clk: renesas: r9a08g045: Add MSTOP for coupled clocks as well

If MSTOP is not added for both clocks in a coupled pair, and the clocks
are not disabled in the reverse order of their enable sequence, the MSTOP
may remain enabled when disabling the clocks.

This happens because rzg2l_mod_clock_endisable() executes for coupled
clocks only when a single clock from the pair is enabled. If one clock has
no MSTOP defined, it can result in the MSTOP configuration being left
active when the clocks are disabled out of order (i.e., not in the reverse
order of enabling).

Fixes: c496959 ("clk: renesas: r9a08g045: Drop power domain instantiation")
Signed-off-by: Claudiu Beznea <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>
Link: https://lore.kernel.org/[email protected]
Signed-off-by: Geert Uytterhoeven <[email protected]>

Author: claudiubeznea

drivers/clk/renesas/r9a08g045-cpg.c

@@ -256,11 +256,13 @@ static const struct rzg2l_mod_clk r9a08g045_mod_clks[] = {
 					MSTOP(BUS_PERI_COM, BIT(4))),
 	DEF_COUPLED("eth0_axi",		R9A08G045_ETH0_CLK_AXI, R9A08G045_CLK_M0, 0x57c, 0,
 					MSTOP(BUS_PERI_COM, BIT(2))),
-	DEF_COUPLED("eth0_chi",		R9A08G045_ETH0_CLK_CHI, R9A08G045_CLK_ZT, 0x57c, 0, 0),
+	DEF_COUPLED("eth0_chi",		R9A08G045_ETH0_CLK_CHI, R9A08G045_CLK_ZT, 0x57c, 0,
+					MSTOP(BUS_PERI_COM, BIT(2))),
 	DEF_MOD("eth0_refclk",		R9A08G045_ETH0_REFCLK, R9A08G045_CLK_HP, 0x57c, 8, 0),
 	DEF_COUPLED("eth1_axi",		R9A08G045_ETH1_CLK_AXI, R9A08G045_CLK_M0, 0x57c, 1,
 					MSTOP(BUS_PERI_COM, BIT(3))),
-	DEF_COUPLED("eth1_chi",		R9A08G045_ETH1_CLK_CHI, R9A08G045_CLK_ZT, 0x57c, 1, 0),
+	DEF_COUPLED("eth1_chi",		R9A08G045_ETH1_CLK_CHI, R9A08G045_CLK_ZT, 0x57c, 1,
+					MSTOP(BUS_PERI_COM, BIT(3))),
 	DEF_MOD("eth1_refclk",		R9A08G045_ETH1_REFCLK, R9A08G045_CLK_HP, 0x57c, 9, 0),
 	DEF_MOD("i2c0_pclk",		R9A08G045_I2C0_PCLK, R9A08G045_CLK_P0, 0x580, 0,
 					MSTOP(BUS_MCPU2, BIT(10))),