Merge git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf at 6.18-rc2

Cross-merge BPF and other fixes after downstream PR.

No conflicts.

Signed-off-by: Alexei Starovoitov <[email protected]>

Author: Alexei Starovoitov

.mailmap

@@ -227,6 +227,7 @@ Dmitry Safonov <[email protected]> <[email protected]>
 Dmitry Safonov <[email protected]> <[email protected]>
 Dmitry Safonov <[email protected]> <[email protected]>
 Domen Puncer <[email protected]>
+Dong Aisheng <[email protected]> <[email protected]>
 Douglas Gilbert <[email protected]>
 Drew Fustini <[email protected]> <[email protected]>
 <[email protected]> <[email protected]>

Documentation/devicetree/bindings/i2c/apm,xgene-slimpro-i2c.yaml

@@ -0,0 +1,36 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/i2c/apm,xgene-slimpro-i2c.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: APM X-Gene SLIMpro Mailbox I2C
+
+maintainers:
+  - Khuong Dinh <[email protected]>
+
+description:
+  An I2C controller accessed over the "SLIMpro" mailbox.
+
+allOf:
+  - $ref: /schemas/i2c/i2c-controller.yaml#
+
+properties:
+  compatible:
+    const: apm,xgene-slimpro-i2c
+
+  mboxes:
+    maxItems: 1
+
+required:
+  - compatible
+  - mboxes
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        compatible = "apm,xgene-slimpro-i2c";
+        mboxes = <&mailbox 0>;
+    };

Documentation/devicetree/bindings/i2c/i2c-xgene-slimpro.txt

@@ -79,6 +79,7 @@ properties:
               - fsl,imx-audio-nau8822
               - fsl,imx-audio-sgtl5000
               - fsl,imx-audio-si476x
+              - fsl,imx-audio-tlv320
               - fsl,imx-audio-tlv320aic31xx
               - fsl,imx-audio-tlv320aic32x4
               - fsl,imx-audio-wm8524

Documentation/devicetree/bindings/sound/fsl-asoc-card.yaml

@@ -33,6 +33,7 @@ properties:
           - qcom,apq8096-sndcard
           - qcom,glymur-sndcard
           - qcom,qcm6490-idp-sndcard
+          - qcom,qcs615-sndcard
           - qcom,qcs6490-rb3gen2-sndcard
           - qcom,qcs8275-sndcard
           - qcom,qcs9075-sndcard

Documentation/devicetree/bindings/sound/qcom,sm8250.yaml

@@ -24,19 +24,21 @@ description: |
   Instruments Smart Amp speaker protection algorithm. The
   integrated speaker voltage and current sense provides for real time
   monitoring of loudspeaker behavior.
-  The TAS5825/TAS5827 is a stereo, digital input Class-D audio
-  amplifier optimized for efficiently driving high peak power into
-  small loudspeakers. An integrated on-chip DSP supports Texas
-  Instruments Smart Amp speaker protection algorithm.
+  The TAS5802/TAS5815/TAS5825/TAS5827/TAS5828 is a stereo, digital input
+  Class-D audio amplifier optimized for efficiently driving high peak
+  power into small loudspeakers. An integrated on-chip DSP supports
+  Texas Instruments Smart Amp speaker protection algorithm.
 
   Specifications about the audio amplifier can be found at:
     https://www.ti.com/lit/gpn/tas2120
     https://www.ti.com/lit/gpn/tas2320
     https://www.ti.com/lit/gpn/tas2563
     https://www.ti.com/lit/gpn/tas2572
     https://www.ti.com/lit/gpn/tas2781
+    https://www.ti.com/lit/gpn/tas5815
     https://www.ti.com/lit/gpn/tas5825m
     https://www.ti.com/lit/gpn/tas5827
+    https://www.ti.com/lit/gpn/tas5828m
 
 properties:
   compatible:
@@ -65,11 +67,21 @@ properties:
       Protection and Audio Processing, 16/20/24/32bit stereo I2S or
       multichannel TDM.
 
+      ti,tas5802: 22-W, Inductor-Less, Digital Input, Closed-Loop Class-D
+      Audio Amplifier with 96-Khz Extended Processing and Low Idle Power
+      Dissipation.
+
+      ti,tas5815: 30-W, Digital Input, Stereo, Closed-loop Class-D Audio
+      Amplifier with 96 kHz Enhanced Processing
+
       ti,tas5825: 38-W Stereo, Inductor-Less, Digital Input, Closed-Loop 4.5V
       to 26.4V Class-D Audio Amplifier with 192-kHz Extended Audio Processing.
 
-      ti,tas5827: 47-W Stereo, Digital Input, High Efficiency Closed-Loop Class-D
-      Amplifier with Class-H Algorithm
+      ti,tas5827: 47-W Stereo, Digital Input, High Efficiency Closed-Loop
+      Class-D Amplifier with Class-H Algorithm
+
+      ti,tas5828: 50-W Stereo, Digital Input, High Efficiency Closed-Loop
+      Class-D Amplifier with Hybrid-Pro Algorithm
     oneOf:
       - items:
           - enum:
@@ -80,8 +92,11 @@ properties:
               - ti,tas2563
               - ti,tas2570
               - ti,tas2572
+              - ti,tas5802
+              - ti,tas5815
               - ti,tas5825
               - ti,tas5827
+              - ti,tas5828
           - const: ti,tas2781
       - enum:
           - ti,tas2781
@@ -177,12 +192,28 @@ allOf:
             minimum: 0x38
             maximum: 0x3f
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            enum:
+              - ti,tas5802
+              - ti,tas5815
+    then:
+      properties:
+        reg:
+          maxItems: 4
+          items:
+            minimum: 0x54
+            maximum: 0x57
+
   - if:
       properties:
         compatible:
           contains:
             enum:
               - ti,tas5827
+              - ti,tas5828
     then:
       properties:
         reg:

Documentation/devicetree/bindings/sound/ti,tas2781.yaml

@@ -183,10 +183,10 @@ in the place where the name normally goes. The structure is
      - det_checksum
      - Directory leaf block checksum.
 
-The leaf directory block checksum is calculated against the FS UUID, the
-directory's inode number, the directory's inode generation number, and
-the entire directory entry block up to (but not including) the fake
-directory entry.
+The leaf directory block checksum is calculated against the FS UUID (or
+the checksum seed, if that feature is enabled for the fs), the directory's
+inode number, the directory's inode generation number, and the entire
+directory entry block up to (but not including) the fake directory entry.
 
 Hash Tree Directories
 ~~~~~~~~~~~~~~~~~~~~~
@@ -196,37 +196,37 @@ new feature was added to ext3 to provide a faster (but peculiar)
 balanced tree keyed off a hash of the directory entry name. If the
 EXT4_INDEX_FL (0x1000) flag is set in the inode, this directory uses a
 hashed btree (htree) to organize and find directory entries. For
-backwards read-only compatibility with ext2, this tree is actually
-hidden inside the directory file, masquerading as “empty” directory data
-blocks! It was stated previously that the end of the linear directory
-entry table was signified with an entry pointing to inode 0; this is
-(ab)used to fool the old linear-scan algorithm into thinking that the
-rest of the directory block is empty so that it moves on.
+backwards read-only compatibility with ext2, interior tree nodes are actually
+hidden inside the directory file, masquerading as “empty” directory entries
+spanning the whole block. It was stated previously that directory entries
+with the inode set to 0 are treated as unused entries; this is (ab)used to
+fool the old linear-scan algorithm into skipping over those blocks containing
+the interior tree node data.
 
 The root of the tree always lives in the first data block of the
 directory. By ext2 custom, the '.' and '..' entries must appear at the
 beginning of this first block, so they are put here as two
 ``struct ext4_dir_entry_2`` s and not stored in the tree. The rest of
 the root node contains metadata about the tree and finally a hash->block
 map to find nodes that are lower in the htree. If
-``dx_root.info.indirect_levels`` is non-zero then the htree has two
-levels; the data block pointed to by the root node's map is an interior
-node, which is indexed by a minor hash. Interior nodes in this tree
-contains a zeroed out ``struct ext4_dir_entry_2`` followed by a
-minor_hash->block map to find leafe nodes. Leaf nodes contain a linear
-array of all ``struct ext4_dir_entry_2``; all of these entries
-(presumably) hash to the same value. If there is an overflow, the
-entries simply overflow into the next leaf node, and the
-least-significant bit of the hash (in the interior node map) that gets
-us to this next leaf node is set.
-
-To traverse the directory as a htree, the code calculates the hash of
-the desired file name and uses it to find the corresponding block
-number. If the tree is flat, the block is a linear array of directory
-entries that can be searched; otherwise, the minor hash of the file name
-is computed and used against this second block to find the corresponding
-third block number. That third block number will be a linear array of
-directory entries.
+``dx_root.info.indirect_levels`` is non-zero then the htree has that many
+levels and the blocks pointed to by the root node's map are interior nodes.
+These interior nodes have a zeroed out ``struct ext4_dir_entry_2`` followed by
+a hash->block map to find nodes of the next level. Leaf nodes look like
+classic linear directory blocks, but all of its entries have a hash value
+equal or greater than the indicated hash of the parent node.
+
+The actual hash value for an entry name is only 31 bits, the least-significant
+bit is set to 0. However, if there is a hash collision between directory
+entries, the least-significant bit may get set to 1 on interior nodes in the
+case where these two (or more) hash-colliding entries do not fit into one leaf
+node and must be split across multiple nodes.
+
+To look up a name in such a htree, the code calculates the hash of the desired
+file name and uses it to find the leaf node with the range of hash values the
+calculated hash falls into (in other words, a lookup works basically the same
+as it would in a B-Tree keyed by the hash value), and possibly also scanning
+the leaf nodes that follow (in tree order) in case of hash collisions.
 
 To traverse the directory as a linear array (such as the old code does),
 the code simply reads every data block in the directory. The blocks used
@@ -319,7 +319,8 @@ of a data block:
    * - 0x24
      - __le32
      - block
-     - The block number (within the directory file) that goes with hash=0.
+     - The block number (within the directory file) that lead to the left-most
+       leaf node, i.e. the leaf containing entries with the lowest hash values.
    * - 0x28
      - struct dx_entry
      - entries[0]
@@ -442,12 +443,12 @@ The dx_tail structure is 8 bytes long and looks like this:
    * - 0x0
      - u32
      - dt_reserved
-     - Zero.
+     - Unused (but still part of the checksum curiously).
    * - 0x4
      - __le32
      - dt_checksum
      - Checksum of the htree directory block.
 
 The checksum is calculated against the FS UUID, the htree index header
 (dx_root or dx_node), all of the htree indices (dx_entry) that are in
-use, and the tail block (dx_tail).
+use, and the tail block (dx_tail) with the dt_checksum initially set to 0.

Documentation/filesystems/ext4/directory.rst

@@ -1398,10 +1398,9 @@ second bit timing has to be specified in order to enable the CAN FD bitrate.
 Additionally CAN FD capable CAN controllers support up to 64 bytes of
 payload. The representation of this length in can_frame.len and
 canfd_frame.len for userspace applications and inside the Linux network
-layer is a plain value from 0 .. 64 instead of the CAN 'data length code'.
-The data length code was a 1:1 mapping to the payload length in the Classical
-CAN frames anyway. The payload length to the bus-relevant DLC mapping is
-only performed inside the CAN drivers, preferably with the helper
+layer is a plain value from 0 .. 64 instead of the Classical CAN length
+which ranges from 0 to 8. The payload length to the bus-relevant DLC mapping
+is only performed inside the CAN drivers, preferably with the helper
 functions can_fd_dlc2len() and can_fd_len2dlc().
 
 The CAN netdevice driver capabilities can be distinguished by the network
@@ -1465,6 +1464,70 @@ Example when 'fd-non-iso on' is added on this switchable CAN FD adapter::
    can <FD,FD-NON-ISO> state ERROR-ACTIVE (berr-counter tx 0 rx 0) restart-ms 0
 
 
+Transmitter Delay Compensation
+~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+
+At high bit rates, the propagation delay from the TX pin to the RX pin of
+the transceiver might become greater than the actual bit time causing
+measurement errors: the RX pin would still be measuring the previous bit.
+
+The Transmitter Delay Compensation (thereafter, TDC) resolves this problem
+by introducing a Secondary Sample Point (SSP) equal to the distance, in
+minimum time quantum, from the start of the bit time on the TX pin to the
+actual measurement on the RX pin. The SSP is calculated as the sum of two
+configurable values: the TDC Value (TDCV) and the TDC offset (TDCO).
+
+TDC, if supported by the device, can be configured together with CAN-FD
+using the ip tool's "tdc-mode" argument as follow:
+
+**omitted**
+	When no "tdc-mode" option is provided, the kernel will automatically
+	decide whether TDC should be turned on, in which case it will
+	calculate a default TDCO and use the TDCV as measured by the
+	device. This is the recommended method to use TDC.
+
+**"tdc-mode off"**
+	TDC is explicitly disabled.
+
+**"tdc-mode auto"**
+	The user must provide the "tdco" argument. The TDCV will be
+	automatically calculated by the device. This option is only
+	available if the device supports the TDC-AUTO CAN controller mode.
+
+**"tdc-mode manual"**
+	The user must provide both the "tdco" and "tdcv" arguments. This
+	option is only available if the device supports the TDC-MANUAL CAN
+	controller mode.
+
+Note that some devices may offer an additional parameter: "tdcf" (TDC Filter
+window). If supported by your device, this can be added as an optional
+argument to either "tdc-mode auto" or "tdc-mode manual".
+
+Example configuring a 500 kbit/s arbitration bitrate, a 5 Mbit/s data
+bitrate, a TDCO of 15 minimum time quantum and a TDCV automatically measured
+by the device::
+
+    $ ip link set can0 up type can bitrate 500000 \
+                                   fd on dbitrate 4000000 \
+				   tdc-mode auto tdco 15
+    $ ip -details link show can0
+    5: can0: <NOARP,UP,LOWER_UP,ECHO> mtu 72 qdisc pfifo_fast state UP \
+             mode DEFAULT group default qlen 10
+        link/can  promiscuity 0 allmulti 0 minmtu 72 maxmtu 72
+        can <FD,TDC-AUTO> state ERROR-ACTIVE restart-ms 0
+          bitrate 500000 sample-point 0.875
+          tq 12 prop-seg 69 phase-seg1 70 phase-seg2 20 sjw 10 brp 1
+          ES582.1/ES584.1: tseg1 2..256 tseg2 2..128 sjw 1..128 brp 1..512 \
+          brp_inc 1
+          dbitrate 4000000 dsample-point 0.750
+          dtq 12 dprop-seg 7 dphase-seg1 7 dphase-seg2 5 dsjw 2 dbrp 1
+          tdco 15 tdcf 0
+          ES582.1/ES584.1: dtseg1 2..32 dtseg2 1..16 dsjw 1..8 dbrp 1..32 \
+          dbrp_inc 1
+          tdco 0..127 tdcf 0..127
+          clock 80000000
+
+
 Supported CAN Hardware
 ----------------------
 

Documentation/networking/can.rst

@@ -25,6 +25,9 @@ seg6_require_hmac - INTEGER
 
 	Default is 0.
 
+/proc/sys/net/ipv6/seg6_* variables:
+====================================
+
 seg6_flowlabel - INTEGER
 	Controls the behaviour of computing the flowlabel of outer
 	IPv6 header in case of SR T.encaps