dt-bindings: net: Convert amd,xgbe-seattle-v1a to DT schema

Convert amd,xgbe-seattle-v1a binding to DT schema format. It's a
straight-forward conversion.

Signed-off-by: Rob Herring (Arm) <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Paolo Abeni <[email protected]>

Author: robherring

Documentation/devicetree/bindings/net/amd,xgbe-seattle-v1a.yaml

@@ -0,0 +1,147 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/amd,xgbe-seattle-v1a.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: AMD XGBE Seattle v1a
+
+maintainers:
+  - Shyam Sundar S K <[email protected]>
+
+allOf:
+  - $ref: /schemas/net/ethernet-controller.yaml#
+
+properties:
+  compatible:
+    const: amd,xgbe-seattle-v1a
+
+  reg:
+    items:
+      - description: MAC registers
+      - description: PCS registers
+      - description: SerDes Rx/Tx registers
+      - description: SerDes integration registers (1/2)
+      - description: SerDes integration registers (2/2)
+
+  interrupts:
+    description: Device interrupts. The first entry is the general device
+      interrupt. If amd,per-channel-interrupt is specified, each DMA channel
+      interrupt must be specified. The last entry is the PCS auto-negotiation
+      interrupt.
+    minItems: 2
+    maxItems: 6
+
+  clocks:
+    items:
+      - description: DMA clock for the device
+      - description: PTP clock for the device
+
+  clock-names:
+    items:
+      - const: dma_clk
+      - const: ptp_clk
+
+  iommus:
+    maxItems: 1
+
+  phy-mode: true
+
+  dma-coherent: true
+
+  amd,per-channel-interrupt:
+    description: Indicates that Rx and Tx complete will generate a unique
+      interrupt for each DMA channel.
+    type: boolean
+
+  amd,speed-set:
+    description: >
+      Speed capabilities of the device.
+        0 = 1GbE and 10GbE
+        1 = 2.5GbE and 10GbE
+    $ref: /schemas/types.yaml#/definitions/uint32
+    enum: [0, 1]
+
+  amd,serdes-blwc:
+    description: Baseline wandering correction enablement for each speed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    minItems: 3
+    maxItems: 3
+    items:
+      enum: [0, 1]
+
+  amd,serdes-cdr-rate:
+    description: CDR rate speed selection for each speed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: CDR rate for 1GbE
+      - description: CDR rate for 2.5GbE
+      - description: CDR rate for 10GbE
+
+  amd,serdes-pq-skew:
+    description: PQ data sampling skew for each speed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: PQ skew for 1GbE
+      - description: PQ skew for 2.5GbE
+      - description: PQ skew for 10GbE
+
+  amd,serdes-tx-amp:
+    description: TX amplitude boost for each speed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: TX amplitude for 1GbE
+      - description: TX amplitude for 2.5GbE
+      - description: TX amplitude for 10GbE
+
+  amd,serdes-dfe-tap-config:
+    description: DFE taps available to run for each speed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: DFE taps available for 1GbE
+      - description: DFE taps available for 2.5GbE
+      - description: DFE taps available for 10GbE
+
+  amd,serdes-dfe-tap-enable:
+    description: DFE taps to enable for each speed.
+    $ref: /schemas/types.yaml#/definitions/uint32-array
+    items:
+      - description: DFE taps to enable for 1GbE
+      - description: DFE taps to enable for 2.5GbE
+      - description: DFE taps to enable for 10GbE
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - clocks
+  - clock-names
+  - phy-mode
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    ethernet@e0700000 {
+        compatible = "amd,xgbe-seattle-v1a";
+        reg = <0xe0700000 0x80000>,
+              <0xe0780000 0x80000>,
+              <0xe1240800 0x00400>,
+              <0xe1250000 0x00060>,
+              <0xe1250080 0x00004>;
+        interrupts = <0 325 4>,
+                     <0 326 1>, <0 327 1>, <0 328 1>, <0 329 1>,
+                     <0 323 4>;
+        amd,per-channel-interrupt;
+        clocks = <&xgbe_dma_clk>, <&xgbe_ptp_clk>;
+        clock-names = "dma_clk", "ptp_clk";
+        phy-mode = "xgmii";
+        mac-address = [ 02 a1 a2 a3 a4 a5 ];
+        amd,speed-set = <0>;
+        amd,serdes-blwc = <1>, <1>, <0>;
+        amd,serdes-cdr-rate = <2>, <2>, <7>;
+        amd,serdes-pq-skew = <10>, <10>, <30>;
+        amd,serdes-tx-amp = <15>, <15>, <10>;
+        amd,serdes-dfe-tap-config = <3>, <3>, <1>;
+        amd,serdes-dfe-tap-enable = <0>, <0>, <127>;
+    };