Merge tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
 "Here are some small USB fixes for 5.6-rc7. And there's a thunderbolt
  driver fix thrown in for good measure as well.

  These fixes are:
   - new device ids for usb-serial drivers
   - thunderbolt error code fix
   - xhci driver fixes
   - typec fixes
   - cdc-acm driver fixes
   - chipidea driver fix
   - more USB quirks added for devices that need them.

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  USB: cdc-acm: fix rounding error in TIOCSSERIAL
  USB: cdc-acm: fix close_delay and closing_wait units in TIOCSSERIAL
  usb: quirks: add NO_LPM quirk for RTL8153 based ethernet adapters
  usb: chipidea: udc: fix sleeping function called from invalid context
  USB: serial: pl2303: add device-id for HP LD381
  USB: serial: option: add ME910G1 ECM composition 0x110b
  usb: host: xhci-plat: add a shutdown
  usb: typec: ucsi: displayport: Fix a potential race during registration
  usb: typec: ucsi: displayport: Fix NULL pointer dereference
  USB: Disable LPM on WD19's Realtek Hub
  usb: xhci: apply XHCI_SUSPEND_DELAY to AMD XHCI controller 1022:145c
  xhci: Do not open code __print_symbolic() in xhci trace events
  thunderbolt: Fix error code in tb_port_is_width_supported()

Author: torvalds

drivers/thunderbolt/switch.c

@@ -954,7 +954,7 @@ static bool tb_port_is_width_supported(struct tb_port *port, int width)
 	ret = tb_port_read(port, &phy, TB_CFG_PORT,
 			   port->cap_phy + LANE_ADP_CS_0, 1);
 	if (ret)
-		return ret;
+		return false;
 
 	widths = (phy & LANE_ADP_CS_0_SUPPORTED_WIDTH_MASK) >>
 		LANE_ADP_CS_0_SUPPORTED_WIDTH_SHIFT;

drivers/usb/chipidea/udc.c

@@ -1530,18 +1530,19 @@ static const struct usb_ep_ops usb_ep_ops = {
 static void ci_hdrc_gadget_connect(struct usb_gadget *_gadget, int is_active)
 {
 	struct ci_hdrc *ci = container_of(_gadget, struct ci_hdrc, gadget);
-	unsigned long flags;
 
 	if (is_active) {
 		pm_runtime_get_sync(&_gadget->dev);
 		hw_device_reset(ci);
-		spin_lock_irqsave(&ci->lock, flags);
+		spin_lock_irq(&ci->lock);
 		if (ci->driver) {
 			hw_device_state(ci, ci->ep0out->qh.dma);
 			usb_gadget_set_state(_gadget, USB_STATE_POWERED);
+			spin_unlock_irq(&ci->lock);
 			usb_udc_vbus_handler(_gadget, true);
+		} else {
+			spin_unlock_irq(&ci->lock);
 		}
-		spin_unlock_irqrestore(&ci->lock, flags);
 	} else {
 		usb_udc_vbus_handler(_gadget, false);
 		if (ci->driver)

drivers/usb/class/cdc-acm.c

@@ -896,35 +896,43 @@ static int get_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 
 	ss->xmit_fifo_size = acm->writesize;
 	ss->baud_base = le32_to_cpu(acm->line.dwDTERate);
-	ss->close_delay	= acm->port.close_delay / 10;
+	ss->close_delay	= jiffies_to_msecs(acm->port.close_delay) / 10;
 	ss->closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
 				ASYNC_CLOSING_WAIT_NONE :
-				acm->port.closing_wait / 10;
+				jiffies_to_msecs(acm->port.closing_wait) / 10;
 	return 0;
 }
 
 static int set_serial_info(struct tty_struct *tty, struct serial_struct *ss)
 {
 	struct acm *acm = tty->driver_data;
 	unsigned int closing_wait, close_delay;
+	unsigned int old_closing_wait, old_close_delay;
 	int retval = 0;
 
-	close_delay = ss->close_delay * 10;
+	close_delay = msecs_to_jiffies(ss->close_delay * 10);
 	closing_wait = ss->closing_wait == ASYNC_CLOSING_WAIT_NONE ?
-			ASYNC_CLOSING_WAIT_NONE : ss->closing_wait * 10;
+			ASYNC_CLOSING_WAIT_NONE :
+			msecs_to_jiffies(ss->closing_wait * 10);
+
+	/* we must redo the rounding here, so that the values match */
+	old_close_delay	= jiffies_to_msecs(acm->port.close_delay) / 10;
+	old_closing_wait = acm->port.closing_wait == ASYNC_CLOSING_WAIT_NONE ?
+				ASYNC_CLOSING_WAIT_NONE :
+				jiffies_to_msecs(acm->port.closing_wait) / 10;
 
 	mutex_lock(&acm->port.mutex);
 
-	if (!capable(CAP_SYS_ADMIN)) {
-		if ((close_delay != acm->port.close_delay) ||
-		    (closing_wait != acm->port.closing_wait))
+	if ((ss->close_delay != old_close_delay) ||
+            (ss->closing_wait != old_closing_wait)) {
+		if (!capable(CAP_SYS_ADMIN))
 			retval = -EPERM;
-		else
-			retval = -EOPNOTSUPP;
-	} else {
-		acm->port.close_delay  = close_delay;
-		acm->port.closing_wait = closing_wait;
-	}
+		else {
+			acm->port.close_delay  = close_delay;
+			acm->port.closing_wait = closing_wait;
+		}
+	} else
+		retval = -EOPNOTSUPP;
 
 	mutex_unlock(&acm->port.mutex);
 	return retval;

drivers/usb/core/quirks.c

@@ -378,6 +378,12 @@ static const struct usb_device_id usb_quirk_list[] = {
 	{ USB_DEVICE(0x0b05, 0x17e0), .driver_info =
 			USB_QUIRK_IGNORE_REMOTE_WAKEUP },
 
+	/* Realtek hub in Dell WD19 (Type-C) */
+	{ USB_DEVICE(0x0bda, 0x0487), .driver_info = USB_QUIRK_NO_LPM },
+
+	/* Generic RTL8153 based ethernet adapters */
+	{ USB_DEVICE(0x0bda, 0x8153), .driver_info = USB_QUIRK_NO_LPM },
+
 	/* Action Semiconductor flash disk */
 	{ USB_DEVICE(0x10d6, 0x2200), .driver_info =
 			USB_QUIRK_STRING_FETCH_255 },

drivers/usb/host/xhci-pci.c

@@ -136,7 +136,8 @@ static void xhci_pci_quirks(struct device *dev, struct xhci_hcd *xhci)
 		xhci->quirks |= XHCI_AMD_PLL_FIX;
 
 	if (pdev->vendor == PCI_VENDOR_ID_AMD &&
-		(pdev->device == 0x15e0 ||
+		(pdev->device == 0x145c ||
+		 pdev->device == 0x15e0 ||
 		 pdev->device == 0x15e1 ||
 		 pdev->device == 0x43bb))
 		xhci->quirks |= XHCI_SUSPEND_DELAY;

drivers/usb/host/xhci-plat.c

@@ -445,6 +445,7 @@ MODULE_DEVICE_TABLE(acpi, usb_xhci_acpi_match);
 static struct platform_driver usb_xhci_driver = {
 	.probe	= xhci_plat_probe,
 	.remove	= xhci_plat_remove,
+	.shutdown = usb_hcd_platform_shutdown,
 	.driver	= {
 		.name = "xhci-hcd",
 		.pm = &xhci_plat_pm_ops,

drivers/usb/host/xhci-trace.h

@@ -289,23 +289,12 @@ DECLARE_EVENT_CLASS(xhci_log_urb,
 	),
 	TP_printk("ep%d%s-%s: urb %p pipe %u slot %d length %d/%d sgs %d/%d stream %d flags %08x",
 			__entry->epnum, __entry->dir_in ? "in" : "out",
-			({ char *s;
-			switch (__entry->type) {
-			case USB_ENDPOINT_XFER_INT:
-				s = "intr";
-				break;
-			case USB_ENDPOINT_XFER_CONTROL:
-				s = "control";
-				break;
-			case USB_ENDPOINT_XFER_BULK:
-				s = "bulk";
-				break;
-			case USB_ENDPOINT_XFER_ISOC:
-				s = "isoc";
-				break;
-			default:
-				s = "UNKNOWN";
-			} s; }), __entry->urb, __entry->pipe, __entry->slot_id,
+			__print_symbolic(__entry->type,
+				   { USB_ENDPOINT_XFER_INT,	"intr" },
+				   { USB_ENDPOINT_XFER_CONTROL,	"control" },
+				   { USB_ENDPOINT_XFER_BULK,	"bulk" },
+				   { USB_ENDPOINT_XFER_ISOC,	"isoc" }),
+			__entry->urb, __entry->pipe, __entry->slot_id,
 			__entry->actual, __entry->length, __entry->num_mapped_sgs,
 			__entry->num_sgs, __entry->stream, __entry->flags
 		)

drivers/usb/serial/option.c

@@ -1183,6 +1183,8 @@ static const struct usb_device_id option_ids[] = {
 	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110a, 0xff),	/* Telit ME910G1 */
 	  .driver_info = NCTRL(0) | RSVD(3) },
+	{ USB_DEVICE_INTERFACE_CLASS(TELIT_VENDOR_ID, 0x110b, 0xff),	/* Telit ME910G1 (ECM) */
+	  .driver_info = NCTRL(0) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910),
 	  .driver_info = NCTRL(0) | RSVD(1) | RSVD(2) },
 	{ USB_DEVICE(TELIT_VENDOR_ID, TELIT_PRODUCT_LE910_USBCFG4),

drivers/usb/serial/pl2303.c

@@ -99,6 +99,7 @@ static const struct usb_device_id id_table[] = {
 	{ USB_DEVICE(SUPERIAL_VENDOR_ID, SUPERIAL_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD220TA_PRODUCT_ID) },
+	{ USB_DEVICE(HP_VENDOR_ID, HP_LD381_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LD960TA_PRODUCT_ID) },
 	{ USB_DEVICE(HP_VENDOR_ID, HP_LCM220_PRODUCT_ID) },

drivers/usb/serial/pl2303.h

@@ -130,6 +130,7 @@
 #define HP_LM920_PRODUCT_ID	0x026b
 #define HP_TD620_PRODUCT_ID	0x0956
 #define HP_LD960_PRODUCT_ID	0x0b39
+#define HP_LD381_PRODUCT_ID	0x0f7f
 #define HP_LCM220_PRODUCT_ID	0x3139
 #define HP_LCM960_PRODUCT_ID	0x3239
 #define HP_LD220_PRODUCT_ID	0x3524