Merge tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio into staging-linus

Jonathan writes:

First set of IIO fixes in the 5.6 cycle.

* adxl372
  - Fix marking of buffered values as big endian.
* ak8974
  - Fix wrong handling of negative values when read from sysfs.
* at91-sama5d2
  - Fix differential mode by ensuring configuration set correctly.
* ping
  - Use the write sensor type for of_ping_match table.
* sps30
  - Kconfig build dependency fix.
* st-sensors
  - Fix a wrong identification of which part the SMO8840 ACPI ID indicates.
* stm32-dsfdm
  - Fix a sleep in atomic issue by not using a trigger when it makes no sense.
* stm32-timer
  - Make sure master mode is disabled when stopping.
* vcnl400
  - Update some sampling periods based on new docs.

* tag 'iio-fixes-for-5.6a' of git://git.kernel.org/pub/scm/linux/kernel/git/jic23/iio:
  iio: ping: set pa_laser_ping_cfg in of_ping_match
  iio: chemical: sps30: fix missing triggered buffer dependency
  iio: st_sensors: remap SMO8840 to LIS2DH12
  iio: light: vcnl4000: update sampling periods for vcnl4040
  iio: light: vcnl4000: update sampling periods for vcnl4200
  iio: accel: adxl372: Set iio_chan BE
  iio: magnetometer: ak8974: Fix negative raw values in sysfs
  iio: trigger: stm32-timer: disable master mode when stopping
  iio: adc: stm32-dfsdm: fix sleep in atomic context
  iio: adc: at91-sama5d2_adc: fix differential channels in triggered mode

Author: gregkh

drivers/iio/accel/adxl372.c

@@ -237,6 +237,7 @@ static const struct adxl372_axis_lookup adxl372_axis_lookup_table[] = {
 		.realbits = 12,						\
 		.storagebits = 16,					\
 		.shift = 4,						\
+		.endianness = IIO_BE,					\
 	},								\
 }
 

drivers/iio/accel/st_accel_i2c.c

@@ -110,7 +110,7 @@ MODULE_DEVICE_TABLE(of, st_accel_of_match);
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id st_accel_acpi_match[] = {
-	{"SMO8840", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
+	{"SMO8840", (kernel_ulong_t)LIS2DH12_ACCEL_DEV_NAME},
 	{"SMO8A90", (kernel_ulong_t)LNG2DM_ACCEL_DEV_NAME},
 	{ },
 };

drivers/iio/adc/at91-sama5d2_adc.c

@@ -723,6 +723,7 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 
 	for_each_set_bit(bit, indio->active_scan_mask, indio->num_channels) {
 		struct iio_chan_spec const *chan = at91_adc_chan_get(indio, bit);
+		u32 cor;
 
 		if (!chan)
 			continue;
@@ -731,6 +732,20 @@ static int at91_adc_configure_trigger(struct iio_trigger *trig, bool state)
 		    chan->type == IIO_PRESSURE)
 			continue;
 
+		if (state) {
+			cor = at91_adc_readl(st, AT91_SAMA5D2_COR);
+
+			if (chan->differential)
+				cor |= (BIT(chan->channel) |
+					BIT(chan->channel2)) <<
+					AT91_SAMA5D2_COR_DIFF_OFFSET;
+			else
+				cor &= ~(BIT(chan->channel) <<
+				       AT91_SAMA5D2_COR_DIFF_OFFSET);
+
+			at91_adc_writel(st, AT91_SAMA5D2_COR, cor);
+		}
+
 		if (state) {
 			at91_adc_writel(st, AT91_SAMA5D2_CHER,
 					BIT(chan->channel));

drivers/iio/adc/stm32-dfsdm-adc.c

@@ -842,43 +842,13 @@ static inline void stm32_dfsdm_process_data(struct stm32_dfsdm_adc *adc,
 	}
 }
 
-static irqreturn_t stm32_dfsdm_adc_trigger_handler(int irq, void *p)
-{
-	struct iio_poll_func *pf = p;
-	struct iio_dev *indio_dev = pf->indio_dev;
-	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
-	int available = stm32_dfsdm_adc_dma_residue(adc);
-
-	while (available >= indio_dev->scan_bytes) {
-		s32 *buffer = (s32 *)&adc->rx_buf[adc->bufi];
-
-		stm32_dfsdm_process_data(adc, buffer);
-
-		iio_push_to_buffers_with_timestamp(indio_dev, buffer,
-						   pf->timestamp);
-		available -= indio_dev->scan_bytes;
-		adc->bufi += indio_dev->scan_bytes;
-		if (adc->bufi >= adc->buf_sz)
-			adc->bufi = 0;
-	}
-
-	iio_trigger_notify_done(indio_dev->trig);
-
-	return IRQ_HANDLED;
-}
-
 static void stm32_dfsdm_dma_buffer_done(void *data)
 {
 	struct iio_dev *indio_dev = data;
 	struct stm32_dfsdm_adc *adc = iio_priv(indio_dev);
 	int available = stm32_dfsdm_adc_dma_residue(adc);
 	size_t old_pos;
 
-	if (indio_dev->currentmode & INDIO_BUFFER_TRIGGERED) {
-		iio_trigger_poll_chained(indio_dev->trig);
-		return;
-	}
-
 	/*
 	 * FIXME: In Kernel interface does not support cyclic DMA buffer,and
 	 * offers only an interface to push data samples per samples.
@@ -906,7 +876,15 @@ static void stm32_dfsdm_dma_buffer_done(void *data)
 			adc->bufi = 0;
 			old_pos = 0;
 		}
-		/* regular iio buffer without trigger */
+		/*
+		 * In DMA mode the trigger services of IIO are not used
+		 * (e.g. no call to iio_trigger_poll).
+		 * Calling irq handler associated to the hardware trigger is not
+		 * relevant as the conversions have already been done. Data
+		 * transfers are performed directly in DMA callback instead.
+		 * This implementation avoids to call trigger irq handler that
+		 * may sleep, in an atomic context (DMA irq handler context).
+		 */
 		if (adc->dev_data->type == DFSDM_IIO)
 			iio_push_to_buffers(indio_dev, buffer);
 	}
@@ -1536,8 +1514,7 @@ static int stm32_dfsdm_adc_init(struct iio_dev *indio_dev)
 	}
 
 	ret = iio_triggered_buffer_setup(indio_dev,
-					 &iio_pollfunc_store_time,
-					 &stm32_dfsdm_adc_trigger_handler,
+					 &iio_pollfunc_store_time, NULL,
 					 &stm32_dfsdm_buffer_setup_ops);
 	if (ret) {
 		stm32_dfsdm_dma_release(indio_dev);

drivers/iio/chemical/Kconfig

@@ -91,6 +91,8 @@ config SPS30
 	tristate "SPS30 particulate matter sensor"
 	depends on I2C
 	select CRC8
+	select IIO_BUFFER
+	select IIO_TRIGGERED_BUFFER
 	help
 	  Say Y here to build support for the Sensirion SPS30 particulate
 	  matter sensor.

drivers/iio/light/vcnl4000.c

@@ -167,16 +167,17 @@ static int vcnl4200_init(struct vcnl4000_data *data)
 	data->vcnl4200_ps.reg = VCNL4200_PS_DATA;
 	switch (id) {
 	case VCNL4200_PROD_ID:
-		/* Integration time is 50ms, but the experiments */
-		/* show 54ms in total. */
-		data->vcnl4200_al.sampling_rate = ktime_set(0, 54000 * 1000);
-		data->vcnl4200_ps.sampling_rate = ktime_set(0, 4200 * 1000);
+		/* Default wait time is 50ms, add 20% tolerance. */
+		data->vcnl4200_al.sampling_rate = ktime_set(0, 60000 * 1000);
+		/* Default wait time is 4.8ms, add 20% tolerance. */
+		data->vcnl4200_ps.sampling_rate = ktime_set(0, 5760 * 1000);
 		data->al_scale = 24000;
 		break;
 	case VCNL4040_PROD_ID:
-		/* Integration time is 80ms, add 10ms. */
-		data->vcnl4200_al.sampling_rate = ktime_set(0, 100000 * 1000);
-		data->vcnl4200_ps.sampling_rate = ktime_set(0, 100000 * 1000);
+		/* Default wait time is 80ms, add 20% tolerance. */
+		data->vcnl4200_al.sampling_rate = ktime_set(0, 96000 * 1000);
+		/* Default wait time is 5ms, add 20% tolerance. */
+		data->vcnl4200_ps.sampling_rate = ktime_set(0, 6000 * 1000);
 		data->al_scale = 120000;
 		break;
 	}

drivers/iio/magnetometer/ak8974.c

@@ -564,7 +564,7 @@ static int ak8974_read_raw(struct iio_dev *indio_dev,
 		 * We read all axes and discard all but one, for optimized
 		 * reading, use the triggered buffer.
 		 */
-		*val = le16_to_cpu(hw_values[chan->address]);
+		*val = (s16)le16_to_cpu(hw_values[chan->address]);
 
 		ret = IIO_VAL_INT;
 	}

drivers/iio/proximity/ping.c

@@ -269,7 +269,7 @@ static const struct iio_chan_spec ping_chan_spec[] = {
 
 static const struct of_device_id of_ping_match[] = {
 	{ .compatible = "parallax,ping", .data = &pa_ping_cfg},
-	{ .compatible = "parallax,laserping", .data = &pa_ping_cfg},
+	{ .compatible = "parallax,laserping", .data = &pa_laser_ping_cfg},
 	{},
 };
 

drivers/iio/trigger/stm32-timer-trigger.c

@@ -161,7 +161,8 @@ static int stm32_timer_start(struct stm32_timer_trigger *priv,
 	return 0;
 }
 
-static void stm32_timer_stop(struct stm32_timer_trigger *priv)
+static void stm32_timer_stop(struct stm32_timer_trigger *priv,
+			     struct iio_trigger *trig)
 {
 	u32 ccer, cr1;
 
@@ -179,6 +180,12 @@ static void stm32_timer_stop(struct stm32_timer_trigger *priv)
 	regmap_write(priv->regmap, TIM_PSC, 0);
 	regmap_write(priv->regmap, TIM_ARR, 0);
 
+	/* Force disable master mode */
+	if (stm32_timer_is_trgo2_name(trig->name))
+		regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS2, 0);
+	else
+		regmap_update_bits(priv->regmap, TIM_CR2, TIM_CR2_MMS, 0);
+
 	/* Make sure that registers are updated */
 	regmap_update_bits(priv->regmap, TIM_EGR, TIM_EGR_UG, TIM_EGR_UG);
 }
@@ -197,7 +204,7 @@ static ssize_t stm32_tt_store_frequency(struct device *dev,
 		return ret;
 
 	if (freq == 0) {
-		stm32_timer_stop(priv);
+		stm32_timer_stop(priv, trig);
 	} else {
 		ret = stm32_timer_start(priv, trig, freq);
 		if (ret)