Merge tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux

Pull sh updates from John Paul Adrian Glaubitz:
 "Fixes and improvements for sh:

   - replace seq_printf() with the more efficient
     seq_put_decimal_ull_width() to increase performance when stress
     reading /proc/interrupts (David Wang)

   - migrate sh to the generic rule for built-in DTB to help avoid race
     conditions during parallel builds which can occur because Kbuild
     decends into arch/*/boot/dts twice (Masahiro Yamada)

   - replace select with imply in the board Kconfig for enabling
     hardware with complex dependencies. This addresses warnings which
     were reported by the kernel test robot (Geert Uytterhoeven)"

* tag 'sh-for-v6.14-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/glaubitz/sh-linux:
  sh: boards: Use imply to enable hardware with complex dependencies
  sh: Migrate to the generic rule for built-in DTB
  sh: irq: Use seq_put_decimal_ull_width() for decimal values

Author: torvalds

arch/sh/Kbuild

@@ -1,7 +1,6 @@
 # SPDX-License-Identifier: GPL-2.0-only
 obj-y				+= kernel/ mm/ boards/
 obj-$(CONFIG_SH_FPU_EMU)	+= math-emu/
-obj-$(CONFIG_USE_BUILTIN_DTB)	+= boot/dts/
 
 obj-$(CONFIG_HD6446X_SERIES)	+= cchips/hd6446x/
 

arch/sh/Kconfig

@@ -648,21 +648,22 @@ endmenu
 
 menu "Boot options"
 
-config USE_BUILTIN_DTB
+config BUILTIN_DTB
 	bool "Use builtin DTB"
 	default n
 	depends on SH_DEVICE_TREE
+	select GENERIC_BUILTIN_DTB
 	help
 	  Link a device tree blob for particular hardware into the kernel,
 	  suppressing use of the DTB pointer provided by the bootloader.
 	  This option should only be used with legacy bootloaders that are
 	  not capable of providing a DTB to the kernel, or for experimental
 	  hardware without stable device tree bindings.
 
-config BUILTIN_DTB_SOURCE
+config BUILTIN_DTB_NAME
 	string "Source file for builtin DTB"
 	default ""
-	depends on USE_BUILTIN_DTB
+	depends on BUILTIN_DTB
 	help
 	  Base name (without suffix, relative to arch/sh/boot/dts) for the
 	  a DTS file that will be used to produce the DTB linked into the

arch/sh/boards/Kconfig

@@ -80,8 +80,8 @@ config SH_7724_SOLUTION_ENGINE
 	select SOLUTION_ENGINE
 	depends on CPU_SUBTYPE_SH7724
 	select GPIOLIB
-	select SND_SOC_AK4642 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	imply SND_SOC_AK4642 if SND_SIMPLE_CARD
 	help
 	  Select 7724 SolutionEngine if configuring for a Hitachi SH7724
 	  evaluation board.
@@ -259,8 +259,8 @@ config SH_ECOVEC
 	bool "EcoVec"
 	depends on CPU_SUBTYPE_SH7724
 	select GPIOLIB
-	select SND_SOC_DA7210 if SND_SIMPLE_CARD
 	select REGULATOR_FIXED_VOLTAGE if REGULATOR
+	imply SND_SOC_DA7210 if SND_SIMPLE_CARD
 	help
 	  Renesas "R0P7724LC0011/21RL (EcoVec)" support.
 

arch/sh/boot/dts/Makefile

@@ -1,2 +1,2 @@
 # SPDX-License-Identifier: GPL-2.0-only
-obj-$(CONFIG_USE_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_SOURCE))
+obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .dtb.o, $(CONFIG_BUILTIN_DTB_NAME))

arch/sh/kernel/irq.c

@@ -43,9 +43,9 @@ int arch_show_interrupts(struct seq_file *p, int prec)
 {
 	int j;
 
-	seq_printf(p, "%*s: ", prec, "NMI");
+	seq_printf(p, "%*s:", prec, "NMI");
 	for_each_online_cpu(j)
-		seq_printf(p, "%10u ", per_cpu(irq_stat.__nmi_count, j));
+		seq_put_decimal_ull_width(p, " ", per_cpu(irq_stat.__nmi_count, j), 10);
 	seq_printf(p, "  Non-maskable interrupts\n");
 
 	seq_printf(p, "%*s: %10u\n", prec, "ERR", atomic_read(&irq_err_count));

arch/sh/kernel/setup.c

@@ -249,7 +249,7 @@ void __ref sh_fdt_init(phys_addr_t dt_phys)
 	/* Avoid calling an __init function on secondary cpus. */
 	if (done) return;
 
-#ifdef CONFIG_USE_BUILTIN_DTB
+#ifdef CONFIG_BUILTIN_DTB
 	dt_virt = __dtb_start;
 #else
 	dt_virt = phys_to_virt(dt_phys);
@@ -323,7 +323,7 @@ void __init setup_arch(char **cmdline_p)
 	sh_early_platform_driver_probe("earlyprintk", 1, 1);
 
 #ifdef CONFIG_OF_EARLY_FLATTREE
-#ifdef CONFIG_USE_BUILTIN_DTB
+#ifdef CONFIG_BUILTIN_DTB
 	unflatten_and_copy_device_tree();
 #else
 	unflatten_device_tree();