ath79: fix build of big images for TP RE355v1, RE450v1 & v2

After merge of openwrt/openwrt#20709 I noticed,
that https://mirror-03.infra.openwrt.org/snapshots/targets/ath79/tiny/
still does not contain the build for RE450.

I analyzed the problem and noticed, that only builds which fits into
original size can be build and if the image is larger, it fails with
the following error: "WARNING: Image file .../openwrt/build_dir/
target-mips_24kc_musl/linux-ath79_tiny/tmp/
openwrt-ath79-tiny-tplink_re450-v1-squashfs-sysupgrade.bin is too big:
  > 7864320".

This error is quite misleading as the image is smaller than 7864320. The
reason for this error is that default tplink-safeloader has hardcoded
factory partition structure and fails to generate any file.

Rather then fixing tplink-safeloader I followed approach from commit
ebd5e5f ("ramips: switched TP-Link RE305 v1 to new partition layout")
and switched away from "tplink-safeloader sysupgrade".

I did not include "IMAGES := sysupgrade.bin", because with tiny target it
is still possible to locally build even factory image.

Fixes commit e768731 ("ath79: switch TP-Link RE355 v1, RE450 v1 and
RE450 v2 to mtd-concat").

Signed-off-by: Radek Dostál <[email protected]>
Link: openwrt/openwrt#21158
Signed-off-by: Hauke Mehrtens <[email protected]>
(cherry picked from commit bdbb4bd)

Author: dasty

target/linux/ath79/image/tiny-tp-link.mk

@@ -9,6 +9,7 @@ define Device/tplink_rex5x-v1
   DEVICE_COMPAT_VERSION := 2.0
   DEVICE_COMPAT_MESSAGE := Partition layout has changed compared to older versions by utilizing unused flash. \
     Upgrade via sysupgrade mechanism (-F) will only work if flashed image still fits to the size of old partition (6016 KiB).
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
 endef
 
 define Device/tplink_re355-v1
@@ -40,6 +41,7 @@ define Device/tplink_re450-v2
   DEVICE_COMPAT_VERSION := 2.0
   DEVICE_COMPAT_MESSAGE := Partition layout has changed compared to older versions by utilizing unused flash. \
     Upgrade via sysupgrade mechanism (-F) will only work if flashed image still fits to the size of old partition (6016 KiB).
+  IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | check-size | append-metadata
   TPLINK_BOARD_ID := RE450-V2
   LOADER_TYPE := elf
 endef