Problem With visualization axes

[fiorettone]

good evening I have a problem with h5 I just finished assembling and programming it but a strange thing happens if I have to move the z this is manual it only moves if disabled with q how do I set the display and therefore the axis quota how do I move it using the arrow keys only the quota in the display moves but the motor remains stopped. instead if I disable the z and therefore I no longer display it everything works practically the system works exclusively with the z not displayed because as I display it it disables the axis why?

[kachurovskiy]

Sounds like you need to invert the ENA signal going to the drivers - swap DHIGH and DLOW in https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L1139-L1143 and https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L3648-L3650

[fiorettone]

Ok now work correctly thankyou

[RobinI30N]

Sounds like you need to invert the ENA signal going to the drivers - swap DHIGH and DLOW in

This is a common case where the active state can have a different state.

This can be done automatically using the active state definition, e.g.

#define LEVEL_ACTIVE_HIGH true //true or false
digitalWrite(_PIN, LEVEL_ACTIVE_HIGH ? HIGH : LOW;);

[fiorettone]

Good evening, I just updated my H5 to the latest release. I have a 5-inch Nextion Touch display. I have two problems, the first is serious, that is, if I move manually using the arrows on the touch screen, sometimes the z also starts without having done anything.What could it be? The second problem is that I need to reverse enable from DHIGHT to DLOW but I can't find them in the code can you help me?Finally, is it possible to have some instructions on how to use the new version of the touch screen?

[kachurovskiy]

if I move manually using the arrows on the touch screen, sometimes the z also starts without having done anything.What could it be?

Is your touchscreen resistive or capacitive? Perhaps something is touching the edge of the screen - e.g. a knuckle of your other finger or perhaps you're holding the screen on the side?

I need to reverse enable

Flip these 2 flags:
https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L20
https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L33

[fiorettone]

Thanks for replying, and my display is the same one you put in the project! So capacitive.Il 19 set 2025 09:21, Maxim Kachurovskiy ***@***.***> ha scritto:kachurovskiy left a comment (kachurovskiy/nanoels#331) if I move manually using the arrows on the touch screen, sometimes the z also starts without having done anything.What could it be? Is your touchscreen resistive or capacitive? Perhaps something is touching the edge of the screen - e.g. a knuckle of your other finger or perhaps you're holding the screen on the side? I need to reverse enable Flip these 2 flags: https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L20 https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L33 —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[fiorettone]

Honestly I don't know if it touches anything but I only touch the x arrow at the top of the display and there's the film over the screen I don't know if that's what's bothering it but it seems strange to me.Then anyway the x is on the left of the screen and the Z is on the right, it doesn't even have to be said that the keys to press are close together, so if I press only the x on the display, how does the z start?Il 19 set 2025 10:41, Marco Franceschelli ***@***.***> ha scritto:Thanks for replying, and my display is the same one you put in the project! So capacitive.Il 19 set 2025 09:21, Maxim Kachurovskiy ***@***.***> ha scritto:kachurovskiy left a comment (kachurovskiy/nanoels#331) if I move manually using the arrows on the touch screen, sometimes the z also starts without having done anything.What could it be? Is your touchscreen resistive or capacitive? Perhaps something is touching the edge of the screen - e.g. a knuckle of your other finger or perhaps you're holding the screen on the side? I need to reverse enable Flip these 2 flags: https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L20 https://github.com/kachurovskiy/nanoels/blob/main/h5/h5.ino#L33 —Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you authored the thread.Message ID: ***@***.***>

[kachurovskiy]

Please remove the film from the screen, it's only for protection in transport.