spi: dt-bindings: Document the RZ/V2H(P) RSPI

Add dt-bindings for the RSPI IP found inside the Renesas RZ/V2H(P)
SoC.

Signed-off-by: Fabrizio Castro <[email protected]>
Reviewed-by: Rob Herring (Arm) <[email protected]>
Reviewed-by: Geert Uytterhoeven <[email protected]>

Link: https://patch.msgid.link/[email protected]
Signed-off-by: Mark Brown <[email protected]>

Author: Fabrizio Castro

Documentation/devicetree/bindings/spi/renesas,rzv2h-rspi.yaml

@@ -0,0 +1,96 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/spi/renesas,rzv2h-rspi.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Renesas RZ/V2H(P) Renesas Serial Peripheral Interface (RSPI)
+
+maintainers:
+  - Fabrizio Castro <[email protected]>
+
+allOf:
+  - $ref: spi-controller.yaml#
+
+properties:
+  compatible:
+    const: renesas,r9a09g057-rspi # RZ/V2H(P)
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    items:
+      - description: Idle Interrupt
+      - description: Error Interrupt
+      - description: Communication End Interrupt
+      - description: Receive Buffer Full Interrupt
+      - description: Transmit Buffer Empty Interrupt
+
+  interrupt-names:
+    items:
+      - const: idle
+      - const: error
+      - const: end
+      - const: rx
+      - const: tx
+
+  clocks:
+    maxItems: 3
+
+  clock-names:
+    items:
+      - const: pclk
+      - const: pclk_sfr
+      - const: tclk
+
+  resets:
+    maxItems: 2
+
+  reset-names:
+    items:
+      - const: presetn
+      - const: tresetn
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-names
+  - clocks
+  - clock-names
+  - resets
+  - reset-names
+  - power-domains
+  - '#address-cells'
+  - '#size-cells'
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/clock/renesas-cpg-mssr.h>
+    spi@12800800 {
+        compatible = "renesas,r9a09g057-rspi";
+
+        reg = <0x12800800 0x400>;
+        interrupts = <GIC_SPI 111 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>,
+                     <GIC_SPI 113 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 504 IRQ_TYPE_EDGE_RISING>,
+                     <GIC_SPI 505 IRQ_TYPE_EDGE_RISING>;
+        interrupt-names = "idle", "error", "end", "rx", "tx";
+        clocks = <&cpg CPG_MOD 0x5a>,
+                 <&cpg CPG_MOD 0x5b>,
+                 <&cpg CPG_MOD 0x5c>;
+        clock-names = "pclk", "pclk_sfr", "tclk";
+        resets = <&cpg 0x7f>, <&cpg 0x80>;
+        reset-names = "presetn", "tresetn";
+        power-domains = <&cpg>;
+        #address-cells = <1>;
+        #size-cells = <0>;
+    };