Skip to content

Windows Installation Guide

Jump to bottom Edit New page
ljwolford edited this page Nov 22, 2011 · 22 revisions

Copyright 2011 SRI International

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

> http://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Guide created for Windows 7 64-bit environment; different tools may be required for different Windows environments.

#Prerequisites

1. Install Git

  • Install Git here
  • Click Run and follow setup instructions
    • Click Next
    • Click Next
    • Choose the path where you want to install it by clicking Browse...
    • Click Next
    • Keep the default selected components and click Next
    • If you would like to select a different folder for the shortcuts click Browse..
    • Click Next
    • Select Use Git Bash Only and click Next
    • Select Checkout Windows-style, commit Unix-style line endings and click Next
    • Click Finish

2. Install 7-Zip

  • Install the 64-bit .msi file here
  • Click Run and follow the setup instructions
    • Click Next
    • Accept the terms in the Licence Agreement and click Next
    • Choose the path you want to install it in by clicking Browse...
    • Click Next
    • Click Install
  • If successful, when right clicking on any file you should now have a 7-Zip option

3. Configure Internet Information Services (IIS)

  • Enable IIS and the correct IIS tools
    • Click Start -> Control Panel -> Programs -> Turn Windows features on or off
    • Check the box next to Internet Information Services
    • Expand Internet Information Services and check the box next to Web Management Tools if it not already filled in
    • Also be sure the box next to World Wide Web Services is checked
    • Expand Application Development Features inside of World Wide Web Services and check the boxes next to CGI and ISAPI Extensions
    • Click OK to save your changes

4. Enable FastCGI module for IIS

NOTE: We are encountering a PicklingError when starting the application and are working on the problem now. Whenever the error has been fixed the appropriate steps for enabling FastCGI will be added.

Python

Python 2.7.2 32-bit

  1. Install the Windows x86 MSI Installer(2.7.2)(sig) here
  2. Click Run and follow setup instructions
    • Choose Install for all users
    • Choose your Destination Directory (default is C:\Python27)
    • Click Next when asked to Customize Python 2.7.2
  3. Once installation is complete, add Python to your system path
    • Click Start -> Right click Computer -> click Properties -> click Advanced system settings -> click Environment Variables
    • Highlight the Path variable under System variables and click Edit...
    • Add [Directory]\Python27;[Directory]\Python27\Scripts; to the end of Variable value (ex: if Python was downloaded in your C:\ root, you would add C:\Python27;C:\Python27\Scripts;)
    • Click OK to exit the Edit System Variable Window, then click OK to exit the Environment Variables window, then click OK to exit the System Properties window

Python Setuptools

  1. Install the Windows executable, setuptools-0.6c11.win32-py2.7.exe, here
  2. Click Run and follow setup instructions
    • Click Next when prompted
    • Make sure Python Version 2.7 is highlighted and click Next
    • Click Next again to being the install
    • Click Finish when done

Pip

  1. Open the Windows command prompt (Start -> search for cmd)

  2. In the command prompt, enter the command easy_install pip and it will load pip on your machine, then you can proceed to install the other necessary modules:

  3. virtualenv pip install virtualenv

  4. pylons pip install pylons

  5. ijson pip install ijson

  6. flup pip install flup

  7. pyparsing pip install pyparsing

  8. iso8604plus pip install iso8601plus

  9. Go here and install, lxml-2.3.win32-py2.7.exe

  10. Click Run and follow setup instructions

    • Click Next when prompted
    • Make sure Python Version 2.7 is highlighted and click Next
    • Click Next again to begin the install
    • Click Finish

  11. Visit here and download yajl-2.0.1.tar.gz

    • Go into your Downloads folder and find the lloyd-yajl-2.0.1.tar.gz file
    • Right click on the lloyd-yajl-2.0.1.tar.gz file, hover over 7-Zip and choose Extract Here
    • Right click on the new lloyd-yajl-2.0.1.tar file, hover over 7-Zip and choose Extract Files...
    • Click the ... button and navigate to [Directory]\Python27\Lib and click OK

Py2exe

  1. Go here and install the py2exe-0.6.9.win32-py2.7.exe Windows installer
  2. Click Run and follow setup instructions
    • Click Next when prompted
    • Make sure Python Version 2.7 is highlighted and click Next
    • Click Next again to begin the install
    • Click Finish when done

Pywin32

  1. Go here and install the pywin32-216.win32-py2.7.exe Windows installer
  2. Click Run and follow setup instructions
    • Click Next when prompted
    • Make sure Python Version 2.7 is highlighted and click Next
    • Click Next again to begin the install
    • Click Finish when done

CouchDB

CouchDB 1.1.1

  1. Go here and download the setup-couchdb-1.1.1_js185_otp_R14B03+fix-win32-crypto.exe file
    • Click Run and follow setup instructions
    • Click Next
    • Accept the agreement and click Next
    • If you would like to select a different folder for installation click Browse... else just click Next
    • Make sure Install couchdb as a Windows service and Start the service after installation boxes are checked and click Next
    • Click Install
    • If prompted to Restart Computer select Yes and click Finish
  2. Make sure CouchDB is running correctly by going here, you should see {"couchdb":"Welcome","version":"1.1.1"}

##CouchApp

  1. If your Windows command prompt is still open, close it.
  2. Reopen the Windows command prompt (Start -> search for cmd) and enter the command pip install couchapp

#Checkout Learning Registry Source Code

  1. Open the Git Bash (Start -> search for Git Bash)
  2. Navigate to where you want your repository by using the cd [directory_name] command
  3. To gather the LR code from github, run the command git clone https://github.com/LearningRegistry/LearningRegistry
  4. Once it is done cloning, run the command, cd LearningRegistry to move into the LearningRegistry directory
  5. Run the command git tag –l to find the latest tag
  6. Checkout the latest tag by running the command, git checkout [latest tag version]

Running the LR Node

Push the CouchApps

  1. If your Windows command prompt is still open, close it.
  2. Reopen the Windows command prompt (Start -> search for cmd)
  3. Create a virtual environment to sandbox your LR instance
    • Run the command mkdir virtualenv and move into that directory cd virtualenv
    • Run the command virtualenv lr (lr will be the name of your virtual environment)
    • Navigate to the Scripts directory of lr cd lr/scripts
    • Run the command activate
    • (lr) should now appear at the beginning of your command line if successful 4.Navigate to the config folder of your LR repository cd [directory]/[LR Repository]/config
  4. Run the command python setup_node.py
  5. When prompted, enter http://localhost as your endpoint URL
  6. For the rest of the setup, just hit enter whenever prompted to input the default parameters
  7. When finished you should receive a message displaying, All CouchApps Pushed

Install the LR Node

  1. Navigate back to the main LR directory (using the command cd..
  2. Navigate to the LR directory (using the command cd lr)
  3. Run the command python setup.py install
  4. When finished you should receive a message displaying, Finished processing dependencies for LR==0.1dev

Start Application Server

NOTE: We are encountering a PicklingError when starting the application and are working on the problem now. These next few steps are subject to change depending on the solution for the error.

  1. While still in the LR directory, run the command paster serve development.ini
Add a custom footer
Add a custom sidebar
Clone this wiki locally