cxl/edac: Add CXL memory device patrol scrub control feature

CXL spec 3.2 section 8.2.10.9.11.1 describes the device patrol scrub
control feature. The device patrol scrub proactively locates and makes
corrections to errors in regular cycle.

Allow specifying the number of hours within which the patrol scrub must be
completed, subject to minimum and maximum limits reported by the device.
Also allow disabling scrub allowing trade-off error rates against
performance.

Add support for patrol scrub control on CXL memory devices.
Register with the EDAC device driver, which retrieves the scrub attribute
descriptors from EDAC scrub and exposes the sysfs scrub control attributes
to userspace. For example, scrub control for the CXL memory device
"cxl_mem0" is exposed in /sys/bus/edac/devices/cxl_mem0/scrubX/.

Additionally, add support for region-based CXL memory patrol scrub control.
CXL memory regions may be interleaved across one or more CXL memory
devices. For example, region-based scrub control for "cxl_region1" is
exposed in /sys/bus/edac/devices/cxl_region1/scrubX/.

[dj: A few formatting fixes from Jonathan]

Reviewed-by: Dave Jiang <[email protected]>
Co-developed-by: Jonathan Cameron <[email protected]>
Signed-off-by: Jonathan Cameron <[email protected]>
Signed-off-by: Shiju Jose <[email protected]>
Reviewed-by: Alison Schofield <[email protected]>
Acked-by: Dan Williams <[email protected]>
Link: https://patch.msgid.link/[email protected]
Signed-off-by: Dave Jiang <[email protected]>

Author: shijujose4

drivers/cxl/Kconfig

@@ -114,6 +114,39 @@ config CXL_FEATURES
 
 	  If unsure say 'n'
 
+config CXL_EDAC_MEM_FEATURES
+	bool "CXL: EDAC Memory Features"
+	depends on EXPERT
+	depends on CXL_MEM
+	depends on CXL_FEATURES
+	depends on EDAC >= CXL_BUS
+	help
+	  The CXL EDAC memory feature is optional and allows host to
+	  control the EDAC memory features configurations of CXL memory
+	  expander devices.
+
+	  Say 'y' if you have an expert need to change default settings
+	  of a memory RAS feature established by the platform/device.
+	  Otherwise say 'n'.
+
+config CXL_EDAC_SCRUB
+	bool "Enable CXL Patrol Scrub Control (Patrol Read)"
+	depends on CXL_EDAC_MEM_FEATURES
+	depends on EDAC_SCRUB
+	help
+	  The CXL EDAC scrub control is optional and allows host to
+	  control the scrub feature configurations of CXL memory expander
+	  devices.
+
+	  When enabled 'cxl_mem' and 'cxl_region' EDAC devices are
+	  published with memory scrub control attributes as described by
+	  Documentation/ABI/testing/sysfs-edac-scrub.
+
+	  Say 'y' if you have an expert need to change default settings
+	  of a memory scrub feature established by the platform/device
+	  (e.g. scrub rates for the patrol scrub feature).
+	  Otherwise say 'n'.
+
 config CXL_PORT
 	default CXL_BUS
 	tristate

drivers/cxl/core/Makefile

@@ -20,3 +20,4 @@ cxl_core-$(CONFIG_TRACING) += trace.o
 cxl_core-$(CONFIG_CXL_REGION) += region.o
 cxl_core-$(CONFIG_CXL_MCE) += mce.o
 cxl_core-$(CONFIG_CXL_FEATURES) += features.o
+cxl_core-$(CONFIG_CXL_EDAC_MEM_FEATURES) += edac.o