HID: amd_sfh: Fix SRA sensor when it's the only sensor

On systems that only have an SRA sensor connected to SFH the sensor
doesn't get enabled due to a bad optimization condition of breaking
the sensor walk loop.

This optimization is unnecessary in the first place because if there
is only one device then the loop only runs once. Drop the condition
and explicitly mark sensor as enabled.

Reported-by: Yijun Shen <[email protected]>
Tested-By: Yijun Shen <[email protected]>
Fixes: d1c444b ("HID: amd_sfh: Add support to export device operating states")
Cc: [email protected]
Signed-off-by: Mario Limonciello <[email protected]>
Acked-by: Basavaraj Natikar <[email protected]>
Signed-off-by: Jiri Kosina <[email protected]>

Author: superm1

drivers/hid/amd-sfh-hid/sfh1_1/amd_sfh_init.c

@@ -134,9 +134,6 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 	for (i = 0; i < cl_data->num_hid_devices; i++) {
 		cl_data->sensor_sts[i] = SENSOR_DISABLED;
 
-		if (cl_data->num_hid_devices == 1 && cl_data->sensor_idx[0] == SRA_IDX)
-			break;
-
 		if (cl_data->sensor_idx[i] == SRA_IDX) {
 			info.sensor_idx = cl_data->sensor_idx[i];
 			writel(0, privdata->mmio + amd_get_p2c_val(privdata, 0));
@@ -145,8 +142,10 @@ static int amd_sfh1_1_hid_client_init(struct amd_mp2_dev *privdata)
 				(privdata, cl_data->sensor_idx[i], ENABLE_SENSOR);
 
 			cl_data->sensor_sts[i] = (status == 0) ? SENSOR_ENABLED : SENSOR_DISABLED;
-			if (cl_data->sensor_sts[i] == SENSOR_ENABLED)
+			if (cl_data->sensor_sts[i] == SENSOR_ENABLED) {
+				cl_data->is_any_sensor_enabled = true;
 				privdata->dev_en.is_sra_present = true;
+			}
 			continue;
 		}