Getting Device configuration errors that show up on in HA as a critical then goes away a little bit later

[JosephRDawson]

NOTE: I masked the UUID and removed the device key... But that info looked fine.

So my description as best as I can give it is...
This error will show up every so often then after about 20-30 sec the error clears without me doing anything. It is always the same device so far when I have caught it.

I will unplug the plug and put it back in later tonight to see if that clears the issue.

Any ideas what this error means?

The control of the device in HA is fine.

I am running latest version of HA and latest version of your add on.

Any thoughts?

[JosephRDawson]

from logs

This error originated from a custom integration.

Logger: custom_components.meross_lan.mss110r_###############################6
Source: custom_components/meross_lan/helpers/init.py:174
integration: Meross LAN (documentation, issues)
First occurred: 8:08:08 PM (11 occurrences)
Last logged: 10:53:17 PM

Received a response from a mismatching device (received uuid:2101153420373651853848e1e9471a2e, configured uuid:2101154729626551853848e1e9471a24)

[JosephRDawson]

After a power cycle on the plug i am still getting the issue. Any thoughts on what it means?

[krahabb]

This a problem with dynamic ip assignments on your network:
see #524 #546 #570
original issues #341 #460

[JosephRDawson]

I read the articles... But I didn't see any fix listed. Is their a way to address this issue. I could assign the devcie a fixed IP.

I have a mesh network but why only ONE device is doing this all of a sudden is unusual.

Is their any work arounds yet for this issue?

Joe

[JosephRDawson]

According to the error the problem is the Received a response from a mismatching device (received uuid:2101153420373651853848e1e9471a2e, configured uuid:2101154729626551853848e1e9471a24)

[JosephRDawson]

I just found out that even at the moments it is reporting the error the control of the device though home assistant is fine. So at no point is the device NOT working. Makes me wonder if this is just some sort of false error.

[JosephRDawson]

NEW information... When the error is happening I said the device was functioning normal and that is true. But I just noticed at the same time the error was happening another merros switch was going off-line and coming back on-line when the error cleared.

So I just power cycled that switch. But that didn't fix that issues sadly. I JUST watched it do it again. DARN.

[JosephRDawson]

After I repluged it in again it wouldn't connect at all to the network.

I rebooted it again and moved it to another location and it was fine.
I then put a Kaza switch back in its old location because I don't have time to figure it out right now.