_9763E_VHS, &value);
-	value &= ~GLI_9763E_VHS_REV;
-	value |= FIELD_PREP(GLI_9763E_VHS_REV, GLI_9763E_VHS_REV_R);
-	pci_write_config_dword(pdev, PCIE_GLI_9763E_VHS, value);
-}
-
 static int gl9763e_runtime_suspend(struct sdhci_pci_chip *chip)
 {
 	struct sdhci_pci_slot *slot = chip->slots[0];

drivers/mmc/host/sdhci-sprd.c

@@ -416,12 +416,33 @@ static void sdhci_sprd_request_done(struct sdhci_host *host,
 	mmc_request_done(host->mmc, mrq);
 }
 
+static void sdhci_sprd_set_power(struct sdhci_host *host, unsigned char mode,
+				 unsigned short vdd)
+{
+	struct mmc_host *mmc = host->mmc;
+
+	switch (mode) {
+	case MMC_POWER_OFF:
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, 0);
+
+		mmc_regulator_disable_vqmmc(mmc);
+		break;
+	case MMC_POWER_ON:
+		mmc_regulator_enable_vqmmc(mmc);
+		break;
+	case MMC_POWER_UP:
+		mmc_regulator_set_ocr(host->mmc, mmc->supply.vmmc, vdd);
+		break;
+	}
+}
+
 static struct sdhci_ops sdhci_sprd_ops = {
 	.read_l = sdhci_sprd_readl,
 	.write_l = sdhci_sprd_writel,
 	.write_w = sdhci_sprd_writew,
 	.write_b = sdhci_sprd_writeb,
 	.set_clock = sdhci_sprd_set_clock,
+	.set_power = sdhci_sprd_set_power,
 	.get_max_clock = sdhci_sprd_get_max_clock,
 	.get_min_clock = sdhci_sprd_get_min_clock,
 	.set_bus_width = sdhci_set_bus_width,
@@ -823,6 +844,10 @@ static int sdhci_sprd_probe(struct platform_device *pdev)
 	host->caps1 &= ~(SDHCI_SUPPORT_SDR50 | SDHCI_SUPPORT_SDR104 |
 			 SDHCI_SUPPORT_DDR50);
 
+	ret = mmc_regulator_get_supply(host->mmc);
+	if (ret)
+		goto pm_runtime_disable;
+
 	ret = sdhci_setup_host(host);
 	if (ret)
 		goto pm_runtime_disable;