Merge tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux

Pull arm64 updates from Catalin Marinas:
 "The bulk is in-kernel pointer authentication, activity monitors and
  lots of asm symbol annotations. I also queued the sys_mremap() patch
  commenting the asymmetry in the address untagging.

  Summary:

   - In-kernel Pointer Authentication support (previously only offered
     to user space).

   - ARM Activity Monitors (AMU) extension support allowing better CPU
     utilisation numbers for the scheduler (frequency invariance).

   - Memory hot-remove support for arm64.

   - Lots of asm annotations (SYM_*) in preparation for the in-kernel
     Branch Target Identification (BTI) support.

   - arm64 perf updates: ARMv8.5-PMU 64-bit counters, refactoring the
     PMU init callbacks, support for new DT compatibles.

   - IPv6 header checksum optimisation.

   - Fixes: SDEI (software delegated exception interface) double-lock on
     hibernate with shared events.

   - Minor clean-ups and refactoring: cpu_ops accessor,
     cpu_do_switch_mm() converted to C, cpufeature finalisation helper.

   - sys_mremap() comment explaining the asymmetric address untagging
     behaviour"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (81 commits)
  mm/mremap: Add comment explaining the untagging behaviour of mremap()
  arm64: head: Convert install_el2_stub to SYM_INNER_LABEL
  arm64: Introduce get_cpu_ops() helper function
  arm64: Rename cpu_read_ops() to init_cpu_ops()
  arm64: Declare ACPI parking protocol CPU operation if needed
  arm64: move kimage_vaddr to .rodata
  arm64: use mov_q instead of literal ldr
  arm64: Kconfig: verify binutils support for ARM64_PTR_AUTH
  lkdtm: arm64: test kernel pointer authentication
  arm64: compile the kernel with ptrauth return address signing
  kconfig: Add support for 'as-option'
  arm64: suspend: restore the kernel ptrauth keys
  arm64: __show_regs: strip PAC from lr in printk
  arm64: unwind: strip PAC from kernel addresses
  arm64: mask PAC bits of __builtin_return_address
  arm64: initialize ptrauth keys for kernel booting task
  arm64: initialize and switch ptrauth kernel keys
  arm64: enable ptrauth earlier
  arm64: cpufeature: handle conflicts based on capability
  arm64: cpufeature: Move cpu capability helpers inside C file
  ...

Author: torvalds

Documentation/arm64/amu.rst

@@ -0,0 +1,112 @@
+=======================================================
+Activity Monitors Unit (AMU) extension in AArch64 Linux
+=======================================================
+
+Author: Ionela Voinescu <[email protected]>
+
+Date: 2019-09-10
+
+This document briefly describes the provision of Activity Monitors Unit
+support in AArch64 Linux.
+
+
+Architecture overview
+---------------------
+
+The activity monitors extension is an optional extension introduced by the
+ARMv8.4 CPU architecture.
+
+The activity monitors unit, implemented in each CPU, provides performance
+counters intended for system management use. The AMU extension provides a
+system register interface to the counter registers and also supports an
+optional external memory-mapped interface.
+
+Version 1 of the Activity Monitors architecture implements a counter group
+of four fixed and architecturally defined 64-bit event counters.
+  - CPU cycle counter: increments at the frequency of the CPU.
+  - Constant counter: increments at the fixed frequency of the system
+    clock.
+  - Instructions retired: increments with every architecturally executed
+    instruction.
+  - Memory stall cycles: counts instruction dispatch stall cycles caused by
+    misses in the last level cache within the clock domain.
+
+When in WFI or WFE these counters do not increment.
+
+The Activity Monitors architecture provides space for up to 16 architected
+event counters. Future versions of the architecture may use this space to
+implement additional architected event counters.
+
+Additionally, version 1 implements a counter group of up to 16 auxiliary
+64-bit event counters.
+
+On cold reset all counters reset to 0.
+
+
+Basic support
+-------------
+
+The kernel can safely run a mix of CPUs with and without support for the
+activity monitors extension. Therefore, when CONFIG_ARM64_AMU_EXTN is
+selected we unconditionally enable the capability to allow any late CPU
+(secondary or hotplugged) to detect and use the feature.
+
+When the feature is detected on a CPU, we flag the availability of the
+feature but this does not guarantee the correct functionality of the
+counters, only the presence of the extension.
+
+Firmware (code running at higher exception levels, e.g. arm-tf) support is
+needed to:
+ - Enable access for lower exception levels (EL2 and EL1) to the AMU
+   registers.
+ - Enable the counters. If not enabled these will read as 0.
+ - Save/restore the counters before/after the CPU is being put/brought up
+   from the 'off' power state.
+
+When using kernels that have this feature enabled but boot with broken
+firmware the user may experience panics or lockups when accessing the
+counter registers. Even if these symptoms are not observed, the values
+returned by the register reads might not correctly reflect reality. Most
+commonly, the counters will read as 0, indicating that they are not
+enabled.
+
+If proper support is not provided in firmware it's best to disable
+CONFIG_ARM64_AMU_EXTN. To be noted that for security reasons, this does not
+bypass the setting of AMUSERENR_EL0 to trap accesses from EL0 (userspace) to
+EL1 (kernel). Therefore, firmware should still ensure accesses to AMU registers
+are not trapped in EL2/EL3.
+
+The fixed counters of AMUv1 are accessible though the following system
+register definitions:
+ - SYS_AMEVCNTR0_CORE_EL0
+ - SYS_AMEVCNTR0_CONST_EL0
+ - SYS_AMEVCNTR0_INST_RET_EL0
+ - SYS_AMEVCNTR0_MEM_STALL_EL0
+
+Auxiliary platform specific counters can be accessed using
+SYS_AMEVCNTR1_EL0(n), where n is a value between 0 and 15.
+
+Details can be found in: arch/arm64/include/asm/sysreg.h.
+
+
+Userspace access
+----------------
+
+Currently, access from userspace to the AMU registers is disabled due to:
+ - Security reasons: they might expose information about code executed in
+   secure mode.
+ - Purpose: AMU counters are intended for system management use.
+
+Also, the presence of the feature is not visible to userspace.
+
+
+Virtualization
+--------------
+
+Currently, access from userspace (EL0) and kernelspace (EL1) on the KVM
+guest side is disabled due to:
+ - Security reasons: they might expose information about code executed
+   by other guests or the host.
+
+Any attempt to access the AMU registers will result in an UNDEFINED
+exception being injected into the guest.

Documentation/arm64/booting.rst

@@ -248,6 +248,20 @@ Before jumping into the kernel, the following conditions must be met:
     - HCR_EL2.APK (bit 40) must be initialised to 0b1
     - HCR_EL2.API (bit 41) must be initialised to 0b1
 
+  For CPUs with Activity Monitors Unit v1 (AMUv1) extension present:
+  - If EL3 is present:
+    CPTR_EL3.TAM (bit 30) must be initialised to 0b0
+    CPTR_EL2.TAM (bit 30) must be initialised to 0b0
+    AMCNTENSET0_EL0 must be initialised to 0b1111
+    AMCNTENSET1_EL0 must be initialised to a platform specific value
+    having 0b1 set for the corresponding bit for each of the auxiliary
+    counters present.
+  - If the kernel is entered at EL1:
+    AMCNTENSET0_EL0 must be initialised to 0b1111
+    AMCNTENSET1_EL0 must be initialised to a platform specific value
+    having 0b1 set for the corresponding bit for each of the auxiliary
+    counters present.
+
 The requirements described above for CPU mode, caches, MMUs, architected
 timers, coherency and system registers apply to all CPUs.  All CPUs must
 enter the kernel in the same exception level.

Documentation/arm64/index.rst

@@ -6,6 +6,7 @@ ARM64 Architecture
     :maxdepth: 1
 
     acpi_object_usage
+    amu
     arm-acpi
     booting
     cpu-feature-registers

arch/arm64/Kconfig

@@ -117,6 +117,7 @@ config ARM64
 	select HAVE_ALIGNED_STRUCT_PAGE if SLUB
 	select HAVE_ARCH_AUDITSYSCALL
 	select HAVE_ARCH_BITREVERSE
+	select HAVE_ARCH_COMPILER_H
 	select HAVE_ARCH_HUGE_VMAP
 	select HAVE_ARCH_JUMP_LABEL
 	select HAVE_ARCH_JUMP_LABEL_RELATIVE
@@ -280,6 +281,9 @@ config ZONE_DMA32
 config ARCH_ENABLE_MEMORY_HOTPLUG
 	def_bool y
 
+config ARCH_ENABLE_MEMORY_HOTREMOVE
+	def_bool y
+
 config SMP
 	def_bool y
 
@@ -951,11 +955,11 @@ config HOTPLUG_CPU
 
 # Common NUMA Features
 config NUMA
-	bool "Numa Memory Allocation and Scheduler Support"
+	bool "NUMA Memory Allocation and Scheduler Support"
 	select ACPI_NUMA if ACPI
 	select OF_NUMA
 	help
-	  Enable NUMA (Non Uniform Memory Access) support.
+	  Enable NUMA (Non-Uniform Memory Access) support.
 
 	  The kernel will try to allocate memory used by a CPU on the
 	  local memory of the CPU and add some more
@@ -1497,23 +1501,82 @@ config ARM64_PTR_AUTH
 	bool "Enable support for pointer authentication"
 	default y
 	depends on !KVM || ARM64_VHE
+	depends on (CC_HAS_SIGN_RETURN_ADDRESS || CC_HAS_BRANCH_PROT_PAC_RET) && AS_HAS_PAC
+	depends on CC_IS_GCC || (CC_IS_CLANG && AS_HAS_CFI_NEGATE_RA_STATE)
+	depends on (!FUNCTION_GRAPH_TRACER || DYNAMIC_FTRACE_WITH_REGS)
 	help
 	  Pointer authentication (part of the ARMv8.3 Extensions) provides
 	  instructions for signing and authenticating pointers against secret
 	  keys, which can be used to mitigate Return Oriented Programming (ROP)
 	  and other attacks.
 
 	  This option enables these instructions at EL0 (i.e. for userspace).
-
 	  Choosing this option will cause the kernel to initialise secret keys
 	  for each process at exec() time, with these keys being
 	  context-switched along with the process.
 
+	  If the compiler supports the -mbranch-protection or
+	  -msign-return-address flag (e.g. GCC 7 or later), then this option
+	  will also cause the kernel itself to be compiled with return address
+	  protection. In this case, and if the target hardware is known to
+	  support pointer authentication, then CONFIG_STACKPROTECTOR can be
+	  disabled with minimal loss of protection.
+
 	  The feature is detected at runtime. If the feature is not present in
 	  hardware it will not be advertised to userspace/KVM guest nor will it
 	  be enabled. However, KVM guest also require VHE mode and hence
 	  CONFIG_ARM64_VHE=y option to use this feature.
 
+	  If the feature is present on the boot CPU but not on a late CPU, then
+	  the late CPU will be parked. Also, if the boot CPU does not have
+	  address auth and the late CPU has then the late CPU will still boot
+	  but with the feature disabled. On such a system, this option should
+	  not be selected.
+
+	  This feature works with FUNCTION_GRAPH_TRACER option only if
+	  DYNAMIC_FTRACE_WITH_REGS is enabled.
+
+config CC_HAS_BRANCH_PROT_PAC_RET
+	# GCC 9 or later, clang 8 or later
+	def_bool $(cc-option,-mbranch-protection=pac-ret+leaf)
+
+config CC_HAS_SIGN_RETURN_ADDRESS
+	# GCC 7, 8
+	def_bool $(cc-option,-msign-return-address=all)
+
+config AS_HAS_PAC
+	def_bool $(as-option,-Wa$(comma)-march=armv8.3-a)
+
+config AS_HAS_CFI_NEGATE_RA_STATE
+	def_bool $(as-instr,.cfi_startproc\n.cfi_negate_ra_state\n.cfi_endproc\n)
+
+endmenu
+
+menu "ARMv8.4 architectural features"
+
+config ARM64_AMU_EXTN
+	bool "Enable support for the Activity Monitors Unit CPU extension"
+	default y
+	help
+	  The activity monitors extension is an optional extension introduced
+	  by the ARMv8.4 CPU architecture. This enables support for version 1
+	  of the activity monitors architecture, AMUv1.
+
+	  To enable the use of this extension on CPUs that implement it, say Y.
+
+	  Note that for architectural reasons, firmware _must_ implement AMU
+	  support when running on CPUs that present the activity monitors
+	  extension. The required support is present in:
+	    * Version 1.5 and later of the ARM Trusted Firmware
+
+	  For kernels that have this configuration enabled but boot with broken
+	  firmware, you may need to say N here until the firmware is fixed.
+	  Otherwise you may experience firmware panics or lockups when
+	  accessing the counter registers. Even if you are not observing these
+	  symptoms, the values returned by the register reads might not
+	  correctly reflect reality. Most commonly, the value read will be 0,
+	  indicating that the counter is not enabled.
+
 endmenu
 
 menu "ARMv8.5 architectural features"

arch/arm64/Makefile

@@ -65,6 +65,17 @@ stack_protector_prepare: prepare0
 					include/generated/asm-offsets.h))
 endif
 
+ifeq ($(CONFIG_ARM64_PTR_AUTH),y)
+branch-prot-flags-$(CONFIG_CC_HAS_SIGN_RETURN_ADDRESS) := -msign-return-address=all
+branch-prot-flags-$(CONFIG_CC_HAS_BRANCH_PROT_PAC_RET) := -mbranch-protection=pac-ret+leaf
+# -march=armv8.3-a enables the non-nops instructions for PAC, to avoid the
+# compiler to generate them and consequently to break the single image contract
+# we pass it only to the assembler. This option is utilized only in case of non
+# integrated assemblers.
+branch-prot-flags-$(CONFIG_AS_HAS_PAC) += -Wa,-march=armv8.3-a
+KBUILD_CFLAGS += $(branch-prot-flags-y)
+endif
+
 ifeq ($(CONFIG_CPU_BIG_ENDIAN), y)
 KBUILD_CPPFLAGS	+= -mbig-endian
 CHECKFLAGS	+= -D__AARCH64EB__

arch/arm64/crypto/aes-ce.S

@@ -9,8 +9,8 @@
 #include <linux/linkage.h>
 #include <asm/assembler.h>
 
-#define AES_ENTRY(func)		SYM_FUNC_START(ce_ ## func)
-#define AES_ENDPROC(func)	SYM_FUNC_END(ce_ ## func)
+#define AES_FUNC_START(func)		SYM_FUNC_START(ce_ ## func)
+#define AES_FUNC_END(func)		SYM_FUNC_END(ce_ ## func)
 
 	.arch		armv8-a+crypto