Merge tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci

Pull PCI updates from Bjorn Helgaas:
 "Enumeration:

   - Make pci_stop_dev() and pci_destroy_dev() safe so concurrent
     callers can't stop a device multiple times, even as we migrate from
     the global pci_rescan_remove_lock to finer-grained locking (Keith
     Busch)

   - Improve pci_walk_bus() implementation by making it recursive and
     moving locking up to avoid need for a 'locked' parameter (Keith
     Busch)

   - Unexport pci_walk_bus_locked(), which is only used internally by
     the PCI core (Keith Busch)

   - Detect some Thunderbolt chips that are built-in and hence
     'trustworthy' by a heuristic since the 'ExternalFacingPort' and
     'usb4-host-interface' ACPI properties are not quite enough (Esther
     Shimanovich)

  Resource management:

   - Use PCI bus addresses (not CPU addresses) in 'ranges' properties
     when building dynamic DT nodes so systems where PCI and CPU
     addresses differ work correctly (Andrea della Porta)

   - Tidy resource sizing and assignment with helpers to reduce
     redundancy (Ilpo Järvinen)

   - Improve pdev_sort_resources() 'bogus alignment' warning to be more
     specific (Ilpo Järvinen)

  Driver binding:

   - Convert driver .remove_new() callbacks to .remove() again to finish
     the conversion from returning 'int' to being 'void' (Sergio
     Paracuellos)

   - Export pcim_request_all_regions(), a managed interface to request
     all BARs (Philipp Stanner)

   - Replace pcim_iomap_regions_request_all() with
     pcim_request_all_regions(), and pcim_iomap_table()[n] with
     pcim_iomap(n), in the following drivers: ahci, crypto qat, crypto
     octeontx2, intel_th, iwlwifi, ntb idt, serial rp2, ALSA korg1212
     (Philipp Stanner)

   - Remove the now unused pcim_iomap_regions_request_all() (Philipp
     Stanner)

   - Export pcim_iounmap_region(), a managed interface to unmap and
     release a PCI BAR (Philipp Stanner)

   - Replace pcim_iomap_regions(mask) with pcim_iomap_region(n), and
     pcim_iounmap_regions(mask) with pcim_iounmap_region(n), in the
     following drivers: fpga dfl-pci, block mtip32xx, gpio-merrifield,
     cavium (Philipp Stanner)

  Error handling:

   - Add sysfs 'reset_subordinate' to reset the entire hierarchy below a
     bridge; previously Secondary Bus Reset could only be used when
     there was a single device below a bridge (Keith Busch)

   - Warn if we reset a running device where the driver didn't register
     pci_error_handlers notification callbacks (Keith Busch)

  ASPM:

   - Disable ASPM L1 before touching L1 PM Substates to follow the spec
     closer and avoid a CPU load timeout on some platforms (Ajay
     Agarwal)

   - Set devices below Intel VMD to D0 before enabling ASPM L1 Substates
     as required per spec for all L1 Substates changes (Jian-Hong Pan)

  Power management:

   - Enable starfive controller runtime PM before probing host bridge
     (Mayank Rana)

   - Enable runtime power management for host bridges (Krishna chaitanya
     chundru)

  Power control:

   - Use of_platform_device_create() instead of of_platform_populate()
     to create pwrctl platform devices so we can control it based on the
     child nodes (Manivannan Sadhasivam)

   - Create pwrctrl platform devices only if there's a relevant power
     supply property (Manivannan Sadhasivam)

   - Add device link from the pwrctl supplier to the PCI dev to ensure
     pwrctl drivers are probed before the PCI dev driver; this avoids a
     race where pwrctl could change device power state while the PCI
     driver was active (Manivannan Sadhasivam)

   - Find pwrctl device for removal with of_find_device_by_node()
     instead of searching all children of the parent (Manivannan
     Sadhasivam)

   - Rename 'pwrctl' to 'pwrctrl' to match new bandwidth controller
     ('bwctrl') and hotplug files (Bjorn Helgaas)

  Bandwidth control:

   - Add read/modify/write locking for Link Control 2, which is used to
     manage Link speed (Ilpo Järvinen)

   - Extract Link Bandwidth Management Status check into
     pcie_lbms_seen(), where it can be shared between the bandwidth
     controller and quirks that use it to help retrain failed links
     (Ilpo Järvinen)

   - Re-add Link Bandwidth notification support with updates to address
     the reasons it was previously reverted (Alexandru Gagniuc, Ilpo
     Järvinen)

   - Add pcie_set_target_speed() and related functionality so drivers
     can manage PCIe Link speed based on thermal or other constraints
     (Ilpo Järvinen)

   - Add a thermal cooling driver to throttle PCIe Links via the
     existing thermal management framework (Ilpo Järvinen)

   - Add a userspace selftest for the PCIe bandwidth controller (Ilpo
     Järvinen)

  PCI device hotplug:

   - Add hotplug controller driver for Marvell OCTEON multi-function
     device where function 0 has a management console interface to
     enable/disable and provision various personalities for the other
     functions (Shijith Thotton)

   - Retain a reference to the pci_bus for the lifetime of a pci_slot to
     avoid a use-after-free when the thunderbolt driver resets USB4 host
     routers on boot, causing hotplug remove/add of downstream docks or
     other devices (Lukas Wunner)

   - Remove unused cpcihp struct cpci_hp_controller_ops.hardware_test
     (Guilherme Giacomo Simoes)

   - Remove unused cpqphp struct ctrl_dbg.ctrl (Christophe JAILLET)

   - Use pci_bus_read_dev_vendor_id() instead of hand-coded presence
     detection in cpqphp (Ilpo Järvinen)

   - Simplify cpqphp enumeration, which is already simple-minded and
     doesn't handle devices below hot-added bridges (Ilpo Järvinen)

  Virtualization:

   - Add ACS quirk for Wangxun FF5xxx NICs, which don't advertise an ACS
     capability but do isolate functions as though PCI_ACS_RR and
     PCI_ACS_CR were set, so the functions can be in independent IOMMU
     groups (Mengyuan Lou)

  TLP Processing Hints (TPH):

   - Add and document TLP Processing Hints (TPH) support so drivers can
     enable and disable TPH and the kernel can save/restore TPH
     configuration (Wei Huang)

   - Add TPH Steering Tag support so drivers can retrieve Steering Tag
     values associated with specific CPUs via an ACPI _DSM to improve
     performance by directing DMA writes closer to their consumers (Wei
     Huang)

  Data Object Exchange (DOE):

   - Wait up to 1 second for DOE Busy bit to clear before writing a
     request to the mailbox to avoid failures if the mailbox is still
     busy from a previous transfer (Gregory Price)

  Endpoint framework:

   - Skip attempts to allocate from endpoint controller memory window if
     the requested size is larger than the window (Damien Le Moal)

   - Add and document pci_epc_mem_map() and pci_epc_mem_unmap() to
     handle controller-specific size and alignment constraints, and add
     test cases to the endpoint test driver (Damien Le Moal)

   - Implement dwc pci_epc_ops.align_addr() so pci_epc_mem_map() can
     observe DWC-specific alignment requirements (Damien Le Moal)

   - Synchronously cancel command handler work in endpoint test before
     cleaning up DMA and BARs (Damien Le Moal)

   - Respect endpoint page size in dw_pcie_ep_align_addr() (Niklas
     Cassel)

   - Use dw_pcie_ep_align_addr() in dw_pcie_ep_raise_msi_irq() and
     dw_pcie_ep_raise_msix_irq() instead of open coding the equivalent
     (Niklas Cassel)

   - Avoid NULL dereference if Modem Host Interface Endpoint lacks
     'mmio' DT property (Zhongqiu Han)

   - Release PCI domain ID of Endpoint controller parent (not controller
     itself) and before unregistering the controller, to avoid
     use-after-free (Zijun Hu)

   - Clear secondary (not primary) EPC in pci_epc_remove_epf() when
     removing the secondary controller associated with an NTB (Zijun Hu)

  Cadence PCIe controller driver:

   - Lower severity of 'phy-names' message (Bartosz Wawrzyniak)

  Freescale i.MX6 PCIe controller driver:

   - Fix suspend/resume support on i.MX6QDL, which has a hardware
     erratum that prevents use of L2 (Stefan Eichenberger)

  Intel VMD host bridge driver:

   - Add 0xb60b and 0xb06f Device IDs for client SKUs (Nirmal Patel)

  MediaTek PCIe Gen3 controller driver:

   - Update mediatek-gen3 DT binding to require the exact number of
     clocks for each SoC (Fei Shao)

   - Add support for DT 'max-link-speed' and 'num-lanes' properties to
     restrict the link speed and width (AngeloGioacchino Del Regno)

  Microchip PolarFlare PCIe controller driver:

   - Add DT and driver support for using either of the two PolarFire
     Root Ports (Conor Dooley)

  NVIDIA Tegra194 PCIe controller driver:

   - Move endpoint controller cleanups that depend on refclk from the
     host to the notifier that tells us the host has deasserted PERST#,
     when refclk should be valid (Manivannan Sadhasivam)

  Qualcomm PCIe controller driver:

   - Add qcom SAR2130P DT binding with an additional clock (Dmitry
     Baryshkov)

   - Enable MSI interrupts if 'global' IRQ is supported, since a
     previous commit unintentionally masked them (Manivannan Sadhasivam)

   - Move endpoint controller cleanups that depend on refclk from the
     host to the notifier that tells us the host has deasserted PERST#,
     when refclk should be valid (Manivannan Sadhasivam)

   - Add DT binding and driver support for IPQ9574, with Synopsys IP
     v5.80a and Qcom IP 1.27.0 (devi priya)

   - Move the OPP "operating-points-v2" table from the
     qcom,pcie-sm8450.yaml DT binding to qcom,pcie-common.yaml, where it
     can be used by other Qcom platforms (Qiang Yu)

   - Add 'global' SPI interrupt for events like link-up, link-down to
     qcom,pcie-x1e80100 DT binding so we can start enumeration when the
     link comes up (Qiang Yu)

   - Disable ASPM L0s for qcom,pcie-x1e80100 since the PHY is not tuned
     to support this (Qiang Yu)

   - Add ops_1_21_0 for SC8280X family SoC, which doesn't use the
     'iommu-map' DT property and doesn't need BDF-to-SID translation
     (Qiang Yu)

  Rockchip PCIe controller driver:

   - Define ROCKCHIP_PCIE_AT_SIZE_ALIGN to replace magic 256 endpoint
     .align value (Damien Le Moal)

   - When unmapping an endpoint window, compute the region index instead
     of searching for it, and verify that the address was mapped (Damien
     Le Moal)

   - When mapping an endpoint window, verify that the address hasn't
     been mapped already (Damien Le Moal)

   - Implement pci_epc_ops.align_addr() for rockchip-ep (Damien Le Moal)

   - Fix MSI IRQ data mapping to observe the alignment constraint, which
     fixes intermittent page faults in memcpy_toio() and memcpy_fromio()
     (Damien Le Moal)

   - Rename rockchip_pcie_parse_ep_dt() to
     rockchip_pcie_ep_get_resources() for consistency with similar DT
     interfaces (Damien Le Moal)

   - Skip the unnecessary link train in rockchip_pcie_ep_probe() and do
     it only in the endpoint start operation (Damien Le Moal)

   - Implement pci_epc_ops.stop_link() to disable link training and
     controller configuration (Damien Le Moal)

   - Attempt link training at 5 GT/s when both partners support it
     (Damien Le Moal)

   - Add a handler for PERST# signal so we can detect host-initiated
     resets and start link training after PERST# is deasserted (Damien
     Le Moal)

  Synopsys DesignWare PCIe controller driver:

   - Clear outbound address on unmap so dw_pcie_find_index() won't match
     an ATU index that was already unmapped (Damien Le Moal)

   - Use of_property_present() instead of of_property_read_bool() when
     testing for presence of non-boolean DT properties (Rob Herring)

   - Advertise 1MB size if endpoint supports Resizable BARs, which was
     inadvertently lost in v6.11 (Niklas Cassel)

  TI J721E PCIe driver:

   - Add PCIe support for J722S SoC (Siddharth Vadapalli)

   - Delay PCIE_T_PVPERL_MS (100 ms), not just PCIE_T_PERST_CLK_US (100
     us), before deasserting PERST# to ensure power and refclk are
     stable (Siddharth Vadapalli)

  TI Keystone PCIe controller driver:

   - Set the 'ti,keystone-pcie' mode so v3.65a devices work in Root
     Complex mode (Kishon Vijay Abraham I)

   - Try to avoid unrecoverable SError for attempts to issue config
     transactions when the link is down; this is racy but the best we
     can do (Kishon Vijay Abraham I)

  Miscellaneous:

   - Reorganize kerneldoc parameter names to match order in function
     signature (Julia Lawall)

   - Fix sysfs reset_method_store() memory leak (Todd Kjos)

   - Simplify pci_create_slot() (Ilpo Järvinen)

   - Fix incorrect printf format specifiers in pcitest (Luo Yifan)"

* tag 'pci-v6.13-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (127 commits)
  PCI: rockchip-ep: Handle PERST# signal in EP mode
  PCI: rockchip-ep: Improve link training
  PCI: rockship-ep: Implement the pci_epc_ops::stop_link() operation
  PCI: rockchip-ep: Refactor endpoint link training enable
  PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() MSI-X hiding
  PCI: rockchip-ep: Refactor rockchip_pcie_ep_probe() memory allocations
  PCI: rockchip-ep: Rename rockchip_pcie_parse_ep_dt()
  PCI: rockchip-ep: Fix MSI IRQ data mapping
  PCI: rockchip-ep: Implement the pci_epc_ops::align_addr() operation
  PCI: rockchip-ep: Improve rockchip_pcie_ep_map_addr()
  PCI: rockchip-ep: Improve rockchip_pcie_ep_unmap_addr()
  PCI: rockchip-ep: Use a macro to define EP controller .align feature
  PCI: rockchip-ep: Fix address translation unit programming
  PCI/pwrctrl: Rename pwrctrl functions and structures
  PCI/pwrctrl: Rename pwrctl files to pwrctrl
  PCI/pwrctl: Remove pwrctl device without iterating over all children of pwrctl parent
  PCI/pwrctl: Ensure that pwrctl drivers are probed before PCI client drivers
  PCI/pwrctl: Create pwrctl device only if at least one power supply is present
  PCI/pwrctl: Use of_platform_device_create() to create pwrctl devices
  tools: PCI: Fix incorrect printf format specifiers
  ...

Author: torvalds

Documentation/ABI/testing/sysfs-bus-pci

@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	[email protected]
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <[email protected]>

Documentation/PCI/endpoint/pci-endpoint.rst

@@ -117,6 +117,35 @@ by the PCI endpoint function driver.
    The PCI endpoint function driver should use pci_epc_mem_free_addr() to
    free the memory space allocated using pci_epc_mem_alloc_addr().
 
+* pci_epc_map_addr()
+
+  A PCI endpoint function driver should use pci_epc_map_addr() to map to a RC
+  PCI address the CPU address of local memory obtained with
+  pci_epc_mem_alloc_addr().
+
+* pci_epc_unmap_addr()
+
+  A PCI endpoint function driver should use pci_epc_unmap_addr() to unmap the
+  CPU address of local memory mapped to a RC address with pci_epc_map_addr().
+
+* pci_epc_mem_map()
+
+  A PCI endpoint controller may impose constraints on the RC PCI addresses that
+  can be mapped. The function pci_epc_mem_map() allows endpoint function
+  drivers to allocate and map controller memory while handling such
+  constraints. This function will determine the size of the memory that must be
+  allocated with pci_epc_mem_alloc_addr() for successfully mapping a RC PCI
+  address range. This function will also indicate the size of the PCI address
+  range that was actually mapped, which can be less than the requested size, as
+  well as the offset into the allocated memory to use for accessing the mapped
+  RC PCI address range.
+
+* pci_epc_mem_unmap()
+
+  A PCI endpoint function driver can use pci_epc_mem_unmap() to unmap and free
+  controller memory that was allocated and mapped using pci_epc_mem_map().
+
+
 Other EPC APIs
 ~~~~~~~~~~~~~~
 

Documentation/PCI/index.rst

@@ -18,3 +18,4 @@ PCI Bus Subsystem
    pcieaer-howto
    endpoint/index
    boot-interrupts
+   tph

Documentation/PCI/pciebus-howto.rst

@@ -217,8 +217,12 @@ capability structure except the PCI Express capability structure,
 that is shared between many drivers including the service drivers.
 RMW Capability accessors (pcie_capability_clear_and_set_word(),
 pcie_capability_set_word(), and pcie_capability_clear_word()) protect
-a selected set of PCI Express Capability Registers (Link Control
-Register and Root Control Register). Any change to those registers
-should be performed using RMW accessors to avoid problems due to
-concurrent updates. For the up-to-date list of protected registers,
-see pcie_capability_clear_and_set_word().
+a selected set of PCI Express Capability Registers:
+
+* Link Control Register
+* Root Control Register
+* Link Control 2 Register
+
+Any change to those registers should be performed using RMW accessors to
+avoid problems due to concurrent updates. For the up-to-date list of
+protected registers, see pcie_capability_clear_and_set_word().

Documentation/PCI/tph.rst

@@ -0,0 +1,132 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+
+===========
+TPH Support
+===========
+
+:Copyright: 2024 Advanced Micro Devices, Inc.
+:Authors: - Eric van Tassell <[email protected]>
+          - Wei Huang <[email protected]>
+
+
+Overview
+========
+
+TPH (TLP Processing Hints) is a PCIe feature that allows endpoint devices
+to provide optimization hints for requests that target memory space.
+These hints, in a format called Steering Tags (STs), are embedded in the
+requester's TLP headers, enabling the system hardware, such as the Root
+Complex, to better manage platform resources for these requests.
+
+For example, on platforms with TPH-based direct data cache injection
+support, an endpoint device can include appropriate STs in its DMA
+traffic to specify which cache the data should be written to. This allows
+the CPU core to have a higher probability of getting data from cache,
+potentially improving performance and reducing latency in data
+processing.
+
+
+How to Use TPH
+==============
+
+TPH is presented as an optional extended capability in PCIe. The Linux
+kernel handles TPH discovery during boot, but it is up to the device
+driver to request TPH enablement if it is to be utilized. Once enabled,
+the driver uses the provided API to obtain the Steering Tag for the
+target memory and to program the ST into the device's ST table.
+
+Enable TPH support in Linux
+---------------------------
+
+To support TPH, the kernel must be built with the CONFIG_PCIE_TPH option
+enabled.
+
+Manage TPH
+----------
+
+To enable TPH for a device, use the following function::
+
+  int pcie_enable_tph(struct pci_dev *pdev, int mode);
+
+This function enables TPH support for device with a specific ST mode.
+Current supported modes include:
+
+  * PCI_TPH_ST_NS_MODE - NO ST Mode
+  * PCI_TPH_ST_IV_MODE - Interrupt Vector Mode
+  * PCI_TPH_ST_DS_MODE - Device Specific Mode
+
+`pcie_enable_tph()` checks whether the requested mode is actually
+supported by the device before enabling. The device driver can figure out
+which TPH mode is supported and can be properly enabled based on the
+return value of `pcie_enable_tph()`.
+
+To disable TPH, use the following function::
+
+  void pcie_disable_tph(struct pci_dev *pdev);
+
+Manage ST
+---------
+
+Steering Tags are platform specific. PCIe spec does not specify where STs
+are from. Instead PCI Firmware Specification defines an ACPI _DSM method
+(see the `Revised _DSM for Cache Locality TPH Features ECN
+<https://members.pcisig.com/wg/PCI-SIG/document/15470>`_) for retrieving
+STs for a target memory of various properties. This method is what is
+supported in this implementation.
+
+To retrieve a Steering Tag for a target memory associated with a specific
+CPU, use the following function::
+
+  int pcie_tph_get_cpu_st(struct pci_dev *pdev, enum tph_mem_type type,
+                          unsigned int cpu_uid, u16 *tag);
+
+The `type` argument is used to specify the memory type, either volatile
+or persistent, of the target memory. The `cpu_uid` argument specifies the
+CPU where the memory is associated to.
+
+After the ST value is retrieved, the device driver can use the following
+function to write the ST into the device::
+
+  int pcie_tph_set_st_entry(struct pci_dev *pdev, unsigned int index,
+                            u16 tag);
+
+The `index` argument is the ST table entry index the ST tag will be
+written into. `pcie_tph_set_st_entry()` will figure out the proper
+location of ST table, either in the MSI-X table or in the TPH Extended
+Capability space, and write the Steering Tag into the ST entry pointed by
+the `index` argument.
+
+It is completely up to the driver to decide how to use these TPH
+functions. For example a network device driver can use the TPH APIs above
+to update the Steering Tag when interrupt affinity of a RX/TX queue has
+been changed. Here is a sample code for IRQ affinity notifier:
+
+.. code-block:: c
+
+    static void irq_affinity_notified(struct irq_affinity_notify *notify,
+                                      const cpumask_t *mask)
+    {
+         struct drv_irq *irq;
+         unsigned int cpu_id;
+         u16 tag;
+
+         irq = container_of(notify, struct drv_irq, affinity_notify);
+         cpumask_copy(irq->cpu_mask, mask);
+
+         /* Pick a right CPU as the target - here is just an example */
+         cpu_id = cpumask_first(irq->cpu_mask);
+
+         if (pcie_tph_get_cpu_st(irq->pdev, TPH_MEM_TYPE_VM, cpu_id,
+                                 &tag))
+             return;
+
+         if (pcie_tph_set_st_entry(irq->pdev, irq->msix_nr, tag))
+             return;
+    }
+
+Disable TPH system-wide
+-----------------------
+
+There is a kernel command line option available to control TPH feature:
+    * "notph": TPH will be disabled for all endpoint devices.

Documentation/admin-guide/kernel-parameters.txt

@@ -4686,6 +4686,10 @@
 		nomio		[S390] Do not use MIO instructions.
 		norid		[S390] ignore the RID field and force use of
 				one PCI domain per PCI function
+		notph		[PCIE] If the PCIE_TPH kernel config parameter
+				is enabled, this kernel boot option can be used
+				to disable PCIe TLP Processing Hints support
+				system-wide.
 
 	pcie_aspm=	[PCIE] Forcibly enable or ignore PCIe Active State Power
 			Management.

Documentation/devicetree/bindings/pci/mediatek-pcie-gen3.yaml

@@ -149,7 +149,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -178,7 +178,7 @@ allOf:
     then:
       properties:
         clocks:
-          minItems: 4
+          minItems: 6
 
         clock-names:
           items:
@@ -207,6 +207,7 @@ allOf:
       properties:
         clocks:
           minItems: 4
+          maxItems: 4
 
         clock-names:
           items:

Documentation/devicetree/bindings/pci/microchip,pcie-host.yaml

@@ -17,6 +17,12 @@ properties:
   compatible:
     const: microchip,pcie-host-1.0 # PolarFire
 
+  reg:
+    minItems: 3
+
+  reg-names:
+    minItems: 3
+
   clocks:
     description:
       Fabric Interface Controllers, FICs, are the interface between the FPGA
@@ -62,8 +68,9 @@ examples:
             pcie0: pcie@2030000000 {
                     compatible = "microchip,pcie-host-1.0";
                     reg = <0x0 0x70000000 0x0 0x08000000>,
-                          <0x0 0x43000000 0x0 0x00010000>;
-                    reg-names = "cfg", "apb";
+                          <0x0 0x43008000 0x0 0x00002000>,
+                          <0x0 0x4300a000 0x0 0x00002000>;
+                    reg-names = "cfg", "bridge", "ctrl";
                     device_type = "pci";
                     #address-cells = <3>;
                     #size-cells = <2>;

Documentation/devicetree/bindings/pci/plda,xpressrich3-axi-common.yaml

@@ -18,12 +18,18 @@ allOf:
 
 properties:
   reg:
-    maxItems: 2
+    maxItems: 3
+    minItems: 2
 
   reg-names:
-    items:
-      - const: cfg
-      - const: apb
+    oneOf:
+      - items:
+          - const: cfg
+          - const: apb
+      - items:
+          - const: cfg
+          - const: bridge
+          - const: ctrl
 
   interrupts:
     minItems: 1

Documentation/devicetree/bindings/pci/qcom,pcie-common.yaml

@@ -81,6 +81,10 @@ properties:
   vddpe-3v3-supply:
     description: PCIe endpoint power supply
 
+  operating-points-v2: true
+  opp-table:
+    type: object
+
 required:
   - reg
   - reg-names