Merge tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging

Pull hwmon updates from Guenter Roeck:
 "New drivers:
   - KEBA fan controller
   - KEBA battery monitoring controller
   - MAX77705

  Support added to existing drivers:
   - MAXIMUS VI HERO and ROG MAXIMUS Z90 Formula support (asus-ec-sensors)
   - SQ52206 support (ina238)
   - lt3074 support (pmbus/lt3074)
   - ADPM12160 support (pmbus/max34440)
   - MPM82504 and for MPM3695 family support (pmbus/mpq8785)
   - Add the Dell OptiPlex 7050 to the DMI whitelist (dell-smm)
   - Zen5 Ryzen Desktop support (k10temp)

  Various other minor fixes and improvements"

* tag 'hwmon-for-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (48 commits)
  doc: hwmon: acpi_power_meter: Add information about enabling the power capping feature.
  hwmon: (isl28022) Fix current reading calculation
  hwmon: (lm75) Fix I3C transfer buffer pointer for incoming data
  hwmon: Add KEBA fan controller support
  hwmon: pmbus: mpq8785: Add support for MPM3695 family
  hwmon: pmbus: mpq8785: Add support for MPM82504
  hwmon: pmbus: mpq8785: Implement VOUT feedback resistor divider ratio configuration
  hwmon: pmbus: mpq8785: Prepare driver for multiple device support
  dt-bindings: hwmon: Add bindings for mpq8785 driver
  hwmon: (ina238) Modify the calculation formula to adapt to different chips
  hwmon: (ina238) Add support for SQ52206
  dt-bindings: Add SQ52206 to ina2xx devicetree bindings
  hwmon: (ina238) Add ina238_config to save configurations for different chips
  hwmon: (ausus-ec-sensors) add MAXIMUS VI HERO.
  hwmon: (isl28022, nct7363) Convert to use maple tree register cache
  hwmon: (asus-ec-sensors) check sensor index in read_string()
  hwmon: (asus-ec-sensors) add ROG MAXIMUS Z90 Formula.
  dt-bindings: hwmon: Add Sophgo SG2044 external hardware monitor support
  hwmon: (max77705) Add initial support
  hwmon: (tmp102) add vcc regulator support
  ...

Author: torvalds

Documentation/devicetree/bindings/hwmon/pmbus/adi,lt3074.yaml

@@ -0,0 +1,50 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/adi,lt3074.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Analog Devices LT3074 voltage regulator
+
+maintainers:
+  - Cedric Encarnacion <[email protected]>
+
+description: |
+  The LT3074 is a low voltage, ultra-low noise and ultra-fast transient
+  response linear regulator. It allows telemetry for input/output voltage,
+  output current and temperature through the PMBus serial interface.
+
+  Datasheet:
+    https://www.analog.com/en/products/lt3074.html
+
+allOf:
+  - $ref: /schemas/regulator/regulator.yaml#
+
+properties:
+  compatible:
+    enum:
+      - adi,lt3074
+
+  reg:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        regulator@6d {
+            compatible = "adi,lt3074";
+            reg = <0x6d>;
+            regulator-name = "vout";
+            regulator-max-microvolt = <1250000>;
+            regulator-min-microvolt = <1150000>;
+        };
+    };

Documentation/devicetree/bindings/hwmon/pmbus/mps,mpq8785.yaml

@@ -0,0 +1,74 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/hwmon/pmbus/mps,mpq8785.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Monolithic Power Systems Multiphase Voltage Regulators with PMBus
+
+maintainers:
+  - Charles Hsu <[email protected]>
+
+description:
+  Monolithic Power Systems digital multiphase voltage regulators with PMBus.
+
+properties:
+  compatible:
+    enum:
+      - mps,mpm3695
+      - mps,mpm3695-25
+      - mps,mpm82504
+      - mps,mpq8785
+
+  reg:
+    maxItems: 1
+
+  mps,vout-fb-divider-ratio-permille:
+    description:
+      The feedback resistor divider ratio, expressed in permille
+      (Vfb / Vout * 1000). This value is written to the PMBUS_VOUT_SCALE_LOOP
+      register and is required for correct output voltage presentation.
+    $ref: /schemas/types.yaml#/definitions/uint32
+    minimum: 1
+    maximum: 4095
+    default: 706
+
+required:
+  - compatible
+  - reg
+
+allOf:
+  - if:
+      properties:
+        compatible:
+          enum:
+            - mps,mpm3695
+            - mps,mpm82504
+    then:
+      properties:
+        mps,vout-fb-divider-ratio-permille:
+          maximum: 1023
+
+  - if:
+      properties:
+        compatible:
+          const: mps,mpq8785
+    then:
+      properties:
+        mps,vout-fb-divider-ratio-permille:
+          maximum: 2047
+
+additionalProperties: false
+
+examples:
+  - |
+    i2c {
+      #address-cells = <1>;
+      #size-cells = <0>;
+
+      pmic@30 {
+        compatible = "mps,mpm82504";
+        reg = <0x30>;
+        mps,vout-fb-divider-ratio-permille = <600>;
+      };
+    };

Documentation/devicetree/bindings/hwmon/sophgo,sg2042-hwmon-mcu.yaml

@@ -11,7 +11,11 @@ maintainers:
 
 properties:
   compatible:
-    const: sophgo,sg2042-hwmon-mcu
+    oneOf:
+      - items:
+          - const: sophgo,sg2044-hwmon-mcu
+          - const: sophgo,sg2042-hwmon-mcu
+      - const: sophgo,sg2042-hwmon-mcu
 
   reg:
     maxItems: 1

Documentation/devicetree/bindings/hwmon/ti,amc6821.yaml

@@ -28,6 +28,17 @@ properties:
   i2c-mux:
     type: object
 
+  fan:
+    $ref: fan-common.yaml#
+    unevaluatedProperties: false
+
+  "#pwm-cells":
+    const: 2
+    description: |
+      Number of cells in a PWM specifier.
+      - cell 0: PWM period in nanoseconds
+      - cell 1: PWM polarity: 0 or PWM_POLARITY_INVERTED
+
 required:
   - compatible
   - reg
@@ -50,9 +61,14 @@ examples:
         #address-cells = <1>;
         #size-cells = <0>;
 
-        fan@18 {
+        fan_controller: fan@18 {
             compatible = "ti,amc6821";
             reg = <0x18>;
+            #pwm-cells = <2>;
+
+            fan {
+                pwms = <&fan_controller 40000 0>;
+            };
         };
     };
 

Documentation/devicetree/bindings/hwmon/ti,ina2xx.yaml

@@ -19,6 +19,7 @@ description: |
 properties:
   compatible:
     enum:
+      - silergy,sq52206
       - silergy,sy24655
       - ti,ina209
       - ti,ina219
@@ -58,6 +59,9 @@ properties:
       shunt voltage, and a value of 4 maps to ADCRANGE=0 such that a wider
       voltage range is used.
 
+      For SQ52206,the shunt-gain value 1 mapps to ADCRANGE=10/11, the value 2
+      mapps to ADCRANGE=01, and the value 4 mapps to ADCRANGE=00.
+
       The default value is device dependent, and is defined by the reset value
       of PGA/ADCRANGE in the respective configuration registers.
     $ref: /schemas/types.yaml#/definitions/uint32
@@ -97,6 +101,7 @@ allOf:
         compatible:
           contains:
             enum:
+              - silergy,sq52206
               - silergy,sy24655
               - ti,ina209
               - ti,ina219

Documentation/devicetree/bindings/hwmon/ti,tmp102.yaml

@@ -23,6 +23,9 @@ properties:
   "#thermal-sensor-cells":
     const: 1
 
+  vcc-supply:
+    description: Power supply for tmp102
+
 required:
   - compatible
   - reg
@@ -42,6 +45,7 @@ examples:
             reg = <0x48>;
             interrupt-parent = <&gpio7>;
             interrupts = <16 IRQ_TYPE_LEVEL_LOW>;
+            vcc-supply = <&supply>;
             #thermal-sensor-cells = <1>;
         };
     };

Documentation/devicetree/bindings/trivial-devices.yaml

@@ -295,8 +295,6 @@ properties:
           - mps,mp5990
             # Monolithic Power Systems Inc. digital step-down converter mp9941
           - mps,mp9941
-            # Monolithic Power Systems Inc. synchronous step-down converter mpq8785
-          - mps,mpq8785
             # Temperature sensor with integrated fan control
           - national,lm63
             # Serial Interface ACPI-Compatible Microprocessor System Hardware Monitor

Documentation/hwmon/acpi_power_meter.rst

@@ -37,9 +37,16 @@ arbitrary strings that ACPI provides with the meter.  The measures/ directory
 contains symlinks to the devices that this meter measures.
 
 Some computers have the ability to enforce a power cap in hardware.  If this is
-the case, the `power[1-*]_cap` and related sysfs files will appear.  When the
-average power consumption exceeds the cap, an ACPI event will be broadcast on
-the netlink event socket and a poll notification will be sent to the
+the case, the `power[1-*]_cap` and related sysfs files will appear.
+For information on enabling the power cap feature, refer to the description
+of the "force_on_cap" option in the "Module Parameters" chapter.
+To use the power cap feature properly, you need to set appropriate value
+(in microWatts) to the `power[1-*]_cap` sysfs files.
+The value must be within the range between the minimum value at `power[1-]_cap_min`
+and the maximum value at `power[1-]_cap_max (both in microWatts)`.
+
+When the average power consumption exceeds the cap, an ACPI event will be
+broadcast on the netlink event socket and a poll notification will be sent to the
 appropriate `power[1-*]_alarm` file to indicate that capping has begun, and the
 hardware has taken action to reduce power consumption.  Most likely this will
 result in reduced performance.
@@ -52,3 +59,19 @@ follows:
 `power[1-*]_cap` will be notified if the firmware changes the power cap.
 `power[1-*]_interval` will be notified if the firmware changes the averaging
 interval.
+
+Module Parameters
+-----------------
+
+* force_cap_on: bool
+                        Forcefully enable the power capping feature to specify
+                        the upper limit of the system's power consumption.
+
+                        By default, the driver's power capping feature is only
+                        enabled on IBM products.
+                        Therefore, on other systems that support power capping,
+                        you will need to use the option to enable it.
+
+                        Note: power capping is potentially unsafe feature.
+                        Please check the platform specifications to make sure
+                        that capping is supported before using this option.

Documentation/hwmon/asus_ec_sensors.rst

@@ -4,6 +4,7 @@ Kernel driver asus_ec_sensors
 =================================
 
 Supported boards:
+ * MAXIMUS VI HERO
  * PRIME X470-PRO
  * PRIME X570-PRO
  * PRIME X670E-PRO WIFI
@@ -20,6 +21,7 @@ Supported boards:
  * ROG CROSSHAIR X670E GENE
  * ROG MAXIMUS XI HERO
  * ROG MAXIMUS XI HERO (WI-FI)
+ * ROG MAXIMUS Z690 FORMULA
  * ROG STRIX B550-E GAMING
  * ROG STRIX B550-I GAMING
  * ROG STRIX X570-E GAMING

Documentation/hwmon/ina238.rst

@@ -14,6 +14,12 @@ Supported chips:
     Datasheet:
 	https://www.ti.com/lit/gpn/ina238
 
+  * Silergy SQ52206
+
+    Prefix: 'SQ52206'
+
+    Addresses: I2C 0x40 - 0x4f
+
 Author: Nathan Rossi <[email protected]>
 
 Description
@@ -54,3 +60,12 @@ temp1_input		Die temperature measurement (mC)
 temp1_max		Maximum die temperature threshold (mC)
 temp1_max_alarm		Maximum die temperature alarm
 ======================= =======================================================
+
+Additional sysfs entries for sq52206
+------------------------------------
+
+======================= =======================================================
+energy1_input		Energy measurement (mJ)
+
+power1_input_highest	Peak Power (uW)
+======================= =======================================================