Merge tag 'qcom-clk-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux into clk-fixes

Pull Qualcomm clk driver fixes from Bjorn Andersson:

This corrects several issues with the Alpha PLL clock driver.

It updates IPQ9574 GCC driver to correctly use the EVO PLL registers for
GPLL clocks. X1E USB GDSC flags are corrected to leave these in
retention as the controllers are suspended.

* tag 'qcom-clk-fixes-for-6.11' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
  clk: qcom: ipq9574: Update the alpha PLL type for GPLLs
  clk: qcom: gcc-x1e80100: Fix USB 0 and 1 PHY GDSC pwrsts flags
  clk: qcom: clk-alpha-pll: Update set_rate for Zonda PLL
  clk: qcom: clk-alpha-pll: Fix zonda set_rate failure when PLL is disabled
  clk: qcom: clk-alpha-pll: Fix the trion pll postdiv set rate API
  clk: qcom: clk-alpha-pll: Fix the pll post div mask

Author: bebarino

drivers/clk/qcom/clk-alpha-pll.c

@@ -40,7 +40,8 @@
 
 #define PLL_USER_CTL(p)		((p)->offset + (p)->regs[PLL_OFF_USER_CTL])
 # define PLL_POST_DIV_SHIFT	8
-# define PLL_POST_DIV_MASK(p)	GENMASK((p)->width, 0)
+# define PLL_POST_DIV_MASK(p)	GENMASK((p)->width - 1, 0)
+# define PLL_ALPHA_MSB		BIT(15)
 # define PLL_ALPHA_EN		BIT(24)
 # define PLL_ALPHA_MODE		BIT(25)
 # define PLL_VCO_SHIFT		20
@@ -1552,8 +1553,8 @@ clk_trion_pll_postdiv_set_rate(struct clk_hw *hw, unsigned long rate,
 	}
 
 	return regmap_update_bits(regmap, PLL_USER_CTL(pll),
-				  PLL_POST_DIV_MASK(pll) << PLL_POST_DIV_SHIFT,
-				  val << PLL_POST_DIV_SHIFT);
+				  PLL_POST_DIV_MASK(pll) << pll->post_div_shift,
+				  val << pll->post_div_shift);
 }
 
 const struct clk_ops clk_alpha_pll_postdiv_trion_ops = {
@@ -2117,6 +2118,18 @@ static void clk_zonda_pll_disable(struct clk_hw *hw)
 	regmap_write(regmap, PLL_OPMODE(pll), 0x0);
 }
 
+static void zonda_pll_adjust_l_val(unsigned long rate, unsigned long prate, u32 *l)
+{
+	u64 remainder, quotient;
+
+	quotient = rate;
+	remainder = do_div(quotient, prate);
+	*l = quotient;
+
+	if ((remainder * 2) / prate)
+		*l = *l + 1;
+}
+
 static int clk_zonda_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 				  unsigned long prate)
 {
@@ -2133,9 +2146,15 @@ static int clk_zonda_pll_set_rate(struct clk_hw *hw, unsigned long rate,
 	if (ret < 0)
 		return ret;
 
+	if (a & PLL_ALPHA_MSB)
+		zonda_pll_adjust_l_val(rate, prate, &l);
+
 	regmap_write(pll->clkr.regmap, PLL_ALPHA_VAL(pll), a);
 	regmap_write(pll->clkr.regmap, PLL_L_VAL(pll), l);
 
+	if (!clk_hw_is_enabled(hw))
+		return 0;
+
 	/* Wait before polling for the frequency latch */
 	udelay(5);
 

drivers/clk/qcom/gcc-ipq9574.c

@@ -68,7 +68,7 @@ static const struct clk_parent_data gcc_sleep_clk_data[] = {
 
 static struct clk_alpha_pll gpll0_main = {
 	.offset = 0x20000,
-	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT_EVO],
 	.clkr = {
 		.enable_reg = 0x0b000,
 		.enable_mask = BIT(0),
@@ -96,7 +96,7 @@ static struct clk_fixed_factor gpll0_out_main_div2 = {
 
 static struct clk_alpha_pll_postdiv gpll0 = {
 	.offset = 0x20000,
-	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT_EVO],
 	.width = 4,
 	.clkr.hw.init = &(const struct clk_init_data) {
 		.name = "gpll0",
@@ -110,7 +110,7 @@ static struct clk_alpha_pll_postdiv gpll0 = {
 
 static struct clk_alpha_pll gpll4_main = {
 	.offset = 0x22000,
-	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT_EVO],
 	.clkr = {
 		.enable_reg = 0x0b000,
 		.enable_mask = BIT(2),
@@ -125,7 +125,7 @@ static struct clk_alpha_pll gpll4_main = {
 
 static struct clk_alpha_pll_postdiv gpll4 = {
 	.offset = 0x22000,
-	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT_EVO],
 	.width = 4,
 	.clkr.hw.init = &(const struct clk_init_data) {
 		.name = "gpll4",
@@ -139,7 +139,7 @@ static struct clk_alpha_pll_postdiv gpll4 = {
 
 static struct clk_alpha_pll gpll2_main = {
 	.offset = 0x21000,
-	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT_EVO],
 	.clkr = {
 		.enable_reg = 0x0b000,
 		.enable_mask = BIT(1),
@@ -154,7 +154,7 @@ static struct clk_alpha_pll gpll2_main = {
 
 static struct clk_alpha_pll_postdiv gpll2 = {
 	.offset = 0x21000,
-	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT],
+	.regs = clk_alpha_pll_regs[CLK_ALPHA_PLL_TYPE_DEFAULT_EVO],
 	.width = 4,
 	.clkr.hw.init = &(const struct clk_init_data) {
 		.name = "gpll2",

drivers/clk/qcom/gcc-x1e80100.c

@@ -6203,7 +6203,7 @@ static struct gdsc gcc_usb_0_phy_gdsc = {
 	.pd = {
 		.name = "gcc_usb_0_phy_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
 };
 
@@ -6215,7 +6215,7 @@ static struct gdsc gcc_usb_1_phy_gdsc = {
 	.pd = {
 		.name = "gcc_usb_1_phy_gdsc",
 	},
-	.pwrsts = PWRSTS_OFF_ON,
+	.pwrsts = PWRSTS_RET_ON,
 	.flags = POLL_CFG_GDSCR | RETAIN_FF_ENABLE,
 };