Merge branch 'pm-cpufreq'

Merge cpufreq updates for 6.14:

 - Use str_enable_disable()-like helpers in cpufreq (Krzysztof
   Kozlowski).

 - Extend the Apple cpufreq driver to support more SoCs (Hector Martin,
   Nick Chan).

 - Add new cpufreq driver for Airoha SoCs (Christian Marangi).

 - Fix using cpufreq-dt as module (Andreas Kemnade).

 - Minor fixes for Sparc, SCMI, and Qcom cpufreq drivers (Ethan Carter
   Edwards, Sibi Sankar, Manivannan Sadhasivam).

 - Fix the maximum supported frequency computation in the ACPI cpufreq
   driver to avoid relying on unfounded assumptions (Gautham Shenoy).

 - Fix an amd-pstate driver regression with preferred core rankings not
   being used (Mario Limonciello).

 - Fix a precision issue with frequency calculation in the amd-pstate
   driver (Naresh Solanki).

 - Add ftrace event to the amd-pstate driver for active mode (Mario
   Limonciello).

 - Set default EPP policy on Ryzen processors in amd-pstate (Mario
   Limonciello).

 - Clean up the amd-pstate cpufreq driver and optimize it to increase
   code reuse (Mario Limonciello, Dhananjay Ugwekar).

 - Use CPPC to get scaling factors between HWP performance levels and
   frequency in the intel_pstate driver and make it stop using a built
   -in scaling factor for the Arrow Lake processor (Rafael Wysocki).

 - Make intel_pstate initialize epp_policy to CPUFREQ_POLICY_UNKNOWN for
   consistency with CPU offline (Christian Loehle).

 - Fix superfluous updates caused by need_freq_update in the schedutil
   cpufreq governor (Sultan Alsawaf).

* pm-cpufreq: (40 commits)
  cpufreq: Use str_enable_disable()-like helpers
  cpufreq: airoha: Add EN7581 CPUFreq SMCCC driver
  cpufreq: ACPI: Fix max-frequency computation
  cpufreq/amd-pstate: Refactor max frequency calculation
  cpufreq/amd-pstate: Fix prefcore rankings
  cpufreq: sparc: change kzalloc to kcalloc
  cpufreq: qcom: Implement clk_ops::determine_rate() for qcom_cpufreq* clocks
  cpufreq: qcom: Fix qcom_cpufreq_hw_recalc_rate() to query LUT if LMh IRQ is not available
  cpufreq: apple-soc: Add Apple A7-A8X SoC cpufreq support
  cpufreq: apple-soc: Set fallback transition latency to APPLE_DVFS_TRANSITION_TIMEOUT
  cpufreq: apple-soc: Increase cluster switch timeout to 400us
  cpufreq: apple-soc: Use 32-bit read for status register
  cpufreq: apple-soc: Allow per-SoC configuration of APPLE_DVFS_CMD_PS1
  cpufreq: apple-soc: Drop setting the PS2 field on M2+
  dt-bindings: cpufreq: apple,cluster-cpufreq: Add A7-A11, T2 compatibles
  dt-bindings: cpufreq: Document support for Airoha EN7581 CPUFreq
  cpufreq: fix using cpufreq-dt as module
  cpufreq: scmi: Register for limit change notifications
  cpufreq: schedutil: Fix superfluous updates caused by need_freq_update
  cpufreq: intel_pstate: Use CPUFREQ_POLICY_UNKNOWN
  ...

Author: rafaeljw

Documentation/devicetree/bindings/cpufreq/airoha,en7581-cpufreq.yaml

@@ -0,0 +1,55 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/cpufreq/airoha,en7581-cpufreq.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Airoha EN7581 CPUFreq
+
+maintainers:
+  - Christian Marangi <[email protected]>
+
+description: |
+  On newer Airoha SoC, CPU Frequency is scaled indirectly with SMC commands
+  to ATF.
+
+  A virtual clock is exposed. This virtual clock is a get-only clock and
+  is used to expose the current global CPU clock. The frequency info comes
+  by the output of the SMC command that reports the clock in MHz.
+
+  The SMC sets the CPU clock by providing an index, this is modelled as
+  performance states in a power domain.
+
+  CPUs can't be individually scaled as the CPU frequency is shared across
+  all CPUs and is global.
+
+properties:
+  compatible:
+    const: airoha,en7581-cpufreq
+
+  '#clock-cells':
+    const: 0
+
+  '#power-domain-cells':
+    const: 0
+
+  operating-points-v2: true
+
+required:
+  - compatible
+  - '#clock-cells'
+  - '#power-domain-cells'
+  - operating-points-v2
+
+additionalProperties: false
+
+examples:
+  - |
+    performance-domain {
+        compatible = "airoha,en7581-cpufreq";
+
+        operating-points-v2 = <&cpu_smcc_opp_table>;
+
+        #power-domain-cells = <0>;
+        #clock-cells = <0>;
+    };

Documentation/devicetree/bindings/cpufreq/apple,cluster-cpufreq.yaml

@@ -24,9 +24,17 @@ properties:
               - apple,t8112-cluster-cpufreq
           - const: apple,cluster-cpufreq
       - items:
-          - const: apple,t6000-cluster-cpufreq
+          - enum:
+              - apple,s8000-cluster-cpufreq
+              - apple,t8010-cluster-cpufreq
+              - apple,t8015-cluster-cpufreq
+              - apple,t6000-cluster-cpufreq
           - const: apple,t8103-cluster-cpufreq
           - const: apple,cluster-cpufreq
+      - items:
+          - const: apple,t7000-cluster-cpufreq
+          - const: apple,s5l8960x-cluster-cpufreq
+      - const: apple,s5l8960x-cluster-cpufreq
 
   reg:
     maxItems: 1

drivers/cpufreq/Kconfig

@@ -232,7 +232,7 @@ config CPUFREQ_VIRT
 	  If in doubt, say N.
 
 config CPUFREQ_DT_PLATDEV
-	tristate "Generic DT based cpufreq platdev driver"
+	bool "Generic DT based cpufreq platdev driver"
 	depends on OF
 	help
 	  This adds a generic DT based cpufreq platdev driver for frequency

drivers/cpufreq/Kconfig.arm

@@ -15,6 +15,14 @@ config ARM_ALLWINNER_SUN50I_CPUFREQ_NVMEM
 	  To compile this driver as a module, choose M here: the
 	  module will be called sun50i-cpufreq-nvmem.
 
+config ARM_AIROHA_SOC_CPUFREQ
+	tristate "Airoha EN7581 SoC CPUFreq support"
+	depends on ARCH_AIROHA || COMPILE_TEST
+	select PM_OPP
+	default ARCH_AIROHA
+	help
+	  This adds the CPUFreq driver for Airoha EN7581 SoCs.
+
 config ARM_APPLE_SOC_CPUFREQ
 	tristate "Apple Silicon SoC CPUFreq support"
 	depends on ARCH_APPLE || (COMPILE_TEST && 64BIT)

drivers/cpufreq/Makefile

@@ -53,6 +53,7 @@ obj-$(CONFIG_X86_AMD_FREQ_SENSITIVITY)	+= amd_freq_sensitivity.o
 
 ##################################################################################
 # ARM SoC drivers
+obj-$(CONFIG_ARM_AIROHA_SOC_CPUFREQ)	+= airoha-cpufreq.o
 obj-$(CONFIG_ARM_APPLE_SOC_CPUFREQ)	+= apple-soc-cpufreq.o
 obj-$(CONFIG_ARM_ARMADA_37XX_CPUFREQ)	+= armada-37xx-cpufreq.o
 obj-$(CONFIG_ARM_ARMADA_8K_CPUFREQ)	+= armada-8k-cpufreq.o

drivers/cpufreq/acpi-cpufreq.c

@@ -623,7 +623,14 @@ static int acpi_cpufreq_blacklist(struct cpuinfo_x86 *c)
 #endif
 
 #ifdef CONFIG_ACPI_CPPC_LIB
-static u64 get_max_boost_ratio(unsigned int cpu)
+/*
+ * get_max_boost_ratio: Computes the max_boost_ratio as the ratio
+ * between the highest_perf and the nominal_perf.
+ *
+ * Returns the max_boost_ratio for @cpu. Returns the CPPC nominal
+ * frequency via @nominal_freq if it is non-NULL pointer.
+ */
+static u64 get_max_boost_ratio(unsigned int cpu, u64 *nominal_freq)
 {
 	struct cppc_perf_caps perf_caps;
 	u64 highest_perf, nominal_perf;
@@ -652,6 +659,9 @@ static u64 get_max_boost_ratio(unsigned int cpu)
 
 	nominal_perf = perf_caps.nominal_perf;
 
+	if (nominal_freq)
+		*nominal_freq = perf_caps.nominal_freq;
+
 	if (!highest_perf || !nominal_perf) {
 		pr_debug("CPU%d: highest or nominal performance missing\n", cpu);
 		return 0;
@@ -664,8 +674,12 @@ static u64 get_max_boost_ratio(unsigned int cpu)
 
 	return div_u64(highest_perf << SCHED_CAPACITY_SHIFT, nominal_perf);
 }
+
 #else
-static inline u64 get_max_boost_ratio(unsigned int cpu) { return 0; }
+static inline u64 get_max_boost_ratio(unsigned int cpu, u64 *nominal_freq)
+{
+	return 0;
+}
 #endif
 
 static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
@@ -675,9 +689,9 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	struct acpi_cpufreq_data *data;
 	unsigned int cpu = policy->cpu;
 	struct cpuinfo_x86 *c = &cpu_data(cpu);
+	u64 max_boost_ratio, nominal_freq = 0;
 	unsigned int valid_states = 0;
 	unsigned int result = 0;
-	u64 max_boost_ratio;
 	unsigned int i;
 #ifdef CONFIG_SMP
 	static int blacklisted;
@@ -827,16 +841,20 @@ static int acpi_cpufreq_cpu_init(struct cpufreq_policy *policy)
 	}
 	freq_table[valid_states].frequency = CPUFREQ_TABLE_END;
 
-	max_boost_ratio = get_max_boost_ratio(cpu);
+	max_boost_ratio = get_max_boost_ratio(cpu, &nominal_freq);
 	if (max_boost_ratio) {
-		unsigned int freq = freq_table[0].frequency;
+		unsigned int freq = nominal_freq;
 
 		/*
-		 * Because the loop above sorts the freq_table entries in the
-		 * descending order, freq is the maximum frequency in the table.
-		 * Assume that it corresponds to the CPPC nominal frequency and
-		 * use it to set cpuinfo.max_freq.
+		 * The loop above sorts the freq_table entries in the
+		 * descending order. If ACPI CPPC has not advertised
+		 * the nominal frequency (this is possible in CPPC
+		 * revisions prior to 3), then use the first entry in
+		 * the pstate table as a proxy for nominal frequency.
 		 */
+		if (!freq)
+			freq = freq_table[0].frequency;
+
 		policy->cpuinfo.max_freq = freq * max_boost_ratio >> SCHED_CAPACITY_SHIFT;
 	} else {
 		/*

drivers/cpufreq/airoha-cpufreq.c

@@ -0,0 +1,152 @@
+// SPDX-License-Identifier: GPL-2.0
+
+#include <linux/bitfield.h>
+#include <linux/cpufreq.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/slab.h>
+
+#include "cpufreq-dt.h"
+
+struct airoha_cpufreq_priv {
+	int opp_token;
+	struct dev_pm_domain_list *pd_list;
+	struct platform_device *cpufreq_dt;
+};
+
+static struct platform_device *cpufreq_pdev;
+
+/* NOP function to disable OPP from setting clock */
+static int airoha_cpufreq_config_clks_nop(struct device *dev,
+					  struct opp_table *opp_table,
+					  struct dev_pm_opp *opp,
+					  void *data, bool scaling_down)
+{
+	return 0;
+}
+
+static const char * const airoha_cpufreq_clk_names[] = { "cpu", NULL };
+static const char * const airoha_cpufreq_pd_names[] = { "perf" };
+
+static int airoha_cpufreq_probe(struct platform_device *pdev)
+{
+	const struct dev_pm_domain_attach_data attach_data = {
+		.pd_names = airoha_cpufreq_pd_names,
+		.num_pd_names = ARRAY_SIZE(airoha_cpufreq_pd_names),
+		.pd_flags = PD_FLAG_DEV_LINK_ON | PD_FLAG_REQUIRED_OPP,
+	};
+	struct dev_pm_opp_config config = {
+		.clk_names = airoha_cpufreq_clk_names,
+		.config_clks = airoha_cpufreq_config_clks_nop,
+	};
+	struct platform_device *cpufreq_dt;
+	struct airoha_cpufreq_priv *priv;
+	struct device *dev = &pdev->dev;
+	struct device *cpu_dev;
+	int ret;
+
+	/* CPUs refer to the same OPP table */
+	cpu_dev = get_cpu_device(0);
+	if (!cpu_dev)
+		return -ENODEV;
+
+	priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+	if (!priv)
+		return -ENOMEM;
+
+	/* Set OPP table conf with NOP config_clks */
+	priv->opp_token = dev_pm_opp_set_config(cpu_dev, &config);
+	if (priv->opp_token < 0)
+		return dev_err_probe(dev, priv->opp_token, "Failed to set OPP config\n");
+
+	/* Attach PM for OPP */
+	ret = dev_pm_domain_attach_list(cpu_dev, &attach_data,
+					&priv->pd_list);
+	if (ret)
+		goto clear_opp_config;
+
+	cpufreq_dt = platform_device_register_simple("cpufreq-dt", -1, NULL, 0);
+	ret = PTR_ERR_OR_ZERO(cpufreq_dt);
+	if (ret) {
+		dev_err(dev, "failed to create cpufreq-dt device: %d\n", ret);
+		goto detach_pm;
+	}
+
+	priv->cpufreq_dt = cpufreq_dt;
+	platform_set_drvdata(pdev, priv);
+
+	return 0;
+
+detach_pm:
+	dev_pm_domain_detach_list(priv->pd_list);
+clear_opp_config:
+	dev_pm_opp_clear_config(priv->opp_token);
+
+	return ret;
+}
+
+static void airoha_cpufreq_remove(struct platform_device *pdev)
+{
+	struct airoha_cpufreq_priv *priv = platform_get_drvdata(pdev);
+
+	platform_device_unregister(priv->cpufreq_dt);
+
+	dev_pm_domain_detach_list(priv->pd_list);
+
+	dev_pm_opp_clear_config(priv->opp_token);
+}
+
+static struct platform_driver airoha_cpufreq_driver = {
+	.probe = airoha_cpufreq_probe,
+	.remove = airoha_cpufreq_remove,
+	.driver = {
+		.name = "airoha-cpufreq",
+	},
+};
+
+static const struct of_device_id airoha_cpufreq_match_list[] __initconst = {
+	{ .compatible = "airoha,en7581" },
+	{},
+};
+MODULE_DEVICE_TABLE(of, airoha_cpufreq_match_list);
+
+static int __init airoha_cpufreq_init(void)
+{
+	struct device_node *np = of_find_node_by_path("/");
+	const struct of_device_id *match;
+	int ret;
+
+	if (!np)
+		return -ENODEV;
+
+	match = of_match_node(airoha_cpufreq_match_list, np);
+	of_node_put(np);
+	if (!match)
+		return -ENODEV;
+
+	ret = platform_driver_register(&airoha_cpufreq_driver);
+	if (unlikely(ret < 0))
+		return ret;
+
+	cpufreq_pdev = platform_device_register_data(NULL, "airoha-cpufreq",
+						     -1, match, sizeof(*match));
+	ret = PTR_ERR_OR_ZERO(cpufreq_pdev);
+	if (ret)
+		platform_driver_unregister(&airoha_cpufreq_driver);
+
+	return ret;
+}
+module_init(airoha_cpufreq_init);
+
+static void __exit airoha_cpufreq_exit(void)
+{
+	platform_device_unregister(cpufreq_pdev);
+	platform_driver_unregister(&airoha_cpufreq_driver);
+}
+module_exit(airoha_cpufreq_exit);
+
+MODULE_AUTHOR("Christian Marangi <[email protected]>");
+MODULE_DESCRIPTION("CPUfreq driver for Airoha SoCs");
+MODULE_LICENSE("GPL");