usb: dwc3: core: update LC timer as per USB Spec V3.2

This fix addresses STAR 9001285599, which only affects DWC_usb3 version
3.20a. The timer value for PM_LC_TIMER in DWC_usb3 3.20a for the Link
ECN changes is incorrect. If the PM TIMER ECN is enabled via GUCTL2[19],
the link compliance test (TD7.21) may fail. If the ECN is not enabled
(GUCTL2[19] = 0), the controller will use the old timer value (5us),
which is still acceptable for the link compliance test. Therefore, clear
GUCTL2[19] to pass the USB link compliance test: TD 7.21.

Cc: [email protected]
Signed-off-by: Faisal Hassan <[email protected]>
Acked-by: Thinh Nguyen <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>

Author: Faisal Hassan

drivers/usb/dwc3/core.c

@@ -1386,6 +1386,21 @@ static int dwc3_core_init(struct dwc3 *dwc)
 		dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
 	}
 
+	/*
+	 * STAR 9001285599: This issue affects DWC_usb3 version 3.20a
+	 * only. If the PM TIMER ECM is enabled through GUCTL2[19], the
+	 * link compliance test (TD7.21) may fail. If the ECN is not
+	 * enabled (GUCTL2[19] = 0), the controller will use the old timer
+	 * value (5us), which is still acceptable for the link compliance
+	 * test. Therefore, do not enable PM TIMER ECM in 3.20a by
+	 * setting GUCTL2[19] by default; instead, use GUCTL2[19] = 0.
+	 */
+	if (DWC3_VER_IS(DWC3, 320A)) {
+		reg = dwc3_readl(dwc->regs, DWC3_GUCTL2);
+		reg &= ~DWC3_GUCTL2_LC_TIMER;
+		dwc3_writel(dwc->regs, DWC3_GUCTL2, reg);
+	}
+
 	/*
 	 * When configured in HOST mode, after issuing U3/L2 exit controller
 	 * fails to send proper CRC checksum in CRC5 feild. Because of this

drivers/usb/dwc3/core.h

@@ -421,6 +421,7 @@
 
 /* Global User Control Register 2 */
 #define DWC3_GUCTL2_RST_ACTBITLATER		BIT(14)
+#define DWC3_GUCTL2_LC_TIMER			BIT(19)
 
 /* Global User Control Register 3 */
 #define DWC3_GUCTL3_SPLITDISABLE		BIT(14)
@@ -1269,6 +1270,7 @@ struct dwc3 {
 #define DWC3_REVISION_290A	0x5533290a
 #define DWC3_REVISION_300A	0x5533300a
 #define DWC3_REVISION_310A	0x5533310a
+#define DWC3_REVISION_320A	0x5533320a
 #define DWC3_REVISION_330A	0x5533330a
 
 #define DWC31_REVISION_ANY	0x0