Merge tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl

Pull pin control updates from Linus Walleij:
 "There is nothing exciting going on, no core changes, just a few
  drivers and cleanups.

  New drivers:

   - Cypress CY8C95x0 chip pin control support, along with an immediate
     cleanup

   - Mediatek MT8188 SoC pin control support

   - Qualcomm SM8450 and SC8280XP LPASS (low power audio subsystem) pin
     control support

   - Qualcomm PM7250, PM8450

   - Rockchip RV1126 SoC pin control support

  Improvements:

   - Fix some missing pins in the Armada 37xx driver

   - Convert Broadcom and Nomadik drivers to use PINCTRL_PINGROUP()
     macro

   - Fix some GPIO irq_chips to be immutable

   - Massive Qualcomm device tree binding cleanup, with more to come"

* tag 'pinctrl-v6.1-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (119 commits)
  MAINTAINERS: adjust STARFIVE JH7100 PINCTRL DRIVER after file movement
  pinctrl: starfive: Rename "pinctrl-starfive" to "pinctrl-starfive-jh7100"
  pinctrl: Create subdirectory for StarFive drivers
  dt-bindings: pinctrl: st,stm32: Document interrupt-controller property
  dt-bindings: pinctrl: st,stm32: Document gpio-hog pattern property
  dt-bindings: pinctrl: st,stm32: Document gpio-line-names
  pinctrl: st: stop abusing of_get_named_gpio()
  pinctrl: wpcm450: Correct the fwnode_irq_get() return value check
  pinctrl: bcm: Remove unused struct bcm6328_pingroup
  pinctrl: qcom: restrict drivers per ARM/ARM64
  pinctrl: bcm: ns: Remove redundant dev_err call
  gpio: rockchip: request GPIO mux to pinctrl when setting direction
  pinctrl: rockchip: add pinmux_ops.gpio_set_direction callback
  pinctrl: cy8c95x0: Align function names in cy8c95x0_pmxops
  pinctrl: cy8c95x0: Drop atomicity on operations on push_pull
  pinctrl: cy8c95x0: Lock register accesses in cy8c95x0_set_mux()
  pinctrl: sunxi: sun50i-h5: Switch to use dev_err_probe() helper
  pinctrl: stm32: Switch to use dev_err_probe() helper
  dt-bindings: qcom-pmic-gpio: Add PM7250B and PM8450 bindings
  pinctrl: qcom: spmi-gpio: Add compatible for PM7250B
  ...

Author: torvalds

Documentation/devicetree/bindings/pinctrl/aspeed,ast2400-pinctrl.yaml

@@ -63,6 +63,12 @@ examples:
     syscon: scu@1e6e2000 {
         compatible = "aspeed,ast2400-scu", "syscon", "simple-mfd";
         reg = <0x1e6e2000 0x1a8>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
         pinctrl: pinctrl {
             compatible = "aspeed,ast2400-pinctrl";

Documentation/devicetree/bindings/pinctrl/aspeed,ast2500-pinctrl.yaml

@@ -82,6 +82,10 @@ examples:
         #clock-cells = <1>;
         #reset-cells = <1>;
 
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
+
         pinctrl: pinctrl {
             compatible = "aspeed,ast2500-pinctrl";
             aspeed,external-nodes = <&gfx>, <&lhc>;

Documentation/devicetree/bindings/pinctrl/aspeed,ast2600-pinctrl.yaml

@@ -96,6 +96,12 @@ examples:
     syscon: scu@1e6e2000 {
         compatible = "aspeed,ast2600-scu", "syscon", "simple-mfd";
         reg = <0x1e6e2000 0xf6c>;
+        #clock-cells = <1>;
+        #reset-cells = <1>;
+
+        #address-cells = <1>;
+        #size-cells = <1>;
+        ranges = <0x0 0x1e6e2000 0x1000>;
 
         pinctrl: pinctrl {
             compatible = "aspeed,ast2600-pinctrl";

Documentation/devicetree/bindings/pinctrl/brcm,bcm4908-pinctrl.yaml

@@ -23,6 +23,7 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    additionalProperties: false
 
     properties:
       function:

Documentation/devicetree/bindings/pinctrl/cypress,cy8c95x0.yaml

@@ -0,0 +1,134 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/cypress,cy8c95x0.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Cypress CY8C95X0 I2C GPIO expander
+
+maintainers:
+  - Patrick Rudolph <[email protected]>
+
+description: |
+  This supports the 20/40/60 pin Cypress CYC95x0 GPIO I2C expanders.
+  Pin function configuration is performed on a per-pin basis.
+
+properties:
+  compatible:
+    enum:
+      - cypress,cy8c9520
+      - cypress,cy8c9540
+      - cypress,cy8c9560
+
+  reg:
+    maxItems: 1
+
+  gpio-controller: true
+
+  '#gpio-cells':
+    description:
+      The first cell is the GPIO number and the second cell specifies GPIO
+      flags, as defined in <dt-bindings/gpio/gpio.h>.
+    const: 2
+
+  interrupts:
+    maxItems: 1
+
+  interrupt-controller: true
+
+  '#interrupt-cells':
+    const: 2
+
+  gpio-line-names: true
+
+  gpio-ranges:
+    maxItems: 1
+
+  gpio-reserved-ranges:
+    maxItems: 1
+
+  vdd-supply:
+    description:
+      Optional power supply.
+
+patternProperties:
+  '-pins$':
+    type: object
+    description:
+      Pinctrl node's client devices use subnodes for desired pin configuration.
+      Client device subnodes use below standard properties.
+    $ref: pincfg-node.yaml#
+
+    properties:
+      pins:
+        description:
+          List of gpio pins affected by the properties specified in this
+          subnode.
+        items:
+          pattern: '^gp([0-7][0-7])$'
+        minItems: 1
+        maxItems: 60
+
+      function:
+        description:
+          Specify the alternative function to be configured for the specified
+          pins.
+        enum: [ gpio, pwm ]
+
+      bias-pull-down: true
+
+      bias-pull-up: true
+
+      bias-disable: true
+
+      output-high: true
+
+      output-low: true
+
+      drive-push-pull: true
+
+      drive-open-drain: true
+
+      drive-open-source: true
+
+    required:
+      - pins
+      - function
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+  - interrupt-controller
+  - '#interrupt-cells'
+  - gpio-controller
+  - '#gpio-cells'
+
+additionalProperties: false
+
+allOf:
+  - $ref: "pinctrl.yaml#"
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pinctrl@20 {
+        compatible = "cypress,cy8c9520";
+        reg = <0x20>;
+        gpio-controller;
+        #gpio-cells = <2>;
+        #interrupt-cells = <2>;
+        interrupts = <GIC_SPI 94 IRQ_TYPE_LEVEL_HIGH>;
+        interrupt-controller;
+        vdd-supply = <&p3v3>;
+        gpio-reserved-ranges = <5 1>;
+      };
+    };

Documentation/devicetree/bindings/pinctrl/intel,pinctrl-keembay.yaml

@@ -44,6 +44,7 @@ properties:
 patternProperties:
   '^gpio@[0-9a-f]*$':
     type: object
+    additionalProperties: false
 
     description:
       Child nodes can be specified to contain pin configuration information,

Documentation/devicetree/bindings/pinctrl/intel,pinctrl-thunderbay.yaml

@@ -42,6 +42,7 @@ properties:
 patternProperties:
   '^gpio@[0-9a-f]*$':
     type: object
+    additionalProperties: false
 
     description:
       Child nodes can be specified to contain pin configuration information,

Documentation/devicetree/bindings/pinctrl/marvell,ac5-pinctrl.yaml

@@ -24,6 +24,7 @@ patternProperties:
   '-pins$':
     type: object
     $ref: pinmux-node.yaml#
+    additionalProperties: false
 
     properties:
       marvell,function:

Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml

@@ -76,6 +76,8 @@ required:
 patternProperties:
   '-[0-9]*$':
     type: object
+    additionalProperties: false
+
     patternProperties:
       '-pins*$':
         type: object

Documentation/devicetree/bindings/pinctrl/mediatek,mt7986-pinctrl.yaml

@@ -117,6 +117,10 @@ patternProperties:
           "i2s"             "audio"     62, 63, 64, 65
           "switch_int"      "eth"       66
           "mdc_mdio"        "eth"       67
+          "wf_2g"           "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83
+          "wf_5g"           "wifi"      91, 92, 93, 94, 95, 96, 97, 98, 99, 100
+          "wf_dbdc"         "wifi"      74, 75, 76, 77, 78, 79, 80, 81, 82, 83,
+                                        84, 85
 
         $ref: "/schemas/pinctrl/pinmux-node.yaml"
         properties:
@@ -234,7 +238,9 @@ patternProperties:
             then:
               properties:
                 groups:
-                  enum: [wf_2g, wf_5g, wf_dbdc]
+                  items:
+                    enum: [wf_2g, wf_5g, wf_dbdc]
+                  maxItems: 3
       '.*conf.*':
         type: object
         additionalProperties: false
@@ -248,25 +254,27 @@ patternProperties:
               An array of strings. Each string contains the name of a pin.
               There is no PIN 41 to PIN 65 above on mt7686b, you can only use
               those pins on mt7986a.
-            enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
-                   GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
-                   GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
-                   GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
-                   SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
-                   SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
-                   UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
-                   UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
-                   UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
-                   EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
-                   EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
-                   PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
-                   WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
-                   WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
-                   WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
-                   WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
-                   WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
-                   WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
-                   WF1_HB8]
+            items:
+              enum: [SYS_WATCHDOG, WF2G_LED, WF5G_LED, I2C_SCL, I2C_SDA, GPIO_0,
+                     GPIO_1, GPIO_2, GPIO_3, GPIO_4, GPIO_5, GPIO_6, GPIO_7,
+                     GPIO_8, GPIO_9, GPIO_10, GPIO_11, GPIO_12, GPIO_13, GPIO_14,
+                     GPIO_15, PWM0, PWM1, SPI0_CLK, SPI0_MOSI, SPI0_MISO, SPI0_CS,
+                     SPI0_HOLD, SPI0_WP, SPI1_CLK, SPI1_MOSI, SPI1_MISO, SPI1_CS,
+                     SPI2_CLK, SPI2_MOSI, SPI2_MISO, SPI2_CS, SPI2_HOLD, SPI2_WP,
+                     UART0_RXD, UART0_TXD, PCIE_PERESET_N, UART1_RXD, UART1_TXD,
+                     UART1_CTS, UART1_RTS, UART2_RXD, UART2_TXD, UART2_CTS,
+                     UART2_RTS, EMMC_DATA_0, EMMC_DATA_1, EMMC_DATA_2,
+                     EMMC_DATA_3, EMMC_DATA_4, EMMC_DATA_5, EMMC_DATA_6,
+                     EMMC_DATA_7, EMMC_CMD, EMMC_CK, EMMC_DSL, EMMC_RSTB, PCM_DTX,
+                     PCM_DRX, PCM_CLK, PCM_FS, MT7531_INT, SMI_MDC, SMI_MDIO,
+                     WF0_DIG_RESETB, WF0_CBA_RESETB, WF0_XO_REQ, WF0_TOP_CLK,
+                     WF0_TOP_DATA, WF0_HB1, WF0_HB2, WF0_HB3, WF0_HB4, WF0_HB0,
+                     WF0_HB0_B, WF0_HB5, WF0_HB6, WF0_HB7, WF0_HB8, WF0_HB9,
+                     WF0_HB10, WF1_DIG_RESETB, WF1_CBA_RESETB, WF1_XO_REQ,
+                     WF1_TOP_CLK, WF1_TOP_DATA, WF1_HB1, WF1_HB2, WF1_HB3,
+                     WF1_HB4, WF1_HB0, WF1_HB0_B, WF1_HB5, WF1_HB6, WF1_HB7,
+                     WF1_HB8]
+            maxItems: 101
 
           bias-disable: true