docs: add auto-connect control cmd

Author: kavishdevar

docs/control_commands.md

@@ -25,23 +25,24 @@ These commands
 | 0x14 | SingleClickMode | Single value (1 byte) |
 | 0x15 | DoubleClickMode | Single value (1 byte) |
 | 0x16 | ClickHoldMode | Two values (2 bytes; First byte = right bud Second byte = for left): `0x01` = Noise control `0x05` = Siri |
-| 0x17 | DoubleClickInterval | Single value (1 byte): 0x00 = Default, `0x01` = Slower, `0x02` = Slowest|
-| 0x18 | ClickHoldInterval | Single value (1 byte): 0x00 = Default, `0x01` = Slower, `0x02` = Slowest|
+| 0x17 | DoubleClickInterval | Single value (1 byte): `0x00` = Default, `0x01` = Slower, `0x02` = Slowest|
+| 0x18 | ClickHoldInterval | Single value (1 byte): `0x00` = Default, `0x01` = Slower, `0x02` = Slowest|
 | 0x1A | ListeningModeConfigs | Single value (1 byte): bitmask, Off mode = `0x01`, ANC=`0x02`, Transparency = 0x04, Adaptive = `0x08` |
 | 0x1B | OneBudANCMode | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
 | 0x1C | CrownRotationDirection | Single value (1 byte): `0x01` = reversed, `0x02` = default |
 | 0x0D | ListeningMode | Single value (1 byte): 1 = Off, 2 = noise cancellation, 3 = transparency, 4 = adaptive |
 | 0x1E | AutoAnswerMode | Single value (1 byte) |
 | 0x1F | Chime Volume | Single value (1 byte): 0 to 100|
-| 0x23 | VolumeSwipeInterval | Single value (1 byte): 0x00 = Default, `0x01` = Longer, `0x02` = Longest |
+| 0x20 | Auto Connect | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
+| 0x23 | VolumeSwipeInterval | Single value (1 byte): `0x00` = Default, `0x01` = Longer, `0x02` = Longest |
 | 0x24 | Call Management Config | Single value (1 byte) |
 | 0x25 | VolumeSwipeMode | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
 | 0x26 | Adaptive Volume Config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
 | 0x27 | Software Mute config | Single value (1 byte) |
 | 0x28 | Conversation Detect config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |
 | 0x29 | SSL | Single value (1 byte) |
 | 0x2C | Hearing Aid Enrolled and Hearing Aid Enabled | Two values (2 bytes; First byte - enrolled, Second byte = enabled): `0x01` = enabled, `0x02` = disabled |
-| 0x2E | AutoANC Strength | Single value (1 byte): 0 to 100|
+| 0x2E | AutoANC Strength | Single value (1 byte): 0 to 100 |
 | 0x2F | HPS Gain Swipe | Single value (1 byte) |
 | 0x30 | HRM enable/disable state | Single value (1 byte) |
 | 0x31 | In Case Tone config | Single value (1 byte): `0x01` = enabled, `0x02` = disabled |