Merge tag 'drm-misc-next-2025-06-12' of https://gitlab.freedesktop.org/drm/misc/kernel into drm-next

drm-misc-next for 6.17:

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
 - atomic-helpers: Tune the enable / disable sequence
 - bridge: Add destroy hook
 - color management: Add helpers for hardware gamma LUT handling
 - HDMI: Add CEC handling, YUV420 output support
 - sched: tracing improvements

Driver Changes:
 - hyperv: Move out of simple-kms, drm_panic support
 - i915: drm_panel_follower support
 - imx: Add IMX8qxq Display Controller Support
 - lima: Add Rockchip RK3528 GPU Support
 - nouveau: fence handling cleanup
 - panfrost: Add BO labeling, 64-bit registers access
 - qaic: Add RAS Support
 - rz-du: Add RZ/V2H(P) Support, MIPI-DSI DCS Support
 - sun4i: Add H616 Support
 - tidss: Add TI AM62L Support
 - vkms: YUV and R* formats support

 - bridges:
   - Switched to reference counted drm_bridge allocations

 - panels:
   - Switched to reference counted drm_panel allocations
   - Add support for fwnode-based panel lookup
   - himax-hx8394: Support for Huiling hl055fhv028c
   - ilitek-ili9881c: Support for 7" Raspberry Pi 720x1280
   - panel-edp: Support for KDC KD116N3730A05, N160JCE-ELL CMN,
   - panel-simple: Support for AUO P238HAN01
   - st7701: Support for Winstar wf40eswaa6mnn0
   - visionox-rm69299: Support for rm69299-shift
   - New panels: Renesas R61307, Renesas R69328

Signed-off-by: Dave Airlie <[email protected]>

From: Maxime Ripard <[email protected]>
Link: https://lore.kernel.org/r/20250612-coucal-of-impossible-cleaning-a5eecf@houat

Author: airlied

Documentation/ABI/testing/sysfs-driver-qaic

@@ -0,0 +1,18 @@
+What:		/sys/bus/pci/drivers/qaic/XXXX:XX:XX.X/ce_count
+Date:		May 2025
+KernelVersion:	6.17
+Contact:	[email protected]
+Description:	Number of correctable errors received from device since driver is loaded.
+
+What:		/sys/bus/pci/drivers/qaic/XXXX:XX:XX.X/ue_count
+Date:		May 2025
+KernelVersion:	6.17
+Contact:	[email protected]
+Description:	Number of uncorrectable errors received from device since driver is loaded.
+
+What:		/sys/bus/pci/drivers/qaic/XXXX:XX:XX.X/ue_nonfatal_count
+Date:		May 2025
+KernelVersion:	6.17
+Contact:	[email protected]
+Description:	Number of uncorrectable non-fatal errors received from device since driver
+		is loaded.

Documentation/devicetree/bindings/display/allwinner,sun8i-a83t-de2-mixer.yaml

@@ -24,9 +24,11 @@ properties:
       - allwinner,sun50i-a64-de2-mixer-0
       - allwinner,sun50i-a64-de2-mixer-1
       - allwinner,sun50i-h6-de3-mixer-0
+      - allwinner,sun50i-h616-de33-mixer-0
 
-  reg:
-    maxItems: 1
+  reg: true
+
+  reg-names: true
 
   clocks:
     items:
@@ -61,6 +63,34 @@ properties:
     required:
       - port@1
 
+allOf:
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - allwinner,sun50i-h616-de33-mixer-0
+    then:
+      properties:
+        reg:
+          description: |
+            Registers for controlling individual layers of the display
+            engine (layers), global control (top), and display blending
+            control (display). Names are from Allwinner BSP kernel.
+          maxItems: 3
+        reg-names:
+          items:
+            - const: layers
+            - const: top
+            - const: display
+      required:
+        - reg-names
+
+    else:
+      properties:
+        reg:
+          maxItems: 1
+
 required:
   - compatible
   - reg

Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml

@@ -0,0 +1,57 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-axi-performance-counter.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller AXI Performance Counter
+
+description: |
+  Performance counters are provided to allow measurement of average bandwidth
+  and latency during operation. The following features are supported:
+
+  * Manual and timer controlled measurement mode.
+
+  * Measurement counters:
+    - GLOBAL_COUNTER for overall measurement time
+    - BUSY_COUNTER for number of data bus busy cycles
+    - DATA_COUNTER for number of data transfer cycles
+    - TRANSFER_COUNTER for number of transfers
+    - ADDRBUSY_COUNTER for number of address bus busy cycles
+    - LATENCY_COUNTER for average latency
+
+  * Counter overflow detection.
+
+  * Outstanding Transfer Counters (OTC) which are used for latency measurement
+    have to run immediately after reset, but can be disabled by software when
+    there is no need for latency measurement.
+
+maintainers:
+  - Liu Ying <[email protected]>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-axi-performance-counter
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/imx8-lpcg.h>
+
+    pmu@5618f000 {
+        compatible = "fsl,imx8qxp-dc-axi-performance-counter";
+        reg = <0x5618f000 0x90>;
+        clocks = <&dc0_lpcg IMX_LPCG_CLK_5>;
+    };

Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blit-engine.yaml

@@ -0,0 +1,204 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blit-engine.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Blit Engine
+
+description: |
+  A blit operation (block based image transfer) reads up to 3 source images
+  from memory and computes one destination image from it, which is written
+  back to memory. The following basic operations are supported:
+
+  * Buffer Fill
+    Fills a buffer with constant color
+
+  * Buffer Copy
+    Copies one source to a destination buffer.
+
+  * Image Blend
+    Combines two source images by a blending equation and writes result to
+    destination (which can be one of the sources).
+
+  * Image Rop2/3
+    Combines up to three source images by a logical equation (raster operation)
+    and writes result to destination (which can be one of the sources).
+
+  * Image Flip
+    Mirrors the source image in horizontal and/or vertical direction.
+
+  * Format Convert
+    Convert between the supported color and buffer formats.
+
+  * Color Transform
+    Modify colors by linear or non-linear transformations.
+
+  * Image Scale
+    Changes size of the source image.
+
+  * Image Rotate
+    Rotates the source image by any angle.
+
+  * Image Filter
+    Performs an FIR filter operation on the source image.
+
+  * Image Warp
+    Performs a re-sampling of the source image with any pattern. The sample
+    point positions are read from a compressed coordinate buffer.
+
+  * Buffer Pack
+    Writes an image with color components stored in up to three different
+    buffers (planar formats) into a single buffer (packed format).
+
+  * Chroma Resample
+    Converts between different YUV formats that differ in chroma sampling rate
+    (4:4:4, 4:2:2, 4:2:0).
+
+maintainers:
+  - Liu Ying <[email protected]>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-blit-engine
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+  "#address-cells":
+    const: 1
+
+  "#size-cells":
+    const: 1
+
+  ranges: true
+
+patternProperties:
+  "^blitblend@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-blitblend
+
+  "^clut@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-clut
+
+  "^fetchdecode@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetchdecode
+
+  "^fetcheco@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetcheco
+
+  "^fetchwarp@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-fetchwarp
+
+  "^filter@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-filter
+
+  "^hscaler@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-hscaler
+
+  "^matrix@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-matrix
+
+  "^rop@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-rop
+
+  "^store@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-store
+
+  "^vscaler@[0-9a-f]+$":
+    type: object
+    additionalProperties: true
+
+    properties:
+      compatible:
+        const: fsl,imx8qxp-dc-vscaler
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - "#address-cells"
+  - "#size-cells"
+  - ranges
+
+additionalProperties: false
+
+examples:
+  - |
+    blit-engine@56180820 {
+        compatible = "fsl,imx8qxp-dc-blit-engine";
+        reg = <0x56180820 0x13c>, <0x56181000 0x3400>;
+        reg-names = "pec", "cfg";
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges;
+
+        fetchdecode@56180820 {
+            compatible = "fsl,imx8qxp-dc-fetchdecode";
+            reg = <0x56180820 0x10>, <0x56181000 0x404>;
+            reg-names = "pec", "cfg";
+        };
+
+        store@56180940 {
+            compatible = "fsl,imx8qxp-dc-store";
+            reg = <0x56180940 0x1c>, <0x56184000 0x5c>;
+            reg-names = "pec", "cfg";
+            interrupt-parent = <&dc0_intc>;
+            interrupts = <0>, <1>, <2>;
+            interrupt-names = "shdload", "framecomplete", "seqcomplete";
+        };
+    };

Documentation/devicetree/bindings/display/imx/fsl,imx8qxp-dc-blitblend.yaml

@@ -0,0 +1,41 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/display/imx/fsl,imx8qxp-dc-blitblend.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Freescale i.MX8qxp Display Controller Blit Blend Unit
+
+description:
+  Combines two input frames to a single output frame, all frames having the
+  same dimension.
+
+maintainers:
+  - Liu Ying <[email protected]>
+
+properties:
+  compatible:
+    const: fsl,imx8qxp-dc-blitblend
+
+  reg:
+    maxItems: 2
+
+  reg-names:
+    items:
+      - const: pec
+      - const: cfg
+
+required:
+  - compatible
+  - reg
+  - reg-names
+
+additionalProperties: false
+
+examples:
+  - |
+    blitblend@56180920 {
+        compatible = "fsl,imx8qxp-dc-blitblend";
+        reg = <0x56180920 0x10>, <0x56183c00 0x3c>;
+        reg-names = "pec", "cfg";
+    };