Merge tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel

Pull drm fixes from Dave Airlie:
 "Happy New Year.

  It was fairly quiet for holidays period, certainly nothing that worth
  getting off the couch before I needed to, this is for the past two
  weeks, i915, xe and some adv7511, I expect we will see some amdgpu etc
  happening next week, but otherwise all quiet.

  i915:
   - Fix C10 pll programming sequence [cx0_phy]
   - Fix power gate sequence. [dg1]

  xe:
   - uapi: Revert some devcoredump file format changes breaking a mesa
     debug tool
   - Fixes around waits when moving to system
   - Fix a typo when checking for LMEM provisioning
   - Fix a fault on fd close after unbind
   - A couple of OA fixes squashed for stable backporting

  adv7511:
   - fix UAF
   - drop single lane support
   - audio infoframe fix"

* tag 'drm-fixes-2025-01-03' of https://gitlab.freedesktop.org/drm/kernel:
  xe/oa: Fix query mode of operation for OAR/OAC
  drm/i915/dg1: Fix power gate sequence.
  drm/i915/cx0_phy: Fix C10 pll programming sequence
  drm/xe: Fix fault on fd close after unbind
  drm/xe/pf: Use correct function to check LMEM provisioning
  drm/xe: Wait for migration job before unmapping pages
  drm/xe: Use non-interruptible wait when moving BO to system
  drm/xe: Revert some changes that break a mesa debug tool
  drm: adv7511: Drop dsi single lane support
  dt-bindings: display: adi,adv7533: Drop single lane support
  drm: adv7511: Fix use-after-free in adv7533_attach_dsi()
  drm/bridge: adv7511_audio: Update Audio InfoFrame properly

Author: torvalds

Documentation/devicetree/bindings/display/bridge/adi,adv7533.yaml

@@ -90,7 +90,7 @@ properties:
   adi,dsi-lanes:
     description: Number of DSI data lanes connected to the DSI host.
     $ref: /schemas/types.yaml#/definitions/uint32
-    enum: [ 1, 2, 3, 4 ]
+    enum: [ 2, 3, 4 ]
 
   "#sound-dai-cells":
     const: 0

drivers/gpu/drm/bridge/adv7511/adv7511_audio.c

@@ -153,7 +153,16 @@ static int adv7511_hdmi_hw_params(struct device *dev, void *data,
 			   ADV7511_AUDIO_CFG3_LEN_MASK, len);
 	regmap_update_bits(adv7511->regmap, ADV7511_REG_I2C_FREQ_ID_CFG,
 			   ADV7511_I2C_FREQ_ID_CFG_RATE_MASK, rate << 4);
-	regmap_write(adv7511->regmap, 0x73, 0x1);
+
+	/* send current Audio infoframe values while updating */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
+			   BIT(5), BIT(5));
+
+	regmap_write(adv7511->regmap, ADV7511_REG_AUDIO_INFOFRAME(0), 0x1);
+
+	/* use Audio infoframe updated info */
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
+			   BIT(5), 0);
 
 	return 0;
 }
@@ -184,8 +193,9 @@ static int audio_startup(struct device *dev, void *data)
 	regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(0),
 				BIT(7) | BIT(6), BIT(7));
 	/* use Audio infoframe updated info */
-	regmap_update_bits(adv7511->regmap, ADV7511_REG_GC(1),
+	regmap_update_bits(adv7511->regmap, ADV7511_REG_INFOFRAME_UPDATE,
 				BIT(5), 0);
+
 	/* enable SPDIF receiver */
 	if (adv7511->audio_source == ADV7511_AUDIO_SOURCE_SPDIF)
 		regmap_update_bits(adv7511->regmap, ADV7511_REG_AUDIO_CONFIG,

drivers/gpu/drm/bridge/adv7511/adv7511_drv.c

@@ -1241,8 +1241,10 @@ static int adv7511_probe(struct i2c_client *i2c)
 		return ret;
 
 	ret = adv7511_init_regulators(adv7511);
-	if (ret)
-		return dev_err_probe(dev, ret, "failed to init regulators\n");
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to init regulators\n");
+		goto err_of_node_put;
+	}
 
 	/*
 	 * The power down GPIO is optional. If present, toggle it from active to
@@ -1363,6 +1365,8 @@ static int adv7511_probe(struct i2c_client *i2c)
 	i2c_unregister_device(adv7511->i2c_edid);
 uninit_regulators:
 	adv7511_uninit_regulators(adv7511);
+err_of_node_put:
+	of_node_put(adv7511->host_node);
 
 	return ret;
 }
@@ -1371,6 +1375,8 @@ static void adv7511_remove(struct i2c_client *i2c)
 {
 	struct adv7511 *adv7511 = i2c_get_clientdata(i2c);
 
+	of_node_put(adv7511->host_node);
+
 	adv7511_uninit_regulators(adv7511);
 
 	drm_bridge_remove(&adv7511->bridge);

drivers/gpu/drm/bridge/adv7511/adv7533.c

@@ -172,7 +172,7 @@ int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
 
 	of_property_read_u32(np, "adi,dsi-lanes", &num_lanes);
 
-	if (num_lanes < 1 || num_lanes > 4)
+	if (num_lanes < 2 || num_lanes > 4)
 		return -EINVAL;
 
 	adv->num_dsi_lanes = num_lanes;
@@ -181,8 +181,6 @@ int adv7533_parse_dt(struct device_node *np, struct adv7511 *adv)
 	if (!adv->host_node)
 		return -ENODEV;
 
-	of_node_put(adv->host_node);
-
 	adv->use_timing_gen = !of_property_read_bool(np,
 						"adi,disable-timing-generator");
 

drivers/gpu/drm/i915/display/intel_cx0_phy.c

@@ -2115,14 +2115,6 @@ static void intel_c10_pll_program(struct intel_display *display,
 		      0, C10_VDR_CTRL_MSGBUS_ACCESS,
 		      MB_WRITE_COMMITTED);
 
-	/* Custom width needs to be programmed to 0 for both the phy lanes */
-	intel_cx0_rmw(encoder, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CUSTOM_WIDTH,
-		      C10_VDR_CUSTOM_WIDTH_MASK, C10_VDR_CUSTOM_WIDTH_8_10,
-		      MB_WRITE_COMMITTED);
-	intel_cx0_rmw(encoder, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CONTROL(1),
-		      0, C10_VDR_CTRL_UPDATE_CFG,
-		      MB_WRITE_COMMITTED);
-
 	/* Program the pll values only for the master lane */
 	for (i = 0; i < ARRAY_SIZE(pll_state->pll); i++)
 		intel_cx0_write(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_PLL(i),
@@ -2132,6 +2124,10 @@ static void intel_c10_pll_program(struct intel_display *display,
 	intel_cx0_write(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_CMN(0), pll_state->cmn, MB_WRITE_COMMITTED);
 	intel_cx0_write(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_TX(0), pll_state->tx, MB_WRITE_COMMITTED);
 
+	/* Custom width needs to be programmed to 0 for both the phy lanes */
+	intel_cx0_rmw(encoder, INTEL_CX0_BOTH_LANES, PHY_C10_VDR_CUSTOM_WIDTH,
+		      C10_VDR_CUSTOM_WIDTH_MASK, C10_VDR_CUSTOM_WIDTH_8_10,
+		      MB_WRITE_COMMITTED);
 	intel_cx0_rmw(encoder, INTEL_CX0_LANE0, PHY_C10_VDR_CONTROL(1),
 		      0, C10_VDR_CTRL_MASTER_LANE | C10_VDR_CTRL_UPDATE_CFG,
 		      MB_WRITE_COMMITTED);

drivers/gpu/drm/i915/gt/intel_rc6.c

@@ -133,7 +133,7 @@ static void gen11_rc6_enable(struct intel_rc6 *rc6)
 			GEN9_MEDIA_PG_ENABLE |
 			GEN11_MEDIA_SAMPLER_PG_ENABLE;
 
-	if (GRAPHICS_VER(gt->i915) >= 12) {
+	if (GRAPHICS_VER(gt->i915) >= 12 && !IS_DG1(gt->i915)) {
 		for (i = 0; i < I915_MAX_VCS; i++)
 			if (HAS_ENGINE(gt, _VCS(i)))
 				pg_enable |= (VDN_HCP_POWERGATE_ENABLE(i) |

drivers/gpu/drm/xe/xe_bo.c

@@ -724,7 +724,7 @@ static int xe_bo_move(struct ttm_buffer_object *ttm_bo, bool evict,
 	    new_mem->mem_type == XE_PL_SYSTEM) {
 		long timeout = dma_resv_wait_timeout(ttm_bo->base.resv,
 						     DMA_RESV_USAGE_BOOKKEEP,
-						     true,
+						     false,
 						     MAX_SCHEDULE_TIMEOUT);
 		if (timeout < 0) {
 			ret = timeout;
@@ -848,8 +848,16 @@ static int xe_bo_move(struct ttm_buffer_object *ttm_bo, bool evict,
 
 out:
 	if ((!ttm_bo->resource || ttm_bo->resource->mem_type == XE_PL_SYSTEM) &&
-	    ttm_bo->ttm)
+	    ttm_bo->ttm) {
+		long timeout = dma_resv_wait_timeout(ttm_bo->base.resv,
+						     DMA_RESV_USAGE_KERNEL,
+						     false,
+						     MAX_SCHEDULE_TIMEOUT);
+		if (timeout < 0)
+			ret = timeout;
+
 		xe_tt_unmap_sg(ttm_bo->ttm);
+	}
 
 	return ret;
 }

drivers/gpu/drm/xe/xe_devcoredump.c

@@ -109,7 +109,11 @@ static ssize_t __xe_devcoredump_read(char *buffer, size_t count,
 	drm_puts(&p, "\n**** GuC CT ****\n");
 	xe_guc_ct_snapshot_print(ss->guc.ct, &p);
 
-	drm_puts(&p, "\n**** Contexts ****\n");
+	/*
+	 * Don't add a new section header here because the mesa debug decoder
+	 * tool expects the context information to be in the 'GuC CT' section.
+	 */
+	/* drm_puts(&p, "\n**** Contexts ****\n"); */
 	xe_guc_exec_queue_snapshot_print(ss->ge, &p);
 
 	drm_puts(&p, "\n**** Job ****\n");
@@ -363,6 +367,15 @@ void xe_print_blob_ascii85(struct drm_printer *p, const char *prefix,
 	char buff[ASCII85_BUFSZ], *line_buff;
 	size_t line_pos = 0;
 
+	/*
+	 * Splitting blobs across multiple lines is not compatible with the mesa
+	 * debug decoder tool. Note that even dropping the explicit '\n' below
+	 * doesn't help because the GuC log is so big some underlying implementation
+	 * still splits the lines at 512K characters. So just bail completely for
+	 * the moment.
+	 */
+	return;
+
 #define DMESG_MAX_LINE_LEN	800
 #define MIN_SPACE		(ASCII85_BUFSZ + 2)		/* 85 + "\n\0" */
 

drivers/gpu/drm/xe/xe_exec_queue.c

@@ -8,6 +8,7 @@
 #include <linux/nospec.h>
 
 #include <drm/drm_device.h>
+#include <drm/drm_drv.h>
 #include <drm/drm_file.h>
 #include <uapi/drm/xe_drm.h>
 
@@ -762,9 +763,11 @@ bool xe_exec_queue_is_idle(struct xe_exec_queue *q)
  */
 void xe_exec_queue_update_run_ticks(struct xe_exec_queue *q)
 {
+	struct xe_device *xe = gt_to_xe(q->gt);
 	struct xe_file *xef;
 	struct xe_lrc *lrc;
 	u32 old_ts, new_ts;
+	int idx;
 
 	/*
 	 * Jobs that are run during driver load may use an exec_queue, but are
@@ -774,6 +777,10 @@ void xe_exec_queue_update_run_ticks(struct xe_exec_queue *q)
 	if (!q->vm || !q->vm->xef)
 		return;
 
+	/* Synchronize with unbind while holding the xe file open */
+	if (!drm_dev_enter(&xe->drm, &idx))
+		return;
+
 	xef = q->vm->xef;
 
 	/*
@@ -787,6 +794,8 @@ void xe_exec_queue_update_run_ticks(struct xe_exec_queue *q)
 	lrc = q->lrc[0];
 	new_ts = xe_lrc_update_timestamp(lrc, &old_ts);
 	xef->run_ticks[q->class] += (new_ts - old_ts) * q->width;
+
+	drm_dev_exit(idx);
 }
 
 /**

drivers/gpu/drm/xe/xe_gt_sriov_pf_config.c

@@ -2046,7 +2046,7 @@ static int pf_validate_vf_config(struct xe_gt *gt, unsigned int vfid)
 	valid_any = valid_any || (valid_ggtt && is_primary);
 
 	if (IS_DGFX(xe)) {
-		bool valid_lmem = pf_get_vf_config_ggtt(primary_gt, vfid);
+		bool valid_lmem = pf_get_vf_config_lmem(primary_gt, vfid);
 
 		valid_any = valid_any || (valid_lmem && is_primary);
 		valid_all = valid_all && valid_lmem;