khusika
diff --git a/‎Documentation/ABI/testing/sysfs-bus-pci
Lines changed: 11 additions & 0 deletions b/‎Documentation/ABI/testing/sysfs-bus-pci
Lines changed: 11 additions & 0 deletions
diff --git a/‎Documentation/ABI/testing/sysfs-fs-f2fs
Lines changed: 5 additions & 2 deletions b/‎Documentation/ABI/testing/sysfs-fs-f2fs
Lines changed: 5 additions & 2 deletions
diff --git a/‎Documentation/RCU/stallwarn.rst
Lines changed: 1 addition & 1 deletion b/‎Documentation/RCU/stallwarn.rst
Lines changed: 1 addition & 1 deletion
diff --git a/‎Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
Lines changed: 18 additions & 4 deletions b/‎Documentation/devicetree/bindings/clock/adi,axi-clkgen.yaml
Lines changed: 18 additions & 4 deletions
diff --git a/‎Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
Lines changed: 1 addition & 1 deletion b/‎Documentation/devicetree/bindings/iio/dac/adi,ad3552r.yaml
Lines changed: 1 addition & 1 deletion
diff --git a/‎Documentation/devicetree/bindings/serial/rs485.yaml
Lines changed: 9 additions & 10 deletions b/‎Documentation/devicetree/bindings/serial/rs485.yaml
Lines changed: 9 additions & 10 deletions
diff --git a/‎Documentation/devicetree/bindings/sound/mt6359.yaml
Lines changed: 5 additions & 5 deletions b/‎Documentation/devicetree/bindings/sound/mt6359.yaml
Lines changed: 5 additions & 5 deletions
diff --git a/‎Documentation/devicetree/bindings/vendor-prefixes.yaml
Lines changed: 2 additions & 0 deletions b/‎Documentation/devicetree/bindings/vendor-prefixes.yaml
Lines changed: 2 additions & 0 deletions
diff --git a/‎Documentation/driver-api/fpga/fpga-bridge.rst
Lines changed: 5 additions & 2 deletions b/‎Documentation/driver-api/fpga/fpga-bridge.rst
Lines changed: 5 additions & 2 deletions
diff --git a/‎Documentation/driver-api/fpga/fpga-mgr.rst
Lines changed: 20 additions & 14 deletions b/‎Documentation/driver-api/fpga/fpga-mgr.rst
Lines changed: 20 additions & 14 deletions
@@ -163,6 +163,17 @@ Description:
 		will be present in sysfs.  Writing 1 to this file
 		will perform reset.
 
+What:		/sys/bus/pci/devices/.../reset_subordinate
+Date:		October 2024
+Contact:	[email protected]
+Description:
+		This is visible only for bridge devices. If you want to reset
+		all devices attached through the subordinate bus of a specific
+		bridge device, writing 1 to this will try to do it.  This will
+		affect all devices attached to the system through this bridge
+		similiar to writing 1 to their individual "reset" file, so use
+		with caution.
+
 What:		/sys/bus/pci/devices/.../vpd
 Date:		February 2008
 Contact:	Ben Hutchings <[email protected]>
 
@@ -303,10 +303,13 @@ Description:	Do background GC aggressively when set. Set to 0 by default.
 		GC approach and turns SSR mode on.
 		gc urgent low(2): lowers the bar of checking I/O idling in
 		order to process outstanding discard commands and GC a
-		little bit aggressively. uses cost benefit GC approach.
+		little bit aggressively. always uses cost benefit GC approach,
+		and will override age-threshold GC approach if ATGC is enabled
+		at the same time.
 		gc urgent mid(3): does GC forcibly in a period of given
 		gc_urgent_sleep_time and executes a mid level of I/O idling check.
-		uses cost benefit GC approach.
+		always uses cost benefit GC approach, and will override
+		age-threshold GC approach if ATGC is enabled at the same time.
 
 What:		/sys/fs/f2fs/<disk>/gc_urgent_sleep_time
 Date:		August 2017
 
@@ -243,7 +243,7 @@ ticks this GP)" indicates that this CPU has not taken any scheduling-clock
 interrupts during the current stalled grace period.
 
 The "idle=" portion of the message prints the dyntick-idle state.
-The hex number before the first "/" is the low-order 12 bits of the
+The hex number before the first "/" is the low-order 16 bits of the
 dynticks counter, which will have an even-numbered value if the CPU
 is in dyntick-idle mode and an odd-numbered value otherwise.  The hex
 number between the two "/"s is the value of the nesting, which will be
 
@@ -26,9 +26,21 @@ properties:
     description:
       Specifies the reference clock(s) from which the output frequency is
       derived. This must either reference one clock if only the first clock
-      input is connected or two if both clock inputs are connected.
-    minItems: 1
-    maxItems: 2
+      input is connected or two if both clock inputs are connected. The last
+      clock is the AXI bus clock that needs to be enabled so we can access the
+      core registers.
+    minItems: 2
+    maxItems: 3
+
+  clock-names:
+    oneOf:
+      - items:
+          - const: clkin1
+          - const: s_axi_aclk
+      - items:
+          - const: clkin1
+          - const: clkin2
+          - const: s_axi_aclk
 
   '#clock-cells':
     const: 0
@@ -40,6 +52,7 @@ required:
   - compatible
   - reg
   - clocks
+  - clock-names
   - '#clock-cells'
 
 additionalProperties: false
@@ -50,5 +63,6 @@ examples:
       compatible = "adi,axi-clkgen-2.00.a";
       #clock-cells = <0>;
       reg = <0xff000000 0x1000>;
-      clocks = <&osc 1>;
+      clocks = <&osc 1>, <&clkc 15>;
+      clock-names = "clkin1", "s_axi_aclk";
     };
@@ -26,7 +26,7 @@ properties:
     maxItems: 1
 
   spi-max-frequency:
-    maximum: 30000000
+    maximum: 66000000
 
   reset-gpios:
     maxItems: 1
 
@@ -18,16 +18,15 @@ properties:
     description: prop-encoded-array <a b>
     $ref: /schemas/types.yaml#/definitions/uint32-array
     items:
-      items:
-        - description: Delay between rts signal and beginning of data sent in
-            milliseconds. It corresponds to the delay before sending data.
-          default: 0
-          maximum: 100
-        - description: Delay between end of data sent and rts signal in milliseconds.
-            It corresponds to the delay after sending data and actual release
-            of the line.
-          default: 0
-          maximum: 100
+      - description: Delay between rts signal and beginning of data sent in
+          milliseconds. It corresponds to the delay before sending data.
+        default: 0
+        maximum: 100
+      - description: Delay between end of data sent and rts signal in milliseconds.
+          It corresponds to the delay after sending data and actual release
+          of the line.
+        default: 0
+        maximum: 100
 
   rs485-rts-active-low:
     description: drive RTS low when sending (default is high).
 
@@ -23,8 +23,8 @@ properties:
       Indicates how many data pins are used to transmit two channels of PDM
       signal. 0 means two wires, 1 means one wire. Default value is 0.
     enum:
-      - 0 # one wire
-      - 1 # two wires
+      - 0 # two wires
+      - 1 # one wire
 
   mediatek,mic-type-0:
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -53,9 +53,9 @@ additionalProperties: false
 
 examples:
   - |
-    mt6359codec: mt6359codec {
-      mediatek,dmic-mode = <0>;
-      mediatek,mic-type-0 = <2>;
+    mt6359codec: audio-codec {
+        mediatek,dmic-mode = <0>;
+        mediatek,mic-type-0 = <2>;
     };
 
 ...
@@ -869,6 +869,8 @@ patternProperties:
     description: National Semiconductor
   "^nec,.*":
     description: NEC LCD Technologies, Ltd.
+  "^neofidelity,.*":
+    description: Neofidelity Inc.
   "^neonode,.*":
     description: Neonode Inc.
   "^netgear,.*":
 
@@ -6,17 +6,20 @@ API to implement a new FPGA bridge
 
 * struct fpga_bridge - The FPGA Bridge structure
 * struct fpga_bridge_ops - Low level Bridge driver ops
-* fpga_bridge_register() - Create and register a bridge
+* __fpga_bridge_register() - Create and register a bridge
 * fpga_bridge_unregister() - Unregister a bridge
 
+The helper macro ``fpga_bridge_register()`` automatically sets
+the module that registers the FPGA bridge as the owner.
+
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge
 
 .. kernel-doc:: include/linux/fpga/fpga-bridge.h
    :functions: fpga_bridge_ops
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
-   :functions: fpga_bridge_register
+   :functions: __fpga_bridge_register
 
 .. kernel-doc:: drivers/fpga/fpga-bridge.c
    :functions: fpga_bridge_unregister
@@ -24,7 +24,8 @@ How to support a new FPGA device
 --------------------------------
 
 To add another FPGA manager, write a driver that implements a set of ops.  The
-probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
+probe function calls ``fpga_mgr_register()`` or ``fpga_mgr_register_full()``,
+such as::
 
 	static const struct fpga_manager_ops socfpga_fpga_ops = {
 		.write_init = socfpga_fpga_ops_configure_init,
@@ -69,10 +70,11 @@ probe function calls fpga_mgr_register() or fpga_mgr_register_full(), such as::
 	}
 
 Alternatively, the probe function could call one of the resource managed
-register functions, devm_fpga_mgr_register() or devm_fpga_mgr_register_full().
-When these functions are used, the parameter syntax is the same, but the call
-to fpga_mgr_unregister() should be removed. In the above example, the
-socfpga_fpga_remove() function would not be required.
+register functions, ``devm_fpga_mgr_register()`` or
+``devm_fpga_mgr_register_full()``.  When these functions are used, the
+parameter syntax is the same, but the call to ``fpga_mgr_unregister()`` should be
+removed. In the above example, the ``socfpga_fpga_remove()`` function would not be
+required.
 
 The ops will implement whatever device specific register writes are needed to
 do the programming sequence for this particular FPGA.  These ops return 0 for
@@ -125,15 +127,19 @@ API for implementing a new FPGA Manager driver
 * struct fpga_manager -  the FPGA manager struct
 * struct fpga_manager_ops -  Low level FPGA manager driver ops
 * struct fpga_manager_info -  Parameter structure for fpga_mgr_register_full()
-* fpga_mgr_register_full() -  Create and register an FPGA manager using the
+* __fpga_mgr_register_full() -  Create and register an FPGA manager using the
   fpga_mgr_info structure to provide the full flexibility of options
-* fpga_mgr_register() -  Create and register an FPGA manager using standard
+* __fpga_mgr_register() -  Create and register an FPGA manager using standard
   arguments
-* devm_fpga_mgr_register_full() -  Resource managed version of
-  fpga_mgr_register_full()
-* devm_fpga_mgr_register() -  Resource managed version of fpga_mgr_register()
+* __devm_fpga_mgr_register_full() -  Resource managed version of
+  __fpga_mgr_register_full()
+* __devm_fpga_mgr_register() -  Resource managed version of __fpga_mgr_register()
 * fpga_mgr_unregister() -  Unregister an FPGA manager
 
+Helper macros ``fpga_mgr_register_full()``, ``fpga_mgr_register()``,
+``devm_fpga_mgr_register_full()``, and ``devm_fpga_mgr_register()`` are available
+to ease the registration.
+
 .. kernel-doc:: include/linux/fpga/fpga-mgr.h
    :functions: fpga_mgr_states
 
@@ -147,16 +153,16 @@ API for implementing a new FPGA Manager driver
    :functions: fpga_manager_info
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register_full
+   :functions: __fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: fpga_mgr_register
+   :functions: __fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register_full
+   :functions: __devm_fpga_mgr_register_full
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
-   :functions: devm_fpga_mgr_register
+   :functions: __devm_fpga_mgr_register
 
 .. kernel-doc:: drivers/fpga/fpga-mgr.c
    :functions: fpga_mgr_unregister