tools/power turbostat: Remove SysWatt from DISABLED_BY_DEFAULT

The counter is present on most supporting Intel platforms and provides
useful data to the user. There is no reason to disable the counter by
default.

Signed-off-by: Patryk Wlazlyn <[email protected]>
Signed-off-by: Len Brown <[email protected]>

Author: Patryk Wlazlyn

tools/power/x86/turbostat/turbostat.8

@@ -190,7 +190,7 @@ The system configuration dump (if --quiet is not used) is followed by statistics
 .PP
 \fBRAMWatt\fP Watts consumed by the DRAM DIMMS -- available only on server processors.
 .PP
-\fBSysWatt\fP Watts consumed by the whole platform (RAPL PSYS). Disabled by default.  Enable with --enable SysWatt.
+\fBSysWatt\fP Watts consumed by the whole platform (RAPL PSYS).
 .PP
 \fBPKG_%\fP percent of the interval that RAPL throttling was active on the Package.  Note that the system summary is the sum of the package throttling time, and thus may be higher than 100% on a multi-package system.  Note that the meaning of this field is model specific.  For example, some hardware increments this counter when RAPL responds to thermal limits, but does not increment this counter when RAPL responds to power limits.  Comparing PkgWatt and PkgTmp to system limits is necessary.
 .PP

tools/power/x86/turbostat/turbostat.c

@@ -270,12 +270,12 @@ struct msr_counter bic[] = {
 #define	BIC_NMI			(1ULL << 61)
 
 #define BIC_TOPOLOGY (BIC_Package | BIC_Node | BIC_CoreCnt | BIC_PkgCnt | BIC_Core | BIC_CPU | BIC_Die )
-#define BIC_THERMAL_PWR ( BIC_CoreTmp | BIC_PkgTmp | BIC_PkgWatt | BIC_CorWatt | BIC_GFXWatt | BIC_RAMWatt | BIC_PKG__ | BIC_RAM__)
+#define BIC_THERMAL_PWR ( BIC_CoreTmp | BIC_PkgTmp | BIC_PkgWatt | BIC_CorWatt | BIC_GFXWatt | BIC_RAMWatt | BIC_PKG__ | BIC_RAM__ | BIC_SysWatt)
 #define BIC_FREQUENCY (BIC_Avg_MHz | BIC_Busy | BIC_Bzy_MHz | BIC_TSC_MHz | BIC_GFXMHz | BIC_GFXACTMHz | BIC_SAMMHz | BIC_SAMACTMHz | BIC_UNCORE_MHZ)
 #define BIC_IDLE (BIC_Busy | BIC_sysfs | BIC_CPU_c1 | BIC_CPU_c3 | BIC_CPU_c6 | BIC_CPU_c7 | BIC_GFX_rc6 | BIC_Pkgpc2 | BIC_Pkgpc3 | BIC_Pkgpc6 | BIC_Pkgpc7 | BIC_Pkgpc8 | BIC_Pkgpc9 | BIC_Pkgpc10 | BIC_CPU_LPI | BIC_SYS_LPI | BIC_Mod_c6 | BIC_Totl_c0 | BIC_Any_c0 | BIC_GFX_c0 | BIC_CPUGFX | BIC_SAM_mc6 | BIC_Diec6)
 #define BIC_OTHER ( BIC_IRQ | BIC_NMI | BIC_SMI | BIC_ThreadC | BIC_CoreTmp | BIC_IPC)
 
-#define BIC_DISABLED_BY_DEFAULT	(BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC | BIC_SysWatt | BIC_Sys_J)
+#define BIC_DISABLED_BY_DEFAULT	(BIC_USEC | BIC_TOD | BIC_APIC | BIC_X2APIC)
 
 unsigned long long bic_enabled = (0xFFFFFFFFFFFFFFFFULL & ~BIC_DISABLED_BY_DEFAULT);
 unsigned long long bic_present = BIC_USEC | BIC_TOD | BIC_sysfs | BIC_APIC | BIC_X2APIC;