ALTEON-TS-NETWORK-MIB

-- COPYRIGHT NOTICE
-- Copyright (c) Alteon WebSystems, Inc. 2001
-- All rights reserved
-- 
-- HISTORY
-- $Log: tigonNetwork.mib,v $
-- Revision 1.1.1.1  2004/11/01 16:55:42  maxbaker
-- initial import
--
-- Revision work_rmundhra/41 2001/11/28 23:04:47 rmundhra
-- 	Fixed CR Q00173292: Require apply action after delete ospf
-- 	area entry.
-- 	Made delete functionality work thr'o standard mib and doing
-- 	the ospf config validation i.e if the delete is allowed or
-- 	not in the rs_routines rather than in an apply as being done
-- 	previously. Removed the ospfNewCfgAreaDelete mib object.
-- 
-- Revision ge_wyin/1 2001/11/28 17:58:45 wyin
-- 	Corrected description on ospf auth type.
-- 
-- Revision work_rmundhra/38 2001/11/27 23:45:27 rmundhra
-- 	Fixed the enum values for ospfAreaAuthType to be 1 and 2 as
-- 	0 is not allowed.
-- 
-- Revision work_rmundhra/36 2001/11/07 00:53:39 rmundhra
-- 	Added entries ospfCurCfgAreaAuthType and ospfNewCfgAreaAuthType as the
-- 	corresponding entry in rfc1850.mib has been declared obsolete.
-- 
-- Revision work_rmundhra/34 2001/10/30 19:37:28 rmundhra
-- 	Added 2 mib entries ospfAreaInfoId and ospfIfInfoIpAddress
-- 	to map the private mib tables with the standard RFC1850
-- 	mib as the way they are indexed is different.
-- 
-- Revision ge_rrekha/2 2001/10/23 00:16:18 rrekha
-- 	Added enumeration ospf(13) to MIB object ipRouteInfoTag.
-- 
-- Revision work_rmundhra/32 2001/10/13 02:12:42 rmundhra
-- 	Changed the indexing of ospfCurCfgAreaTable and
-- 	ospfNewCfgAreaTable to be indexed by 2 indicies.
-- 	Added MIB objects ospfCurCfgAreaId, ospfNewCfgAreaId
-- 	and removed ospfCurCfgAreaDelete as its redundant.
-- 
-- Revision work_rmundhra/30 2001/09/13 19:04:12 rmundhra
-- 	Modified comment.
-- 
-- Revision work_rmundhra/28 2001/09/13 18:36:58 rmundhra
-- 	Added MIB objects ospfIntfTableMaxSize, ospfAreaTableMaxSize,
--      ospfRangeTableMaxSize, ospfVirtIntfTableMaxSize &
-- 	ospfHostTableMaxSize.
-- 
-- Revision work_rmundhra/26 2001/09/11 23:48:34 rmundhra
-- 	Fixed 13071: Added MIB objects ospfCurCfgAreaDelete and
-- 	ospfNewCfgAreaDelete objects to support delete functionality
-- 	thro tigonNetwork.mib as this functionality cannot be 
-- 	provided thr'o std-mibs.
-- 
-- Revision work_rmundhra/24 2001/07/10 22:12:41 rmundhra
-- 	Keeping again.
-- 
-- Revision jmoLatest_jamesob/4 2001/07/02 22:03:26 jamesob
-- 	CR11586 - Added ripCurCfgVip and ripNewCfgVip objects.
-- 
-- Revision work_rmundhra/21 2001/06/22 18:39:36 rmundhra
-- 	Modified description not to exceed 80 characters / 
--      line as per coding guidelines.
-- 
-- Revision work_rmundhra/20 2001/06/22 18:37:11 rmundhra
-- 	Added MIB objects ospfIntfInfoTable to retrieve information of
-- 	an OSPF interface.
-- 
-- Revision genie_rekha/19 2001/06/21 23:18:01 rekha
-- 	Fixed 11690: Changed ipNewCfgGwInterval and ipCurCfgGwInterval
-- 	range to 0..60 from 1..60 for consistency with CLI.
-- 
-- Revision genie_rekha/17 2001/06/20 01:11:05 rekha
-- 	Removed the range for the index field of a table as these should
-- 	be obtained from the maxTableSize MIB objects since the range
-- 	maybe different for AD3 versus AD4.
-- 
-- Revision work_rmundhra/17 2001/06/18 18:02:12 rmundhra
-- 	Added MIB objects ospf-info, ospfGeneralInfo, ospfAreaInfoTable for
-- 	providing SNMP support for OSPF information.
-- 
-- Revision work_rmundhra/15 2001/06/15 18:26:24 rmundhra
-- 	Associated ospfCfg with iprouting and not with switch beause
-- 	of relevance.
-- 
-- Revision work_rmundhra/14 2001/06/14 19:12:13 rmundhra
-- 	Added SNMP support for OSPF statistics. Added MIB objects
-- 	ospfStats, ospfGeneral, ospfInterface (Table), ospfArea (Table)
-- 
-- Revision genie_rekha/15 2001/06/14 17:41:33 rekha
-- 	Added MIB objects ipCurCfgGwVlan and ipNewCfgGwVlan.
-- 
-- Revision genie_rekha/13 2001/06/04 19:24:28 rekha
-- 	Added MIB objects to support VRRP oper commands.
-- 
-- Revision genie_rekha/11 2001/05/31 01:06:03 rekha
-- 	Added MIB objects vrrpInfoVirtRtrOwnership, vrrpInfoVirtRtrServer
-- 	and vrrpInfoVirtRtrProxy.
-- 
-- Revision genie_rekha/9 2001/05/29 22:54:39 rekha
-- 	Removed 'other' from most of the enumerations.
-- 
-- Revision work_rmundhra/10 2001/05/18 19:02:28 rmundhra
-- 	Added SNMP support for Tigon OSPF. Added entries
-- 	ospfGeneral, ospfCurCfgArea Table and ospfNewCfgArea
-- 	Table to the tigonNetwork mib and ctl files.
-- 
-- Revision genie_rekha/7 2001/05/11 23:01:27 rekha
-- 	CR4320: Added MIB object ripStatRoutesAgedOut.
-- 
-- Revision jmoLatest_jamesob/2 2001/03/27 12:52:05 jamesob
-- 	CR10892 VRRP: Track HSRP bu VLAN (HSRV)
-- 	Added MIB objects to support tracking of
-- 	HSRP by vlan. New Objects: vrrpCurCfgVirtRtrTckHsrv,
-- 	vrrpNewCfgVirtRtrTckHsrv
-- 	Added mib objects to support HSRV priority increment.
-- 	New objects: vrrpCurCfgGenTckHsrvInc, vrrpNewCfgGenTckHsrvInc
-- 	Added vrrpCurCfgVirtRtrGrpTckHsrv and vrrpCurCfgVirtRtrGrpTckHsrv
-- 	to support vrrp group track hsrv
-- 
-- Revision work_rmundhra/3 2001/03/01 16:43:52 rmundhra
-- 	Fixed 10832: OIDs changed in mib.
-- 
-- Revision work_rmundhra/2 2001/03/01 00:30:03 rmundhra
-- 	Corrected the oids associated with ipFwdCurCfgLocalTable,
-- 	ipFwdNewCfgLocalTable, ipFwdCurCfgState & ipFwdNewCfgState and
-- 	unused oid's which are obsoleted. 
-- 
-- Revision genie_rekha/5 2001/02/27 20:17:16 rekha
-- 	Added SNMP support for BOOTP relay per IP interface.
-- 
-- Revision genie_rekha/2 2001/02/08 18:18:03 rekha
-- 	As part of the code cleanup split the Tigon MIB into smaller
-- 	modules. Instead of altswitch.mib these 5 new modules should be
-- 	used.
-- 
-- $EndLog$
-- 
-- Version 10.0.x
--

ALTEON-TS-NETWORK-MIB DEFINITIONS ::= BEGIN

IMPORTS
    IpAddress, Counter, Gauge 
        FROM RFC1155-SMI
    OBJECT-TYPE
        FROM RFC-1212
    PhysAddress, DisplayString
        FROM RFC1213-MIB
    switch 
        FROM ALTEON-ROOT-MIB
    stats, information, operCmds
        FROM ALTEON-TIGON-SWITCH-MIB;

iprouting	  OBJECT IDENTIFIER ::= { switch 3 }
vrrp              OBJECT IDENTIFIER ::= { switch 15 }

ripStats  	  OBJECT IDENTIFIER ::= { stats  1 }
arpStats  	  OBJECT IDENTIFIER ::= { stats  3 }
routeStats  	  OBJECT IDENTIFIER ::= { stats  4 }
dnsStats  	  OBJECT IDENTIFIER ::= { stats  5 }
vrrpStats         OBJECT IDENTIFIER ::= { stats  9 }
ospfStats	  OBJECT IDENTIFIER ::= { stats  22 }

ip-info	  	  OBJECT IDENTIFIER ::= { information 3 }
vrrp-info         OBJECT IDENTIFIER ::= { information 4 }
ospfinfo          OBJECT IDENTIFIER ::= { information 5 }

vrrpOper          OBJECT IDENTIFIER ::= { operCmds 5 }

-- IP Configuration

ipInterfaceTableMax OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the IP interface table."
    ::= { iprouting 1 }

ipCurCfgIntfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgIntfEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of IP interface configuration."
    ::= { iprouting 2 }

ipCurCfgIntfEntry OBJECT-TYPE
    SYNTAX  IpCurCfgIntfEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the Ip interface table"
    INDEX   { ipCurCfgIntfIndex }
    ::= { ipCurCfgIntfTable 1 }

IpCurCfgIntfEntry ::= SEQUENCE {
    ipCurCfgIntfIndex         INTEGER,
    ipCurCfgIntfAddr          IpAddress,
    ipCurCfgIntfMask          IpAddress,
    ipCurCfgIntfBroadcast     IpAddress,
    ipCurCfgIntfVlan          INTEGER,
    ipCurCfgIntfState         INTEGER,
    ipCurCfgIntfBootpRelay    INTEGER
    }
 
ipCurCfgIntfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The interface number for which the IP information is related."
    ::= { ipCurCfgIntfEntry 1}

ipCurCfgIntfAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the interface."
    ::= { ipCurCfgIntfEntry 2 }

ipCurCfgIntfMask OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory  
    DESCRIPTION
        "The subnet mask of the interface."
    ::= { ipCurCfgIntfEntry 3 }

ipCurCfgIntfBroadcast OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory  
    DESCRIPTION
        "The broadcast address of the interface."
    ::= { ipCurCfgIntfEntry 4 }

ipCurCfgIntfVlan OBJECT-TYPE
    SYNTAX  INTEGER (1..4094)
    ACCESS  read-only
    STATUS  mandatory  
    DESCRIPTION
        "The VLAN associated with the interface."
    ::= { ipCurCfgIntfEntry 5 }

ipCurCfgIntfState OBJECT-TYPE
    SYNTAX  INTEGER { 
	enabled(2),
	disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory  
    DESCRIPTION
        "The state of the interface."
    ::= { ipCurCfgIntfEntry 6 }

ipCurCfgIntfBootpRelay OBJECT-TYPE
    SYNTAX  INTEGER { 
	enabled(1),
	disabled(2)
	}
    ACCESS  read-only
    STATUS  mandatory  
    DESCRIPTION
        "Enable/disable BOOTP relay."
    ::= { ipCurCfgIntfEntry 7 }

ipNewCfgIntfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgIntfEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of interface configuration in the New Configuration Block."
    ::= { iprouting 3 }

ipNewCfgIntfEntry OBJECT-TYPE
    SYNTAX  IpNewCfgIntfEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the Ip interface table"
    INDEX   { ipNewCfgIntfIndex }
    ::= { ipNewCfgIntfTable 1 }
 
IpNewCfgIntfEntry ::= SEQUENCE {
    ipNewCfgIntfIndex         INTEGER,
    ipNewCfgIntfAddr          IpAddress,
    ipNewCfgIntfMask          IpAddress,
    ipNewCfgIntfBroadcast     IpAddress,
    ipNewCfgIntfVlan          INTEGER,
    ipNewCfgIntfState         INTEGER,
    ipNewCfgIntfDelete	      INTEGER,
    ipNewCfgIntfBootpRelay    INTEGER
    }
 
ipNewCfgIntfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
	"The interface number for which the IP information is related."
    ::= { ipNewCfgIntfEntry 1 }

ipNewCfgIntfAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the interface."
    ::= { ipNewCfgIntfEntry 2 }

ipNewCfgIntfMask OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory  
    DESCRIPTION
        "The subnet mask of the interface."
    ::= { ipNewCfgIntfEntry 3 }

ipNewCfgIntfBroadcast OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory  
    DESCRIPTION
        "The broadcast address of the interface."
    ::= { ipNewCfgIntfEntry 4 }

ipNewCfgIntfVlan OBJECT-TYPE
    SYNTAX  INTEGER (1..4094)
    ACCESS  read-write
    STATUS  mandatory  
    DESCRIPTION
        "The VLAN associated with the interface."
    ::= { ipNewCfgIntfEntry 5 }

ipNewCfgIntfState OBJECT-TYPE
    SYNTAX  INTEGER { 
	enabled(2),
	disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory  
    DESCRIPTION
        "The state of the interface."
    ::= { ipNewCfgIntfEntry 6 }

ipNewCfgIntfDelete OBJECT-TYPE
    SYNTAX  INTEGER { 
	other(1),
        delete(2)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgIntfEntry 7 }

ipNewCfgIntfBootpRelay OBJECT-TYPE
    SYNTAX  INTEGER { 
	enabled(1),
	disabled(2)
	}
    ACCESS  read-write
    STATUS  mandatory  
    DESCRIPTION
        "Enable/disable BOOTP relay."
    ::= { ipNewCfgIntfEntry 8 }

-- IP Gateway Table Configuration

ipGatewayTableMax OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the IP gateway table."
    ::= { iprouting 4 }

ipCurCfgGwTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgGwEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of gateways  in the Current configuration Block."
    ::= { iprouting 5 }

ipCurCfgGwEntry OBJECT-TYPE
    SYNTAX  IpCurCfgGwEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the Ip gateway table"
    INDEX   { ipCurCfgGwIndex }
    ::= { ipCurCfgGwTable 1 }

IpCurCfgGwEntry ::= SEQUENCE {
    ipCurCfgGwIndex         INTEGER,
    ipCurCfgGwAddr          IpAddress,
    ipCurCfgGwInterval      INTEGER,
    ipCurCfgGwRetry         INTEGER,
    ipCurCfgGwState         INTEGER,
    ipCurCfgGwArp           INTEGER,
    ipCurCfgGwVlan          INTEGER
    }

ipCurCfgGwIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The gateway number for which the information is related."
    ::= { ipCurCfgGwEntry 1}

ipCurCfgGwAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the default gateway."
    ::= { ipCurCfgGwEntry 2 }

ipCurCfgGwInterval OBJECT-TYPE 
    SYNTAX  INTEGER (0..60)
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The interval between ping attempts." 
    ::= { ipCurCfgGwEntry 3 }

ipCurCfgGwRetry OBJECT-TYPE
    SYNTAX  INTEGER (1..120)   
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The number of failed attempts to declare the default gateway DOWN."
    ::= { ipCurCfgGwEntry 4 }

ipCurCfgGwState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The state of the default gateway."
    ::= { ipCurCfgGwEntry 5 }

ipCurCfgGwArp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        } 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The state of ARP only health checks."
    ::= { ipCurCfgGwEntry 6 }

ipNewCfgGwTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgGwEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of gateway configuration in the new configuration block."
    ::= { iprouting 6 }

ipCurCfgGwVlan OBJECT-TYPE
    SYNTAX  INTEGER (0..4094)   
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VLAN number for this gateway. The first 4 entries in the table 
         are only used for default gateway load balancing hence the VLAN 
         cannot be specified for the first 4 entries."
    ::= { ipCurCfgGwEntry 7 }

ipNewCfgGwEntry OBJECT-TYPE
    SYNTAX  IpNewCfgGwEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the Ip default gateway table"
    INDEX   { ipNewCfgGwIndex }
    ::= { ipNewCfgGwTable 1 }

IpNewCfgGwEntry ::= SEQUENCE {
    ipNewCfgGwIndex         INTEGER,
    ipNewCfgGwAddr          IpAddress,
    ipNewCfgGwInterval      INTEGER,
    ipNewCfgGwRetry         INTEGER,
    ipNewCfgGwState         INTEGER,
    ipNewCfgGwDelete        INTEGER,
    ipNewCfgGwArp           INTEGER,
    ipNewCfgGwVlan          INTEGER
    }

ipNewCfgGwIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The gateway number for which the information is related."
    ::= { ipNewCfgGwEntry 1}

ipNewCfgGwAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IP address of the default gateway."
    ::= { ipNewCfgGwEntry 2 }

ipNewCfgGwInterval OBJECT-TYPE 
    SYNTAX  INTEGER (0..60)
    ACCESS  read-write 
    STATUS  mandatory 
    DESCRIPTION 
        "The interval in seconds between ping attempts." 
    ::= { ipNewCfgGwEntry 3 }

ipNewCfgGwRetry OBJECT-TYPE
    SYNTAX  INTEGER (1..120)   
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The number of failed attempts to declare the default gateway DOWN."
    ::= { ipNewCfgGwEntry 4 }

ipNewCfgGwState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The state of the default gateway."
    ::= { ipNewCfgGwEntry 5 }

ipNewCfgGwDelete OBJECT-TYPE
    SYNTAX  INTEGER {
	other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other is returned. Setting the value to anything other 
         than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgGwEntry 6 }

ipNewCfgGwArp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The state of the ARP only health checks."
    ::= { ipNewCfgGwEntry 7 }

ipNewCfgGwVlan OBJECT-TYPE
    SYNTAX  INTEGER (0..4094)   
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The VLAN number for this gateway. The first 4 entries in the table 
         are only used for default gateway load balancing hence the VLAN 
         cannot be specified for the first 4 entries."
    ::= { ipNewCfgGwEntry 8 }

ipCurCfgStaticRouteTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpCurCfgStaticRouteEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of static routes in the current configuration block."
    ::= { iprouting 7 }

ipCurCfgStaticRouteEntry OBJECT-TYPE
    SYNTAX  IpCurCfgStaticRouteEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the static IP route table"
    INDEX   { ipCurCfgStaticRouteIndx }
    ::= { ipCurCfgStaticRouteTable 1 }

IpCurCfgStaticRouteEntry ::= SEQUENCE {
    ipCurCfgStaticRouteIndx         INTEGER,
    ipCurCfgStaticRouteDestIp       IpAddress,
    ipCurCfgStaticRouteMask         IpAddress,
    ipCurCfgStaticRouteGateway      IpAddress,
    ipCurCfgStaticRouteInterface    INTEGER
    }

ipCurCfgStaticRouteIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the static routing table."
    ::= { ipCurCfgStaticRouteEntry 1}

ipCurCfgStaticRouteDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The destination IP address of this route."
    ::= { ipCurCfgStaticRouteEntry 2}

ipCurCfgStaticRouteMask OBJECT-TYPE 
    SYNTAX  IpAddress
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The destination IP address of this route."
    ::= { ipCurCfgStaticRouteEntry 3}

ipCurCfgStaticRouteGateway OBJECT-TYPE 
    SYNTAX  IpAddress
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The destination IP address of this route."
    ::= { ipCurCfgStaticRouteEntry 4}

ipCurCfgStaticRouteInterface OBJECT-TYPE 
    SYNTAX  INTEGER
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The IP interface of this route.  The IP address of the specified 
         interface shall be use as source IP when performs routing."
    ::= { ipCurCfgStaticRouteEntry 5}

ipNewCfgStaticRouteTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpNewCfgStaticRouteEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of static routes in the new configuration block."
    ::= { iprouting 8 }

ipNewCfgStaticRouteEntry OBJECT-TYPE
    SYNTAX  IpNewCfgStaticRouteEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the static IP route table"
    INDEX   { ipNewCfgStaticRouteIndx }
    ::= { ipNewCfgStaticRouteTable 1 }

IpNewCfgStaticRouteEntry ::= SEQUENCE {
    ipNewCfgStaticRouteIndx         INTEGER,
    ipNewCfgStaticRouteDestIp       IpAddress,
    ipNewCfgStaticRouteMask         IpAddress,
    ipNewCfgStaticRouteGateway      IpAddress,
    ipNewCfgStaticRouteAction       INTEGER,
    ipNewCfgStaticRouteInterface    INTEGER
    }

ipNewCfgStaticRouteIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the static routing table."
    ::= { ipNewCfgStaticRouteEntry 1}

ipNewCfgStaticRouteDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The destination IP address of this route."
    ::= { ipNewCfgStaticRouteEntry 2}

ipNewCfgStaticRouteMask OBJECT-TYPE 
    SYNTAX  IpAddress
    ACCESS  read-write 
    STATUS  mandatory 
    DESCRIPTION 
        "The subnet mask of this route."
    ::= { ipNewCfgStaticRouteEntry 3}

ipNewCfgStaticRouteGateway OBJECT-TYPE 
    SYNTAX  IpAddress
    ACCESS  read-write 
    STATUS  mandatory 
    DESCRIPTION 
        "The IP address of the gateway for this route."
    ::= { ipNewCfgStaticRouteEntry 4}

ipNewCfgStaticRouteAction OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
       }  
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other is returned. Setting the value to anything other 
         than 2(delete) has no effect on the state of the row."
    ::= { ipNewCfgStaticRouteEntry 5 }

ipNewCfgStaticRouteInterface OBJECT-TYPE 
    SYNTAX  INTEGER
    ACCESS  read-write 
    STATUS  mandatory 
    DESCRIPTION 
        "The IP interface of this route.  The IP address of the specified 
         interface shall be use as source IP when performs routing."
    ::= { ipNewCfgStaticRouteEntry 6 }

-- Forwarding group 

ipForward         OBJECT IDENTIFIER ::= { iprouting 9 }
ripConfig	  OBJECT IDENTIFIER ::= { ipForward 1 }

ripCurCfgSupply OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(2),	
	disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable supplying route updates."
    ::= { ripConfig 1 }

ripNewCfgSupply OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable supplying route updates."
    ::= { ripConfig 2 }

ripCurCfgListen OBJECT-TYPE 
    SYNTAX  INTEGER {
        enabled(2),      
        disabled(3) 
	}
    ACCESS  read-only 
    STATUS  mandatory  
    DESCRIPTION 
        "Enable or disable listening to route updates." 
    ::= { ripConfig 3 }

ripNewCfgListen OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable listening to route updates."
    ::= { ripConfig 4 }

ripCurCfgDefListen OBJECT-TYPE 
    SYNTAX  INTEGER {
        enabled(2),      
        disabled(3) 
	}
    ACCESS  read-only 
    STATUS  mandatory  
    DESCRIPTION 
        "Enable or disable listening to default routes." 
    ::= { ripConfig 5 }

ripNewCfgDefListen OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable listening to default routes."
    ::= { ripConfig 6 }

ripCurCfgStaticSupply OBJECT-TYPE 
    SYNTAX  INTEGER {
        enabled(2),      
        disabled(3) 
	}
    ACCESS  read-only 
    STATUS  mandatory  
    DESCRIPTION 
        "Enable or disable supplying static route updates." 
    ::= { ripConfig 7 }

ripNewCfgStaticSupply OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable supplying static route updates."
    ::= { ripConfig 8 }

ripCurCfgUpdatePeriod OBJECT-TYPE
    SYNTAX  INTEGER  (1..120)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Update Period in seconds."
    ::= { ripConfig 9 }

ripNewCfgUpdatePeriod OBJECT-TYPE
    SYNTAX  INTEGER (1..120)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Update period in seconds."
    ::= { ripConfig 10 }

ripCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "RIP global state."
    ::= { ripConfig 11 }

ripNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Globally turn RIP on or off."
    ::= { ripConfig 12 }

ripCurCfgPoisonReverse OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "RIP poison reverse."
    ::= { ripConfig 13 }
 
ripNewCfgPoisonReverse OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "RIP poison reverse."
    ::= { ripConfig 14 }

ripCurCfgVip OBJECT-TYPE
      SYNTAX  INTEGER {
                enabled(2),
                disabled(3)
                }
      ACCESS  read-only
      STATUS  mandatory
      DESCRIPTION
              "Advertise VIP Host Routes."
      ::= { ripConfig 15 }

ripNewCfgVip OBJECT-TYPE
      SYNTAX  INTEGER {
                enabled(2),
                disabled(3)
                }
      ACCESS  read-write
      STATUS  mandatory
      DESCRIPTION
              "Advertise VIP Host Routes."
      ::= { ripConfig 16 }

-- Table to turn on/off forwarding per port

ipFwdCurCfgPortTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpFwdCurCfgPortEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of ports and their forwarding states"
    ::= { ipForward 2 }

ipFwdCurCfgPortEntry OBJECT-TYPE
    SYNTAX  IpFwdCurCfgPortEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the ipFwdCurCfgPortTable "
    INDEX   { ipFwdCurCfgPortIndex }
    ::= { ipFwdCurCfgPortTable 1 }

IpFwdCurCfgPortEntry ::= SEQUENCE {
    ipFwdCurCfgPortIndex	INTEGER,
    ipFwdCurCfgPortState	INTEGER
    }

ipFwdCurCfgPortIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port number for which the forwarding state information pertains."
    ::= { ipFwdCurCfgPortEntry 1 }
 
ipFwdCurCfgPortState OBJECT-TYPE
    SYNTAX  INTEGER {
	enabled(2),
	disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The forwarding state of the port."
    ::= { ipFwdCurCfgPortEntry 2 }

ipFwdNewCfgPortTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpFwdNewCfgPortEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of ports and their forwarding states"
    ::= { ipForward 3 }
 
ipFwdNewCfgPortEntry OBJECT-TYPE
    SYNTAX  IpFwdNewCfgPortEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the ipFwdNewCfgPortTable "
    INDEX   { ipFwdNewCfgPortIndex }
    ::= { ipFwdNewCfgPortTable 1 }
 
IpFwdNewCfgPortEntry ::= SEQUENCE {
    ipFwdNewCfgPortIndex           INTEGER,
    ipFwdNewCfgPortState           INTEGER
    }
 
ipFwdNewCfgPortIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The port number for which the forwarding state information pertains."
    ::= { ipFwdNewCfgPortEntry 1 }
 
ipFwdNewCfgPortState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write  
    STATUS  mandatory
    DESCRIPTION
        "The forwarding state of the port."
    ::= { ipFwdNewCfgPortEntry 2 }

--The following oid's are obsoleted and should not be used
--ipFwdCurCfgLocalSubnet  OBJECT IDENTIFIER ::= { ipForward 4 }   obsoleted
--ipFwdNewCfgLocalSubnet  OBJECT IDENTIFIER ::= { ipForward 5 }   obsoleted
--ipFwdCurCfgLocalMask    OBJECT IDENTIFIER ::= { ipForward 6 }   obsoleted
--ipFwdNewCfgLocalMask    OBJECT IDENTIFIER ::= { ipForward 7 }   obsoleted

ipFwdCurCfgLocalTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpFwdCurCfgLocalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of local network definition."
    ::= { ipForward 14 }

ipFwdCurCfgLocalEntry OBJECT-TYPE
    SYNTAX  IpFwdCurCfgLocalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the ipFwdCurCfgLocalTable "
    INDEX   { ipFwdCurCfgLocalIndex }
    ::= { ipFwdCurCfgLocalTable 1 }

IpFwdCurCfgLocalEntry ::= SEQUENCE {
    ipFwdCurCfgLocalIndex	INTEGER,
    ipFwdCurCfgLocalSubnet	IpAddress,
    ipFwdCurCfgLocalMask	IpAddress
    }

ipFwdCurCfgLocalIndex OBJECT-TYPE
    SYNTAX  INTEGER 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of ipFwdCurCfgLocalTable."
    ::= { ipFwdCurCfgLocalEntry 1 }

ipFwdCurCfgLocalSubnet OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current local IP subnet."
    ::= { ipFwdCurCfgLocalEntry 2 }

ipFwdCurCfgLocalMask OBJECT-TYPE 
    SYNTAX  IpAddress 
    ACCESS  read-only 
    STATUS  mandatory
    DESCRIPTION 
        "The current local IP subnet mask." 
    ::= { ipFwdCurCfgLocalEntry 3 } 
 
ipFwdNewCfgLocalTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpFwdNewCfgLocalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of local network definition."
    ::= { ipForward 15 }

ipFwdNewCfgLocalEntry OBJECT-TYPE
    SYNTAX  IpFwdNewCfgLocalEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the ipFwdNewCfgLocalTable "
    INDEX   { ipFwdNewCfgLocalIndex }
    ::= { ipFwdNewCfgLocalTable 1 }

IpFwdNewCfgLocalEntry ::= SEQUENCE {
    ipFwdNewCfgLocalIndex	INTEGER,
    ipFwdNewCfgLocalSubnet	IpAddress,
    ipFwdNewCfgLocalMask	IpAddress,
    ipFwdNewCfgLocalDelete      INTEGER
    }

ipFwdNewCfgLocalIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of ipFwdNewCfgLocalTable."
    ::= { ipFwdNewCfgLocalEntry 1 }

ipFwdNewCfgLocalSubnet OBJECT-TYPE 
    SYNTAX  IpAddress 
    ACCESS  read-write 
    STATUS  mandatory
    DESCRIPTION 
        "The new local IP subnet." 
    ::= { ipFwdNewCfgLocalEntry 2 }

ipFwdNewCfgLocalMask OBJECT-TYPE  
    SYNTAX  IpAddress  
    ACCESS  read-write  
    STATUS  mandatory
    DESCRIPTION  
        "The new local IP subnet mask."  
    ::= { ipFwdNewCfgLocalEntry 3 }

ipFwdNewCfgLocalDelete OBJECT-TYPE
    SYNTAX INTEGER { 
        other(1),
        delete(2)
	}
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than 2(delete) has no effect on the state of the row."
    ::= { ipFwdNewCfgLocalEntry 4 }

ipFwdCurCfgState OBJECT-TYPE
    SYNTAX  INTEGER {
        on(2),
        off(3)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "IP forwarding global state."
    ::= { ipForward 8 }

ipFwdNewCfgState OBJECT-TYPE
    SYNTAX  INTEGER { 
        on(2),
        off(3) 
	}
    ACCESS  read-write
    STATUS  mandatory  
    DESCRIPTION 
        "IP forwarding global state." 
    ::= { ipForward 9 }

ipFwdCurCfgDirectedBcast OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Enable or disable forwarding directed broadcasts."
    ::= { ipForward 10 }

ipFwdNewCfgDirectedBcast OBJECT-TYPE
    SYNTAX INTEGER {
        enabled(2),
        disabled(3)
	}
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
        "Enable or disable forwarding directed broadcasts."
    ::= { ipForward 11 }

ipFwdPortTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the IP Port table."
    ::= { ipForward 12 }

ipFwdLocalTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the Local table."
    ::= { ipForward 13 }

arpCurCfgReARPPeriod OBJECT-TYPE
    SYNTAX INTEGER (2..120)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "Re-ARP Period in seconds."
    ::= { iprouting 10 }

arpNewCfgReARPPeriod OBJECT-TYPE 
    SYNTAX  INTEGER (2..120)
    ACCESS  read-write
    STATUS  mandatory 
    DESCRIPTION 
        "Re-ARP Period in seconds." 
    ::= { iprouting 11 }

ipCurCfgGwMetric OBJECT-TYPE
    SYNTAX  INTEGER {
        strict(1),
        roundrobin(2)
        }  
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The default gateway metric."
    ::= { iprouting 12 }

ipNewCfgGwMetric OBJECT-TYPE
    SYNTAX  INTEGER {
        strict(1),
        roundrobin(2)
        }  
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The default gateway metric."
    ::= { iprouting 13 }

ipCurCfgBootpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IP address of BOOTP server."
    ::= { iprouting 14 }

ipNewCfgBootpAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IP address of BOOTP server."
    ::= { iprouting 15 }

ipCurCfgBootpAddr2 OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IP address of second BOOTP server."
    ::= { iprouting 16 }

ipNewCfgBootpAddr2 OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IP address of second BOOTP server."
    ::= { iprouting 17 }

ipCurCfgBootpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The state of BOOTP relay."
    ::= { iprouting 18 }

ipNewCfgBootpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(2),
        disabled(3)
        }
    ACCESS  read-write  
    STATUS  mandatory
    DESCRIPTION
        "The state of BOOTP relay."
    ::= { iprouting 19 }

ipStaticRouteTableMaxSize OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of rows in the Static Route table."
    ::= { iprouting 20 }

-- VRRP (Virtual Router Redundantcy Protocol) Group

vrrpGeneral       OBJECT IDENTIFIER ::= { vrrp 1 }

vrrpCurCfgGenState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable VRRP operation globally."
    ::= { vrrpGeneral 1 }

vrrpNewCfgGenState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable VRRP operation globally."
    ::= { vrrpGeneral 2 }

vrrpCurCfgGenTckVirtRtrInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other virtual routers."
    ::= { vrrpGeneral 3 }

vrrpNewCfgGenTckVirtRtrInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other virtual routers."
    ::= { vrrpGeneral 4 }

vrrpCurCfgGenTckIpIntfInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other router interfaces."
    ::= { vrrpGeneral 5 }

vrrpNewCfgGenTckIpIntfInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of other router interfaces."
    ::= { vrrpGeneral 6 }

vrrpCurCfgGenTckVlanPortInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the port state of ports that belongs to the 
         same virtual LAN as the virtual router."
    ::= { vrrpGeneral 7 }

vrrpNewCfgGenTckVlanPortInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the port state of ports that belongs to the 
         same virtual LAN as the virtual router."
    ::= { vrrpGeneral 8 }

vrrpCurCfgGenTckL4PortInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the Layer 4 port states. This is valid when 
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpGeneral 9 }

vrrpNewCfgGenTckL4PortInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the Layer 4 port states. This is valid when 
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpGeneral 10 }

vrrpCurCfgGenTckRServerInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of real servers under the virtual 
         server which is configured as a VRRP virtual router."
    ::= { vrrpGeneral 11 }

vrrpNewCfgGenTckRServerInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority. The priority is 
         adjusted by tracking the state of real servers under the virtual 
         server which is configured as a VRRP virtual router."
    ::= { vrrpGeneral 12 }

vrrpCurCfgGenTckHsrpInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority.  The
	 priority is adjusted by tracking the HSRP advertisements."
    ::= { vrrpGeneral 13 }

vrrpNewCfgGenTckHsrpInc OBJECT-TYPE
    SYNTAX  INTEGER (0..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The increment of VRRP virtual router priority.  The
         priority is adjusted by tracking the HSRP advertisements."
    ::= { vrrpGeneral 14 }

vrrpCurCfgGenHotstandby OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable hotstandby processing."
    ::= { vrrpGeneral 15 }

vrrpNewCfgGenHotstandby OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable hotstandby processing."
    ::= { vrrpGeneral 16 }

vrrpCurCfgGenTckHsrvInc OBJECT-TYPE
        SYNTAX  INTEGER (0..254)
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "The increment of VRRP virtual router priority.  The
                 priority is adjusted by tracking the HSRP advertisements
                 by VLAN."
        ::= { vrrpGeneral 17 }
 
vrrpNewCfgGenTckHsrvInc OBJECT-TYPE
        SYNTAX  INTEGER (0..254)
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "The increment of VRRP virtual router priority.  The
                 priority is adjusted by tracking the HSRP advertisements
                 by VLAN."
        ::= { vrrpGeneral 18 }

vrrpCurCfgVirtRtrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpCurCfgVirtRtrTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VRRP virtual routers configuration in current_config."
    ::= { vrrp 2 }
 
vrrpCurCfgVirtRtrTableEntry OBJECT-TYPE
    SYNTAX  VrrpCurCfgVirtRtrTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Information about a VRRP virtual router."
    INDEX   { vrrpCurCfgVirtRtrIndx }
    ::= { vrrpCurCfgVirtRtrTable 1 }
 
VrrpCurCfgVirtRtrTableEntry ::= SEQUENCE {
    vrrpCurCfgVirtRtrIndx         INTEGER,
    vrrpCurCfgVirtRtrID           INTEGER,
    vrrpCurCfgVirtRtrAddr         IpAddress,
    vrrpCurCfgVirtRtrIfIndex      INTEGER,
    vrrpCurCfgVirtRtrInterval     INTEGER,
    vrrpCurCfgVirtRtrPriority     INTEGER,
    vrrpCurCfgVirtRtrPreempt      INTEGER,
    vrrpCurCfgVirtRtrState        INTEGER,
    vrrpCurCfgVirtRtrSharing      INTEGER,
    vrrpCurCfgVirtRtrTckVirtRtr   INTEGER,
    vrrpCurCfgVirtRtrTckIpIntf    INTEGER,
    vrrpCurCfgVirtRtrTckVlanPort  INTEGER,
    vrrpCurCfgVirtRtrTckL4Port    INTEGER,
    vrrpCurCfgVirtRtrTckRServer   INTEGER,
    vrrpCurCfgVirtRtrTckHsrp      INTEGER,
    vrrpCurCfgVirtRtrTckHsrv      INTEGER
    }

vrrpCurCfgVirtRtrIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpCurCfgVirtRtrTableEntry 1 }

vrrpCurCfgVirtRtrID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpCurCfgVirtRtrTableEntry 2 }

vrrpCurCfgVirtRtrAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router IP address."
    ::= { vrrpCurCfgVirtRtrTableEntry 3 }

vrrpCurCfgVirtRtrIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
    ::= { vrrpCurCfgVirtRtrTableEntry 4 }

vrrpCurCfgVirtRtrInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds."
    ::= { vrrpCurCfgVirtRtrTableEntry 5 }

vrrpCurCfgVirtRtrPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual routers."
    ::= { vrrpCurCfgVirtRtrTableEntry 6 }

vrrpCurCfgVirtRtrPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
          VRRP virtual router preempts a low priority Master.

          enabled(1)  - allow preemption
          disabled(2) - prohibit preemption"
    ::= { vrrpCurCfgVirtRtrTableEntry 7 }

vrrpCurCfgVirtRtrState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrTableEntry 8 }

vrrpCurCfgVirtRtrSharing OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable load sharing of non-master virtual router."
    ::= { vrrpCurCfgVirtRtrTableEntry 9 }

vrrpCurCfgVirtRtrTckVirtRtr OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking other virtual routers for priority 
         adjustment. The priority increment is defined 
         in vrrpCurCfgGenTckVirtRtrInc."
    ::= { vrrpCurCfgVirtRtrTableEntry 10 }

vrrpCurCfgVirtRtrTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking other router interfaces for 
	 priority adjustment. The priority increment is defined 
	 in vrrpCurCfgGenTckIpIntfInc."
    ::= { vrrpCurCfgVirtRtrTableEntry 11 }

vrrpCurCfgVirtRtrTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports 
	 for priority adjustment. The priority increment is 
	 defined in vrrpCurCfgGenTckVlanPortInc."
    ::= { vrrpCurCfgVirtRtrTableEntry 12 }

vrrpCurCfgVirtRtrTckL4Port OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking Layer 4 port states for 
	 priority adjustment.  the priority increment is defined 
	 in vrrpCurCfgGenTckL4PortInc.  This is applied when 
	 virtual server is configured as a VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrTableEntry 13 }

vrrpCurCfgVirtRtrTckRServer OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking real server states for 
	 priority adjustment.  the priority increment is defined 
	 in vrrpCurCfgGenTckRServerInc.  This is applied when 
	 virtual server is configured as a VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrTableEntry 14 }

vrrpCurCfgVirtRtrTckHsrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking HSRP advertisements for 
	 priority adjustment.  the priority increment is defined 
	 in vrrpCurCfgGenTckHsrpInc.  This is applied when 
	 virtual server is configured as a VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrTableEntry 15 }

vrrpCurCfgVirtRtrTckHsrv OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Enable or disable tracking HSRP advertisements by VLAN for
                 priority adjustment.  The priority increment is defined
                 in vrrpCurCfgGenTckHsrvInc.  This is applied when
                 virtual server is configured as a VRRP virtual router."
        ::= { vrrpCurCfgVirtRtrTableEntry 16 }

vrrpNewCfgVirtRtrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpNewCfgVirtRtrTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VRRP virtual routers configuration in current_config."
    ::= { vrrp 3 }

vrrpNewCfgVirtRtrTableEntry OBJECT-TYPE
    SYNTAX  VrrpNewCfgVirtRtrTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Information about a VRRP virtual router."
    INDEX   { vrrpNewCfgVirtRtrIndx }
    ::= { vrrpNewCfgVirtRtrTable 1 }

VrrpNewCfgVirtRtrTableEntry ::= SEQUENCE {
    vrrpNewCfgVirtRtrIndx         INTEGER,
    vrrpNewCfgVirtRtrID           INTEGER,
    vrrpNewCfgVirtRtrAddr         IpAddress,
    vrrpNewCfgVirtRtrIfIndex      INTEGER,
    vrrpNewCfgVirtRtrInterval     INTEGER,
    vrrpNewCfgVirtRtrPriority     INTEGER,
    vrrpNewCfgVirtRtrPreempt      INTEGER,
    vrrpNewCfgVirtRtrState        INTEGER,
    vrrpNewCfgVirtRtrDelete       INTEGER,
    vrrpNewCfgVirtRtrSharing      INTEGER,
    vrrpNewCfgVirtRtrTckVirtRtr   INTEGER,
    vrrpNewCfgVirtRtrTckIpIntf    INTEGER,
    vrrpNewCfgVirtRtrTckVlanPort  INTEGER,
    vrrpNewCfgVirtRtrTckL4Port    INTEGER,
    vrrpNewCfgVirtRtrTckRServer   INTEGER,
    vrrpNewCfgVirtRtrTckHsrp      INTEGER,
    vrrpNewCfgVirtRtrTckHsrv      INTEGER
    }

vrrpNewCfgVirtRtrIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpNewCfgVirtRtrTableEntry 1 }

vrrpNewCfgVirtRtrID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpNewCfgVirtRtrTableEntry 2 }

vrrpNewCfgVirtRtrAddr OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router IP address."
    ::= { vrrpNewCfgVirtRtrTableEntry 3 }

vrrpNewCfgVirtRtrIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
   ::= { vrrpNewCfgVirtRtrTableEntry 4 }

vrrpNewCfgVirtRtrInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds."
    ::= { vrrpNewCfgVirtRtrTableEntry 5 }

vrrpNewCfgVirtRtrPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 6 }

vrrpNewCfgVirtRtrPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
         VRRP virtual router preempts a low priority Master.

         enabled(1)  - allow preemption
         disabled(2) - prohibit preemption"
    ::= { vrrpNewCfgVirtRtrTableEntry 7 }

vrrpNewCfgVirtRtrState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 8 }

vrrpNewCfgVirtRtrDelete OBJECT-TYPE
    SYNTAX  INTEGER { 
	other(1),
        delete(2)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than delete(2) has no effect on the state of the row."
    ::= { vrrpNewCfgVirtRtrTableEntry 9 }

vrrpNewCfgVirtRtrSharing OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable load sharing of non-master virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 10 }

vrrpNewCfgVirtRtrTckVirtRtr OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking other virtual routers for 
	 priority adjustment.  the priority increment is defined 
	 in vrrpNewCfgGenTckVirtRtrInc."
    ::= { vrrpNewCfgVirtRtrTableEntry 11 }

vrrpNewCfgVirtRtrTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
         "Enable or disable tracking other router interfaces for 
	  priority adjustment.  the priority increment is defined 
	  in vrrpNewCfgGenTckIpIntfInc."
    ::= { vrrpNewCfgVirtRtrTableEntry 12 }

vrrpNewCfgVirtRtrTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports 
	 for priority adjustment.  the priority increment is 
	 defined in vrrpNewCfgGenTckVlanPortInc."
    ::= { vrrpNewCfgVirtRtrTableEntry 13 }

vrrpNewCfgVirtRtrTckL4Port OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
     ACCESS  read-write
     STATUS  mandatory
     DESCRIPTION
         "Enable or disable tracking Layer 4 port states for 
	  priority adjustment.  the priority increment is defined 
	  in vrrpNewCfgGenTckL4PortInc.  This is applied when 
	  virtual server is configured as a VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 14 }

vrrpNewCfgVirtRtrTckRServer OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking real server states for 
	 priority adjustment.  the priority increment is defined 
	 in vrrpNewCfgGenTckRServerInc.  This is applied when 
	 virtual server is configured as a VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 15 }

vrrpNewCfgVirtRtrTckHsrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking HSRP advertisements for 
	 priority adjustment.  the priority increment is defined 
	 in vrrpNewCfgGenTckHsrpInc.  This is applied when 
	 virtual server is configured as a VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrTableEntry 16 }

vrrpNewCfgVirtRtrTckHsrv OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enable or disable tracking HSRP by VLAN advertisements for
                 priority adjustment.  The priority increment is defined
                 in vrrpNewCfgGenTckHsrvInc.  This is applied when
                 virtual server is configured as a VRRP virtual router."
        ::= { vrrpNewCfgVirtRtrTableEntry 17 }

-- VRRP Interface Table

vrrpCurCfgIfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpCurCfgIfTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VRRP interface configuration in current_config."
    ::= { vrrp 4 }
 
vrrpCurCfgIfTableEntry OBJECT-TYPE
    SYNTAX  VrrpCurCfgIfTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Information about a VRRP interface."
    INDEX   { vrrpCurCfgIfIndx }
    ::= { vrrpCurCfgIfTable 1 }
 
VrrpCurCfgIfTableEntry ::= SEQUENCE {
    vrrpCurCfgIfIndx         INTEGER,
    vrrpCurCfgIfAuthType     INTEGER,
    vrrpCurCfgIfPasswd       DisplayString
    }

vrrpCurCfgIfIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP interface index.  This is eqivalent to IfIndex."
    ::= { vrrpCurCfgIfTableEntry 1 }

vrrpCurCfgIfAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        simple-text-password(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Type of authentication being used.
	 none(1) - no authentication
	 simple-text-password(2) - use password specified in 
         vrrpCurCfgIfPasswd for authentication."
    ::= { vrrpCurCfgIfTableEntry 2 }

vrrpCurCfgIfPasswd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..7))
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The password for authentication."
    ::= { vrrpCurCfgIfTableEntry 3 }

vrrpNewCfgIfTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpNewCfgIfTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VRRP interface configuration in current_config."
    ::= { vrrp 5 }
 
vrrpNewCfgIfTableEntry OBJECT-TYPE
    SYNTAX  VrrpNewCfgIfTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Information about a VRRP interface."
    INDEX   { vrrpNewCfgIfIndx }
    ::= { vrrpNewCfgIfTable 1 }
 
VrrpNewCfgIfTableEntry ::= SEQUENCE {
    vrrpNewCfgIfIndx         INTEGER,
    vrrpNewCfgIfAuthType     INTEGER,
    vrrpNewCfgIfPasswd       DisplayString,
    vrrpNewCfgIfDelete       INTEGER
    }

vrrpNewCfgIfIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP interface index.  This is eqivalent to IfIndex."
    ::= { vrrpNewCfgIfTableEntry 1 }

vrrpNewCfgIfAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        simple-text-password(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Type of authentication being used.
	 none(1) - no authentication
	 simple-text-password(2) - use password specified in 
         vrrpNewCfgIfPasswd for authentication."
    ::= { vrrpNewCfgIfTableEntry 2 }

vrrpNewCfgIfPasswd OBJECT-TYPE
    SYNTAX  DisplayString (SIZE(0..7))
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The password for authentication."
    ::= { vrrpNewCfgIfTableEntry 3 }

vrrpNewCfgIfDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than delete(2) has no effect on the state of the row."
    ::= { vrrpNewCfgIfTableEntry 4 }

-- Failover Virtual Router Groups

vrrpCurCfgVirtRtrGrpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpCurCfgVirtRtrGrpTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VRRP virtual router group in current_config."
    ::= { vrrp 6 }

vrrpCurCfgVirtRtrGrpTableEntry OBJECT-TYPE
    SYNTAX  VrrpCurCfgVirtRtrGrpTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Information about a VRRP failover virtual router."
    INDEX   { vrrpCurCfgVirtRtrGrpIndx }
    ::= { vrrpCurCfgVirtRtrGrpTable 1 }

VrrpCurCfgVirtRtrGrpTableEntry ::= SEQUENCE {
    vrrpCurCfgVirtRtrGrpIndx         INTEGER,
    vrrpCurCfgVirtRtrGrpID           INTEGER,
    vrrpCurCfgVirtRtrGrpIfIndex      INTEGER,
    vrrpCurCfgVirtRtrGrpInterval     INTEGER,
    vrrpCurCfgVirtRtrGrpPriority     INTEGER,
    vrrpCurCfgVirtRtrGrpPreempt      INTEGER,
    vrrpCurCfgVirtRtrGrpState        INTEGER,
    vrrpCurCfgVirtRtrGrpSharing      INTEGER,
    vrrpCurCfgVirtRtrGrpTckVirtRtr   INTEGER,
    vrrpCurCfgVirtRtrGrpTckIpIntf    INTEGER,
    vrrpCurCfgVirtRtrGrpTckVlanPort  INTEGER,
    vrrpCurCfgVirtRtrGrpTckL4Port    INTEGER,
    vrrpCurCfgVirtRtrGrpTckRServer   INTEGER,
    vrrpCurCfgVirtRtrGrpTckHsrp      INTEGER,
    vrrpCurCfgVirtRtrGrpTckHsrv      INTEGER
    }
 
vrrpCurCfgVirtRtrGrpIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 1 }
 
vrrpCurCfgVirtRtrGrpID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 2 }
 
vrrpCurCfgVirtRtrGrpIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 3 }

vrrpCurCfgVirtRtrGrpInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 4 }

vrrpCurCfgVirtRtrGrpPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual routers."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 5 }

vrrpCurCfgVirtRtrGrpPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
         VRRP virtual router preempts a low priority Master.

         enabled(1)  - allow preemption
         disabled(2) - prohibit preemption"
   ::= { vrrpCurCfgVirtRtrGrpTableEntry 6 }

vrrpCurCfgVirtRtrGrpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 7 }

vrrpCurCfgVirtRtrGrpSharing OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable load sharing of non-master virtual router."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 8 }

vrrpCurCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking other virtual routers for
         priority adjustment.  the priority increment is defined
         in vrrpCurCfgGenTckVirtRtrInc."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 9 }

vrrpCurCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking other router interfaces for
         priority adjustment.  the priority increment is defined
         in vrrpCurCfgGenTckIpIntfInc."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 10 }

vrrpCurCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports
         for priority adjustment.  the priority increment is
         defined in vrrpCurCfgGenTckVlanPortInc."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 11 }

vrrpCurCfgVirtRtrGrpTckL4Port OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking Layer 4 port states for
         priority adjustment.  the priority increment is defined
         in vrrpCurCfgGenTckL4PortInc.  This is applied when
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 12 }

vrrpCurCfgVirtRtrGrpTckRServer OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking real server states for
         priority adjustment.  the priority increment is defined
         in vrrpCurCfgGenTckRServerInc.  This is applied when
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 13 }

vrrpCurCfgVirtRtrGrpTckHsrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking HSRP advertisements for
         priority adjustment.  the priority increment is defined
         in vrrpCurCfgGenTckHsrpInc.  This is applied when
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpCurCfgVirtRtrGrpTableEntry 14 }

vrrpCurCfgVirtRtrGrpTckHsrv OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
                }
        ACCESS  read-only
        STATUS  mandatory
        DESCRIPTION
                "Enable or disable tracking HSRP by VLAN advertisements for
                 priority adjustment.  The priority increment is defined
                 in vrrpCurCfgGenTckHsrvInc.  This is applied when
                 virtual server is configured as a VRRP virtual router."
        ::= { vrrpCurCfgVirtRtrGrpTableEntry 15 }

vrrpNewCfgVirtRtrGrpTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpNewCfgVirtRtrGrpTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VRRP virtual router group configuration in new_config."
    ::= { vrrp 7 }

vrrpNewCfgVirtRtrGrpTableEntry OBJECT-TYPE
    SYNTAX  VrrpNewCfgVirtRtrGrpTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "Information about a VRRP failover virtual router."
    INDEX   { vrrpNewCfgVirtRtrGrpIndx }
    ::= { vrrpNewCfgVirtRtrGrpTable 1 }
 
VrrpNewCfgVirtRtrGrpTableEntry ::= SEQUENCE {
    vrrpNewCfgVirtRtrGrpIndx         INTEGER,
    vrrpNewCfgVirtRtrGrpID           INTEGER,
    vrrpNewCfgVirtRtrGrpIfIndex      INTEGER,
    vrrpNewCfgVirtRtrGrpInterval     INTEGER,
    vrrpNewCfgVirtRtrGrpPriority     INTEGER,
    vrrpNewCfgVirtRtrGrpPreempt      INTEGER,
    vrrpNewCfgVirtRtrGrpState        INTEGER,
    vrrpNewCfgVirtRtrGrpDelete       INTEGER,
    vrrpNewCfgVirtRtrGrpSharing      INTEGER,
    vrrpNewCfgVirtRtrGrpTckVirtRtr   INTEGER,
    vrrpNewCfgVirtRtrGrpTckIpIntf    INTEGER,
    vrrpNewCfgVirtRtrGrpTckVlanPort  INTEGER,
    vrrpNewCfgVirtRtrGrpTckL4Port    INTEGER,
    vrrpNewCfgVirtRtrGrpTckRServer   INTEGER,
    vrrpNewCfgVirtRtrGrpTckHsrp      INTEGER,
    vrrpNewCfgVirtRtrGrpTckHsrv      INTEGER
    }
 
vrrpNewCfgVirtRtrGrpIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router table index."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 1 }
 
vrrpNewCfgVirtRtrGrpID OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router identifier."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 2 }
 
vrrpNewCfgVirtRtrGrpIfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The IfIndex that the VRRP virtual router is representing."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 3 }

vrrpNewCfgVirtRtrGrpInterval OBJECT-TYPE
    SYNTAX  INTEGER (1..255)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The time interval between VRRP advertisements in seconds."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 4 }

vrrpNewCfgVirtRtrGrpPriority OBJECT-TYPE
    SYNTAX  INTEGER (1..254)
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "The priority value to be used by the specified VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 5 }

vrrpNewCfgVirtRtrGrpPreempt OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "This is for controlling whether a higher priority Backup
         VRRP virtual router preempts a low priority Master.

         enabled(1)  - allow preemption
         disabled(2) - prohibit preemption"
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 6 }

vrrpNewCfgVirtRtrGrpState OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable the VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 7 }

vrrpNewCfgVirtRtrGrpDelete OBJECT-TYPE
    SYNTAX  INTEGER {
        other(1),
        delete(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to the value of 2 (delete), the entire row is deleted. 
         When read, other(1) is returned. Setting the value to anything 
         other than delete(2) has no effect on the state of the row."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 8 }

vrrpNewCfgVirtRtrGrpSharing OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable load sharing of non-master virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 9 }

vrrpNewCfgVirtRtrGrpTckVirtRtr OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking other virtual routers for
         priority adjustment.  the priority increment is defined
         in vrrpNewCfgGenTckVirtRtrInc."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 10 }

vrrpNewCfgVirtRtrGrpTckIpIntf OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking other router interfaces for
         priority adjustment.  the priority increment is defined
         in vrrpNewCfgGenTckIpIntfInc."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 11 }

vrrpNewCfgVirtRtrGrpTckVlanPort OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking port state of VLAN ports
         for priority adjustment.  the priority increment is
         defined in vrrpNewCfgGenTckVlanPortInc."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 12 }

vrrpNewCfgVirtRtrGrpTckL4Port OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking Layer 4 port states for
         priority adjustment.  the priority increment is defined
         in vrrpNewCfgGenTckL4PortInc.  This is applied when
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 13 }

vrrpNewCfgVirtRtrGrpTckRServer OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking real server states for
         priority adjustment.  the priority increment is defined
         in vrrpNewCfgGenTckRServerInc.  This is applied when
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 14 }

vrrpNewCfgVirtRtrGrpTckHsrp OBJECT-TYPE
    SYNTAX  INTEGER {
        enabled(1),
        disabled(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Enable or disable tracking HSRP advertisements for
         priority adjustment.  the priority increment is defined
         in vrrpNewCfgGenTckHsrpInc.  This is applied when
         virtual server is configured as a VRRP virtual router."
    ::= { vrrpNewCfgVirtRtrGrpTableEntry 15 }

vrrpNewCfgVirtRtrGrpTckHsrv OBJECT-TYPE
        SYNTAX  INTEGER {
                enabled(1),
                disabled(2)
                }
        ACCESS  read-write
        STATUS  mandatory
        DESCRIPTION
                "Enable or disable tracking HSRP by VLAN advertisements for
                 priority adjustment.  The priority increment is defined
                 in vrrpNewCfgGenTckHsrvInc.  This is applied when
                 virtual server is configured as a VRRP virtual router."
        ::= { vrrpNewCfgVirtRtrGrpTableEntry 16 }

vrrpVirtRtrTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of entries in VRRP virtual router table."
    ::= { vrrp 8 }

vrrpIfTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of entries in VRRP interface table."
    ::= { vrrp 9 }

vrrpVirtRtrGrpTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of entries in VRRP Group table."
    ::= { vrrp 10 }

-- Statistics

-- RIP Statistics Group

ripStatInPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of good RIP packets recieved."
    ::= { ripStats 1 }

ripStatOutPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of RIP packets transmitted."
    ::= { ripStats 2 }

ripStatInErrorPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of error RIP packets recieved."
    ::= { ripStats 3 }

ripStatRoutesAgedOut OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of RIP routes which have aged out."
    ::= { ripStats 4 }

-- ARP Statistics Group

arpStatEntries OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current number of ARP entries."
    ::= { arpStats 1 }

arpStatHighWater OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The highest number of ARP entries."
    ::= { arpStats 2 }

arpStatMaxEntries OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of ARP entries."
    ::= { arpStats 3 }

-- ROUTE Statistics Group

routeStatEntries OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The current number of IP routes."
    ::= { routeStats 1 }

routeStatHighWater OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The highest number of IP routes."
    ::= { routeStats 2 }

routeStatMaxEntries OBJECT-TYPE
    SYNTAX  Gauge 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The maximum number of IP routes."
    ::= { routeStats 3 }

-- DNS Statistics

dnsStatInGoodDnsRequests OBJECT-TYPE 
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION 
        "The number of good DNS requests which are received."
    ::= { dnsStats 1 }

dnsStatInBadDnsRequests OBJECT-TYPE 
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION 
        "The number of bad DNS requests which are received."
    ::= { dnsStats 2 }

-- The VRRP Statistics

vrrpStatInAdvers OBJECT-TYPE 
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION 
        "The number of good VRRP advertisements which are received."
    ::= { vrrpStats 1 }

vrrpStatOutAdvers OBJECT-TYPE 
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION 
        "The number of good VRRP advertisements which are transmitted."
    ::= { vrrpStats 2 }

vrrpStatOutBadAdvers OBJECT-TYPE 
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory 
    DESCRIPTION 
        "The number of bad VRRP advertisements which are received."
    ::= { vrrpStats 3 }

-- Information - Run-time IP Route Table 

ipRouteInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF IpRouteInfoEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of run-time IP routes."
    ::= { ip-info 1 }

ipRouteInfoEntry OBJECT-TYPE
    SYNTAX  IpRouteInfoEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the run-time IP route table"
    INDEX   { ipRouteInfoIndx }
    ::= { ipRouteInfoTable 1 }

IpRouteInfoEntry ::= SEQUENCE {
    ipRouteInfoIndx	        INTEGER,
    ipRouteInfoDestIp           IpAddress,
    ipRouteInfoMask             IpAddress,
    ipRouteInfoGateway          IpAddress,
    ipRouteInfoTag       	INTEGER,
    ipRouteInfoType       	INTEGER,
    ipRouteInfoInterface        INTEGER
    }

ipRouteInfoIndx OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of this route table."
    ::= { ipRouteInfoEntry 1 }

ipRouteInfoDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The destination IP address of this route."
    ::= { ipRouteInfoEntry 2 }

ipRouteInfoMask OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The destination IP mask of this route."
    ::= { ipRouteInfoEntry 3 }
 
ipRouteInfoGateway OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The next-hop router address for this route."
    ::= { ipRouteInfoEntry 4 }

ipRouteInfoTag OBJECT-TYPE
    SYNTAX  INTEGER {
	fixed(1),
  	icmp(2),
  	static(3),
	snmp(4),
	addr(5),
	rip(6),
	broadcast(7),
	martian(8),
	multicast(9),
        vip(10),
        bgp(11),
        none(12),
        ospf(13)
	}
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The tag-type for this route."
    ::= { ipRouteInfoEntry 5 }

ipRouteInfoType OBJECT-TYPE 
    SYNTAX  INTEGER {
	indirect(1),
	direct(2),
	local(3),
	broadcast(4),
	martian(5),
	multicast(6),
	other(7)
	}
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The type of the route." 
    ::= { ipRouteInfoEntry 6 }

ipRouteInfoInterface OBJECT-TYPE 
    SYNTAX  INTEGER
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The interface number for which the destination	address is applicable."
    ::= { ipRouteInfoEntry 7 }

--
-- IP OSPF configuration
--
ospfCfg           OBJECT IDENTIFIER ::= { iprouting 21 }
ospfGeneral	OBJECT IDENTIFIER ::= { ospfCfg 1 }

ospfCurCfgDefaultRouteMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777215)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"Specify the metric to be assigned."
    ::= { ospfGeneral 1 }

ospfNewCfgDefaultRouteMetric OBJECT-TYPE
    SYNTAX INTEGER (0..16777215)
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
	"Specify the metric to be assigned."
    ::= { ospfGeneral 2 }

ospfCurCfgDefaultRouteMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"Specify the AS External metric type to be assigned."
    ::= { ospfGeneral 3 }

ospfNewCfgDefaultRouteMetricType OBJECT-TYPE
    SYNTAX INTEGER {
        none(1),
        type1(2),
        type2(3)
        }
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
	"Specify the AS External metric type to be assigned."
    ::= { ospfGeneral 4 }

ospfIntfTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the OSPF Interface table."
    ::= { ospfGeneral 5 }

ospfAreaTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the OSPF Area table."
    ::= { ospfGeneral 6 }

ospfRangeTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the OSPF Range table."
    ::= { ospfGeneral 7 }

ospfVirtIntfTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the OSPF Virtual Interface
         table."
    ::= { ospfGeneral 8 }

ospfHostTableMaxSize OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
        "The maximum number of rows in the OSPF Host table."
    ::= { ospfGeneral 9 }

ospfCurCfgAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfCurCfgAreaEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Area configuration in the current_config."
    ::= { ospfCfg 2 }

ospfCurCfgAreaEntry OBJECT-TYPE
    SYNTAX OspfCurCfgAreaEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "Information about a OSPF area."
    INDEX { ospfCurCfgAreaIndex, ospfCurCfgAreaId }
    ::= { ospfCurCfgAreaTable 1 }
 
OspfCurCfgAreaEntry ::= SEQUENCE {
    ospfCurCfgAreaIndex         INTEGER,
    ospfCurCfgAreaId            IpAddress,
    ospfCurCfgAreaSpfInterval   INTEGER,
    ospfCurCfgAreaAuthType      INTEGER
    }
 
ospfCurCfgAreaIndex OBJECT-TYPE
    SYNTAX INTEGER (0..2)
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF area number for which the OSPF area table is related."
    ::= { ospfCurCfgAreaEntry 1}

ospfCurCfgAreaId OBJECT-TYPE
    SYNTAX IpAddress 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The IP Address of the OSPF area." 
    ::= { ospfCurCfgAreaEntry 2 }

ospfCurCfgAreaSpfInterval OBJECT-TYPE
    SYNTAX INTEGER (0..255) 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The SPF interval for the OSPF area." 
    ::= { ospfCurCfgAreaEntry 3 }

ospfCurCfgAreaAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        password(2)
        }
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "Type of authentication being used.
	 none(1) - no authentication
	 password(2) - use password."
    ::= { ospfCurCfgAreaEntry 4 }

ospfNewCfgAreaTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfNewCfgAreaEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Area configuration in the new_config."
    ::= { ospfCfg 3 }

ospfNewCfgAreaEntry OBJECT-TYPE
    SYNTAX OspfNewCfgAreaEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "Information about a OSPF area."
    INDEX { ospfNewCfgAreaIndex, ospfNewCfgAreaId }
    ::= { ospfNewCfgAreaTable 1 }
 
OspfNewCfgAreaEntry ::= SEQUENCE {
    ospfNewCfgAreaIndex         INTEGER,
    ospfNewCfgAreaId            IpAddress, 
    ospfNewCfgAreaSpfInterval   INTEGER,
    ospfNewCfgAreaAuthType      INTEGER
    }
 
ospfNewCfgAreaIndex OBJECT-TYPE
    SYNTAX INTEGER (0..2)
    ACCESS read-only 
    STATUS mandatory
    DESCRIPTION
	"The OSPF area number for which the OSPF area table is related."
    ::= { ospfNewCfgAreaEntry 1}

ospfNewCfgAreaId OBJECT-TYPE
    SYNTAX IpAddress 
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The IP Address of the OSPF area." 
    ::= { ospfNewCfgAreaEntry 2 }

ospfNewCfgAreaSpfInterval OBJECT-TYPE
    SYNTAX INTEGER (0..255) 
    ACCESS read-write
    STATUS mandatory
    DESCRIPTION
	"The SPF interval for the OSPF area." 
    ::= { ospfNewCfgAreaEntry 3 }

ospfNewCfgAreaAuthType OBJECT-TYPE
    SYNTAX  INTEGER {
        none(1),
        password(2)
        }
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "Type of authentication being used.
	 none(1) - no authentication
	 password(2) - use password."
    ::= { ospfNewCfgAreaEntry 4 }

-- Ospf Statistics 

-- Ospf Statistics for all interfaces and OSPF areas 
ospfGeneralStats       OBJECT IDENTIFIER ::= { ospfStats  1 }
ospfCumRxTxStats       OBJECT IDENTIFIER ::= { ospfGeneralStats  1 }
ospfCumNbrChangeStats  OBJECT IDENTIFIER ::= { ospfGeneralStats  2 }
ospfCumIntfChangeStats OBJECT IDENTIFIER ::= { ospfGeneralStats  3 }
ospfTimersKickOffStats OBJECT IDENTIFIER ::= { ospfGeneralStats  4 }

-- Ospf Statistics / Area
ospfArea	       OBJECT IDENTIFIER ::= { ospfStats  2 }

ospfAreaRxTxStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaRxTxStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Area Rx/Tx Statistics."
    ::= { ospfArea 1 }

ospfAreaRxTxStatsEntry OBJECT-TYPE
    SYNTAX OspfAreaRxTxStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "Rx Tx packet Statistics about a OSPF area."
    INDEX { ospfAreaRxTxIndex }
    ::= { ospfAreaRxTxStats 1 }
 
OspfAreaRxTxStatsEntry ::= SEQUENCE {
    ospfAreaRxTxIndex          INTEGER,
    ospfAreaRxPkts             Counter,
    ospfAreaTxPkts             Counter,
    ospfAreaRxHello            Counter,
    ospfAreaTxHello            Counter,
    ospfAreaRxDatabase         Counter,
    ospfAreaTxDatabase         Counter,
    ospfAreaRxlsReqs           Counter,
    ospfAreaTxlsReqs           Counter,
    ospfAreaRxlsAcks           Counter,
    ospfAreaTxlsAcks           Counter,
    ospfAreaRxlsUpdates        Counter,
    ospfAreaTxlsUpdates        Counter
    }

ospfAreaRxTxIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the ospf Area for which these statistics apply."
    ::= { ospfAreaRxTxStatsEntry 1 }

ospfAreaRxPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of OSPF packets received in this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 2 }
 
ospfAreaTxPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of OSPF packets transmitted in this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 3 }
 
ospfAreaRxHello OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets received in this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 4 }

ospfAreaTxHello OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets transmitted in this OSPF
         area."
    ::= { ospfAreaRxTxStatsEntry 5 }
 
ospfAreaRxDatabase OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 6 }

ospfAreaTxDatabase OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 7 }
 
ospfAreaRxlsReqs OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Request packets received for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 8 }

ospfAreaTxlsReqs OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Request packets transmitted for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 9 }

ospfAreaRxlsAcks OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Acknowledgement packets received for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 10 }
 
ospfAreaTxlsAcks OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Acknowledgement packets transmitted
         for this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 11 }

ospfAreaRxlsUpdates OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Update packets received for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 12 }
 
ospfAreaTxlsUpdates OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Update packets transmitted for 
         this OSPF area."
    ::= { ospfAreaRxTxStatsEntry 13 }


ospfAreaNbrChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaNbrChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Area Neighbour Statistics."
    ::= { ospfArea 2 }

ospfAreaNbrChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfAreaNbrChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "Area Neighbour Change Statistics about a OSPF area."
    INDEX { ospfAreaNbrIndex }
    ::= { ospfAreaNbrChangeStats 1 }
 
OspfAreaNbrChangeStatsEntry ::= SEQUENCE {
    ospfAreaNbrIndex  	       	INTEGER,
    ospfAreaNbrhello           	Counter,
    ospfAreaNbrStart           	Counter,
    ospfAreaNbrAdjointOk       	Counter,
    ospfAreaNbrNegotiationDone 	Counter,
    ospfAreaNbrExchangeDone     Counter,
    ospfAreaNbrBadRequests      Counter,
    ospfAreaNbrBadSequence      Counter,
    ospfAreaNbrLoadingDone      Counter,
    ospfAreaNbrN1way        	Counter,
    ospfAreaNbrRstAd        	Counter,
    ospfAreaNbrDown        	Counter
    }

ospfAreaNbrIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the ospf Area for which these statistics apply."
    ::= { ospfAreaNbrChangeStatsEntry 1 }

ospfAreaNbrhello OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets received from neighbours
         in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 2 }

ospfAreaNbrStart OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of neighbours in this state (i.e. an indication
         that  Hello packets should now be sent to the neighbour at intervals
         of HelloInterval seconds.) in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 3 }

ospfAreaNbrAdjointOk OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of decisions to be made (again) as to whether
         an adjacency should be established/maintained with the neighbour.
         for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 4 }

ospfAreaNbrNegotiationDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of neighbours in this state wherein the 
         Master/slave relationship has been negotiated, and sequence
         numbers have been exchanged, for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 5 }

ospfAreaNbrExchangeDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of neighbours in this state (i.e. in an
         adjacency's final state) having transimitted a full sequence 
         of Database Description packets, for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 6 }

ospfAreaNbrBadRequests OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of Link State Requests which have been received
         for a link state advertisement not contained in the database across
         this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 7 }

ospfAreaNbrBadSequence OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Database Description packets which have been
         received that either 
         a) has an unexpected DD sequence number
         b) Unexpectedly has the init bit set
         c) Has an options field differing from the last Options field
            received in a Database Description packet.
         Any of these conditions indicate that some error has occured during
         adjacency establishment for this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 8 }

ospfAreaNbrLoadingDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of link state updates received for all 
         out-of-date portions of the database in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 9 }

ospfAreaNbrN1way OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets received from neighbours, in
         which this router is not mentioned in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 10 }

ospfAreaNbrRstAd OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of times the Neighbour adjacency has been reset
         across this OPSF area."
    ::= { ospfAreaNbrChangeStatsEntry 11 }

ospfAreaNbrDown OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Neighbouring routers down (i.e. in the initial
         state of a neighbour conversation.) in this OSPF area."
    ::= { ospfAreaNbrChangeStatsEntry 12 }


ospfAreaChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Area Change Statistics."
    ::= { ospfArea 3 }

ospfAreaChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfAreaChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "Area  Change Statistics about a OSPF area."
    INDEX { ospfAreaIntfIndex }
    ::= { ospfAreaChangeStats 1 }
 
OspfAreaChangeStatsEntry ::= SEQUENCE {
    ospfAreaIntfIndex     	INTEGER,
    ospfAreaIntfHello           Counter,
    ospfAreaIntfDown           	Counter,
    ospfAreaIntfLoop       	Counter,
    ospfAreaIntfUnloop 		Counter,
    ospfAreaIntfWaitTimer     	Counter,
    ospfAreaIntfBackup	        Counter,
    ospfAreaIntfNbrChange       Counter
    }

ospfAreaIntfIndex OBJECT-TYPE
    SYNTAX    INTEGER
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The index of the OSPF Area for which these statistics apply."
    ::= { ospfAreaChangeStatsEntry 1 }

ospfAreaIntfHello OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The total number of Hello packets sent on this OSPF area."
    ::= { ospfAreaChangeStatsEntry 2 }

ospfAreaIntfDown OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The total number of interfaces down in this OSPF area."
    ::= { ospfAreaChangeStatsEntry 3 }

ospfAreaIntfLoop OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The total number of interfaces no longer connected to 
         the attatched network in this OSPF area."
    ::= { ospfAreaChangeStatsEntry 4 }

ospfAreaIntfUnloop OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The total number of interfaces connected to the attatched
	 network in this OSPF area.."
    ::= { ospfAreaChangeStatsEntry 5 }


ospfAreaIntfWaitTimer OBJECT-TYPE
    SYNTAX        Counter
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION
        "The total number of times the Wait Timer has been fired,
         (indicating the end of the waiting period that is required
          before electing a (Backup) Designated Router) for this 
          OSPF area."
    ::= { ospfAreaChangeStatsEntry 6 }

ospfAreaIntfBackup OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The total number of Backup Designated Routers on the attatched
         network for this OSPF area."
    ::= { ospfAreaChangeStatsEntry 7 }


ospfAreaIntfNbrChange OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The total number of changes in the set of bidirectional neighbours
         associated with the interface in this OSPF area."
    ::= { ospfAreaChangeStatsEntry 8 }


-- Ospf Statistics / Interface
ospfInterface	       OBJECT IDENTIFIER ::= { ospfStats  3 }

ospfIntfRxTxStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfRxTxStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Interface Rx/Tx packet Statistics."
    ::= { ospfInterface 1 }

ospfIntfRxTxStatsEntry OBJECT-TYPE
    SYNTAX OspfIntfRxTxStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "OSPF interface Rx/Tx packet statistics."
    INDEX { ospfIntfRxTxIndex }
    ::= { ospfIntfRxTxStats 1 }

OspfIntfRxTxStatsEntry ::= SEQUENCE {
    ospfIntfRxTxIndex          INTEGER,
    ospfIntfRxPkts             Counter,
    ospfIntfTxPkts             Counter,
    ospfIntfRxHello            Counter,
    ospfIntfTxHello            Counter,
    ospfIntfRxDatabase         Counter,
    ospfIntfTxDatabase         Counter,
    ospfIntfRxlsReqs           Counter,
    ospfIntfTxlsReqs           Counter,
    ospfIntfRxlsAcks           Counter,
    ospfIntfTxlsAcks           Counter,
    ospfIntfRxlsUpdates        Counter,
    ospfIntfTxlsUpdates        Counter
    }

ospfIntfRxTxIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The OSPF interface for which these statistics apply."
    ::= { ospfIntfRxTxStatsEntry 1 }

ospfIntfRxPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of OSPF packets received for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 2 }
 
ospfIntfTxPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of OSPF packets transmitted for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 3 }
 
ospfIntfRxHello OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets received 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 4 }

ospfIntfTxHello OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets transmitted 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 5 }
 
ospfIntfRxDatabase OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Database Description packets received 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 6 }

ospfIntfTxDatabase OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Database Description packets transmitted 
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 7 }
 
ospfIntfRxlsReqs OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Request packets received
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 8 }

ospfIntfTxlsReqs OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Request packets transmitted
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 9 }

ospfIntfRxlsAcks OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Acknowledgement packets received
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 10 }
 
ospfIntfTxlsAcks OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Acknowledgement packets transmitted
         for this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 11 }

ospfIntfRxlsUpdates OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Update packets received for 
         this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 12 }
 
ospfIntfTxlsUpdates OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Update packets transmitted for 
         this OSPF interface."
    ::= { ospfIntfRxTxStatsEntry 13 }


ospfIntfNbrChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfNbrChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Interface Neighbour change Statistics."
    ::= { ospfInterface 2 }

ospfIntfNbrChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfIntfNbrChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "OSPF interface Neighbour Change statistics."
    INDEX { ospfIntfNbrIndex }
    ::= { ospfIntfNbrChangeStats 1 }

OspfIntfNbrChangeStatsEntry ::= SEQUENCE {
    ospfIntfNbrIndex     	INTEGER,
    ospfIntfNbrhello           	Counter,
    ospfIntfNbrStart           	Counter,
    ospfIntfNbrAdjointOk       	Counter,
    ospfIntfNbrNegotiationDone 	Counter,
    ospfIntfNbrExchangeDone     Counter,
    ospfIntfNbrBadRequests      Counter,
    ospfIntfNbrBadSequence      Counter,
    ospfIntfNbrLoadingDone      Counter,
    ospfIntfNbrN1way        	Counter,
    ospfIntfNbrRstAd        	Counter,
    ospfIntfNbrDown        	Counter
    }

ospfIntfNbrIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the OSPF Interface for which these statistics apply."
    ::= { ospfIntfNbrChangeStatsEntry 1 }

ospfIntfNbrhello OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets received from neighbours
         in this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 2 }

ospfIntfNbrStart OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of neighbours in this state (i.e. an indication
         that  Hello packets should now be sent to the neighbour at intervals
         of HelloInterval seconds.) in this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry  3 }

ospfIntfNbrAdjointOk OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of decisions to be made (again) as to whether
         an adjacency should be established/maintained with the neighbour.
         for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 4 }

ospfIntfNbrNegotiationDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of neighbours in this state wherein the 
         Master/slave relationship has been negotiated, and sequence
         numbers have been exchanged, for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 5 }

ospfIntfNbrExchangeDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of neighbours in this state (i.e. in an
         adjacency's final state) having transimitted a full sequence 
         of Database Description packets, for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 6 }

ospfIntfNbrBadRequests OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Link State Requests which have been received
         for a link state advertisement not contained in the database for
         this interface."
    ::= { ospfIntfNbrChangeStatsEntry 7 }

ospfIntfNbrBadSequence OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Database Description packets which have been
         received that either 
         a) has an unexpected DD sequence number
         b) Unexpectedly has the init bit set
         c) Has an options field differing from the last Options field
            received in a Database Description packet.
         Any of these conditions indicate that some error has occured during
         adjacency establishment for this interface."
    ::= { ospfIntfNbrChangeStatsEntry 8 }

ospfIntfNbrLoadingDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of link state updates received for all 
         out-of-date portions of the database for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 9 }

ospfIntfNbrN1way OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Hello packets received from neighbours, in
         which this router is not mentioned for this OSPF interface."
    ::= { ospfIntfNbrChangeStatsEntry 10 }

ospfIntfNbrRstAd OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of times the Neighbour adjacency has been reset
         on this interface."
    ::= { ospfIntfNbrChangeStatsEntry 11 }

ospfIntfNbrDown OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Neighbouring routers down (i.e. in the initial
         state of a neighbour conversation.) for this interface."
    ::= { ospfIntfNbrChangeStatsEntry 12 }


ospfIntfChangeStats OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Interface change Statistics."
    ::= { ospfInterface 3 }

ospfIntfChangeStatsEntry OBJECT-TYPE
    SYNTAX OspfIntfChangeStatsEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "OSPF interface Change statistics."
    INDEX { ospfIntfIndex }
    ::= { ospfIntfChangeStats 1 }

OspfIntfChangeStatsEntry ::= SEQUENCE {
    ospfIntfIndex     	       	INTEGER,
    ospfIntfHello           	Counter,
    ospfIntfDown           	Counter,
    ospfIntfLoop       		Counter,
    ospfIntfUnloop 		Counter,
    ospfIntfWaitTimer     	Counter,
    ospfIntfBackup	        Counter,
    ospfIntfNbrChange       	Counter
    }

ospfIntfIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index of the OSPF Interface for which these statistics apply."
    ::= { ospfIntfChangeStatsEntry 1 }


ospfIntfHello OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The total number of Hello packets sent by this interface."
    ::= { ospfIntfChangeStatsEntry 2 }

ospfIntfDown OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The total number of times the interface was down."
    ::= { ospfIntfChangeStatsEntry 3 }

ospfIntfLoop OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The total number of times the interface was no longer connected to 
         the attatched network."
    ::= { ospfIntfChangeStatsEntry 4 }

ospfIntfUnloop OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The total number of times the interface, connected back to
         the attatched network."
    ::= { ospfIntfChangeStatsEntry 5 }

ospfIntfWaitTimer OBJECT-TYPE
    SYNTAX        Counter
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION
        "The total number of times the Wait Timer has been fired,
         (indicating the end of the waiting period that is required
          before electing a (Backup) Designated Router) for this 
          OSPF interface."
    ::= { ospfIntfChangeStatsEntry 6 }

ospfIntfBackup OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The total number of Backup Designated Routers on the attatched
         network for this OSPF interface."
    ::= { ospfIntfChangeStatsEntry 7 }

ospfIntfNbrChange OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The total number of changes in the set of bidirectional neighbours
         associated with the interface for this OSPF interface."
    ::= { ospfIntfChangeStatsEntry 8 }


-- Ospf General Statistics contains the cumulative stats for all
-- areas / interfaces
ospfCumRxPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all OSPF packets received on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 1 }
 
ospfCumTxPkts OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all OSPF packets transmitted on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 2 }
 
ospfCumRxHello OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Hello packets received on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 3 }

ospfCumTxHello OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Hello packets transmitted on all OSPF areas
         and interfaces."
    ::= { ospfCumRxTxStats 4 }
 
ospfCumRxDatabase OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Database Description packets received on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 5 }

ospfCumTxDatabase OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Database Description packets transmitted on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 6 }
 
ospfCumRxlsReqs OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Link State Request packets received on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 7 }

ospfCumTxlsReqs OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Link State Request packets transmitted on
         all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 8 }

ospfCumRxlsAcks OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Link State Acknowledgement packets received
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 9 }
 
ospfCumTxlsAcks OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Link State Acknowledgement packets transmitted
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 10 }

ospfCumRxlsUpdates OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Link State Update packets received
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 11 }
 
ospfCumTxlsUpdates OBJECT-TYPE
    SYNTAX  Counter 
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Link State Update packets transmitted
         on all OSPF areas and interfaces."
    ::= { ospfCumRxTxStats 12 }

ospfCumNbrhello OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total of all Hello packets received from neighbours
         on all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 1 }

ospfCumNbrStart OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of neighbours in this state (i.e. an indication
         that  Hello packets should now be sent to the neighbour at intervals
         of HelloInterval seconds.) across all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 2 }

ospfCumNbrAdjointOk OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of decisions to be made (again) as to whether
         an adjacency should be established/maintained with the neighbour
         across all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 3 }

ospfCumNbrNegotiationDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of neighbours in this state wherein the 
         Master/slave relationship has been negotiated, and sequence
         numbers have been exchanged, across all OSPF areas and 
         interfaces."
    ::= { ospfCumNbrChangeStats 4 }

ospfCumNbrExchangeDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of neighbours in this state (i.e. in an
         adjacency's final state) having transimitted a full sequence 
         of Database Description packets, across all OSPF areas
         and interfaces."
    ::= { ospfCumNbrChangeStats 5 }

ospfCumNbrBadRequests OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of Link State Requests which have been received
         for a link state advertisement not contained in the database across
         all interfaces and OSPF areas."
    ::= { ospfCumNbrChangeStats 6 }

ospfCumNbrBadSequence OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of Database Description packets which have been
         received that either 
         a) has an unexpected DD sequence number
         b) Unexpectedly has the init bit set
         c) Has an options field differing from the last Options field
            received in a Database Description packet.
         Any of these conditions indicate that some error has occured during
         adjacency establishment for all OSPF areas and interfaces."
    ::= { ospfCumNbrChangeStats 7 }

ospfCumNbrLoadingDone OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of link state updates received for all 
         out-of-date portions of the database across all OSPF areas
         and interfaces."
    ::= { ospfCumNbrChangeStats 8 }

ospfCumNbrN1way OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of Hello packets received from neighbours, in
         which this router is not mentioned across all OSPF interfaces
         and areas."
    ::= { ospfCumNbrChangeStats 9 }

ospfCumNbrRstAd OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The sum total number of times the Neighbour adjacency has been reset
         across all OPSF areas and interfaces."
    ::= { ospfCumNbrChangeStats 10 }

ospfCumNbrDown OBJECT-TYPE
    SYNTAX  Counter
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The total number of Neighbouring routers down (i.e. in the initial
         state of a neighbour conversation.) across all OSPF areas and 
         interfaces."
    ::= { ospfCumNbrChangeStats 11 }

ospfCumIntfHello OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The sum total number of Hello packets sent on all interfaces 
         and areas"
    ::= { ospfCumIntfChangeStats 1 }

ospfCumIntfDown OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The sum total number of interfaces down in all OSPF areas."
    ::= { ospfCumIntfChangeStats 2 }

ospfCumIntfLoop OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The sum total of interfaces no longer connected to 
         the attatched network across all OSPF areas and interfaces."
    ::= { ospfCumIntfChangeStats 3 }

ospfCumIntfUnloop OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The sum total number of interfaces, connected to
         the attatched network in all OSPF areas."
    ::= { ospfCumIntfChangeStats 4 }

ospfCumIntfWaitTimer OBJECT-TYPE
    SYNTAX        Counter
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION
        "The sum total number of times the Wait Timer has been fired,
         (indicating the end of the waiting period that is required
          before electing a (Backup) Designated Router) across all 
          OSPF areas and interfaces."
    ::= { ospfCumIntfChangeStats 5 }

ospfCumIntfBackup OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The sum total number of Backup Designated Routers on the attatched
         network for all OSPF areas and interfaces."
    ::= { ospfCumIntfChangeStats 6 }

ospfCumIntfNbrChange OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The sum total number of changes in the set of bidirectional
         neighbours associated with any interface across all OSPF areas."
    ::= { ospfCumIntfChangeStats 7 }

ospfTmrsKckOffHello OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The sum total number of times the Hello timer has been fired
         (which triggers the send of a Hello packet) across all OPSF 
         areas and interfaces."
    ::= { ospfTimersKickOffStats 1 }

ospfTmrsKckOffRetransmit OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The sum total number of times the Retransmit timer has been
         fired across all OPSF areas and interfaces."
    ::= { ospfTimersKickOffStats 2 }

ospfTmrsKckOffLsaLock OBJECT-TYPE
    SYNTAX    Counter
    ACCESS    read-only
    STATUS    mandatory
    DESCRIPTION
        "The sum total number of times the Lsa Lock timer has been 
         fired across all OSPF areas and interfaces."
    ::= { ospfTimersKickOffStats 3 }

ospfTmrsKckOffLsaAck OBJECT-TYPE
    SYNTAX   Counter
    ACCESS   read-only
    STATUS   mandatory
    DESCRIPTION
        "The sum total number of times the Lsa Ack timer has been 
         fired across all ospf areas and interfaces."
    ::= { ospfTimersKickOffStats 4 }

ospfTmrsKckOffDbage OBJECT-TYPE
    SYNTAX        Counter
    ACCESS        read-only
    STATUS        mandatory
    DESCRIPTION
        "The total number of times the Dbage has been fired."
    ::= { ospfTimersKickOffStats 5 }

ospfTmrsKckOffSummary OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The total number of times the Summary timer has been fired."
    ::= { ospfTimersKickOffStats 6 }

ospfTmrsKckOffAseExport OBJECT-TYPE
    SYNTAX     Counter
    ACCESS     read-only
    STATUS     mandatory
    DESCRIPTION
        "The total number of times the ASE Export timer has been fired."
    ::= { ospfTimersKickOffStats 7 }


-- Ospf Information 

ospfGeneralInfo  OBJECT IDENTIFIER ::= { ospfinfo 1 }

ospfStartTime OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The time when ospf has been started."   
    ::= { ospfGeneralInfo 1 }

ospfProcessUptime OBJECT-TYPE   
    SYNTAX  Counter 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The time since ospf has been started."   
    ::= { ospfGeneralInfo 2 }

ospfLsTypesSupported OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The Link State Types that are supported."   
    ::= { ospfGeneralInfo 3 }

ospfIntfCountForRouter OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The number of interfaces for this router." 
    ::= { ospfGeneralInfo 4 }

ospfVlinkCountForRouter OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The number of virtual links for this router." 
    ::= { ospfGeneralInfo 5 }

ospfTotalNeighbours OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The total number of OSPF neighbours." 
    ::= { ospfGeneralInfo 6 }

ospfNbrInInitState OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The number of neighbours in the initial state of exchange." 
    ::= { ospfGeneralInfo 7 }

ospfNbrInExchState OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The number of neighbours in the exchange state." 
    ::= { ospfGeneralInfo 8 }

ospfNbrInFullState OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The number of neighbours in the Full state of exchange." 
    ::= { ospfGeneralInfo 9 }

ospfTotalAreas OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The Total number of areas." 
    ::= { ospfGeneralInfo 10 }

ospfTotalTransitAreas OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The Total number of Transit areas." 
    ::= { ospfGeneralInfo 11 }

ospfTotalNssaAreas OBJECT-TYPE   
    SYNTAX  INTEGER 
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The Total number of NSSA areas." 
    ::= { ospfGeneralInfo 12 }

ospfAreaInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfAreaInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Area information."
    ::= { ospfinfo 2 }

ospfAreaInfoEntry OBJECT-TYPE
    SYNTAX OspfAreaInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "Information about a OSPF area."
    INDEX { ospfAreaInfoIndex }
    ::= { ospfAreaInfoTable 1 }
 
OspfAreaInfoEntry ::= SEQUENCE {
    ospfAreaInfoIndex             INTEGER,
    ospfTotalNumberOfInterfaces   INTEGER,
    ospfNumberOfInterfacesUp   	  INTEGER,
    ospfNumberOfLsdbEntries   	  INTEGER,
    ospfAreaInfoId   	          IpAddress

    }
 
ospfAreaInfoIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF area number for which the OSPF info table is related."
    ::= { ospfAreaInfoEntry 1}

ospfTotalNumberOfInterfaces OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The total number of interfaces for this OSPF area." 
    ::= { ospfAreaInfoEntry 2}

ospfNumberOfInterfacesUp OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The number of interfaces UP in area." 
    ::= { ospfAreaInfoEntry 3}

ospfNumberOfLsdbEntries OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The number of Link State Database entries for this OSPF area." 
    ::= { ospfAreaInfoEntry 4}

ospfAreaInfoId OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The IP address of the OSPF area." 
    ::= { ospfAreaInfoEntry 5}

ospfIntfInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfIntfInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Interface information."
    ::= { ospfinfo 3 }

ospfIntfInfoEntry OBJECT-TYPE
    SYNTAX OspfIntfInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "Information about a OSPF interface."
    INDEX { ospfIfInfoIndex }
    ::= { ospfIntfInfoTable 1 }
 
OspfIntfInfoEntry ::= SEQUENCE {
    ospfIfInfoIndex               	INTEGER,
    ospfIfDesignatedRouterIP   	  	IpAddress,
    ospfIfBackupDesignatedRouterIP  	IpAddress,
    ospfIfWaitInterval   	        INTEGER,
    ospfIfTotalNeighbours   	  	INTEGER,
    ospfIfInfoIpAddress   	  	IpAddress
    }
 
ospfIfInfoIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF interface number for which the OSPF info table is related."
    ::= { ospfIntfInfoEntry 1}

ospfIfDesignatedRouterIP OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF Designated Router ID (IP Address) for this OSPF interface." 
    ::= { ospfIntfInfoEntry 2}

ospfIfBackupDesignatedRouterIP OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF Backup Designated Router ID (IP Address) for this OSPF
         interface." 
    ::= { ospfIntfInfoEntry 3}

ospfIfWaitInterval OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF Wait interval for this OSPF interface." 
    ::= { ospfIntfInfoEntry 4}

ospfIfTotalNeighbours OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The Total number of neighbours for this OSPF interface." 
    ::= { ospfIntfInfoEntry 5}

ospfIfInfoIpAddress OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The IP address of the OSPF interface." 
    ::= { ospfIntfInfoEntry 6}

ospfRouterLSAInfoTable OBJECT-TYPE
    SYNTAX SEQUENCE OF OspfRouterLSAInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "The table of OSPF Router LSA information."
    ::= { ospfinfo 4 }

ospfRouterLSAInfoEntry OBJECT-TYPE
    SYNTAX OspfRouterLSAInfoEntry
    ACCESS not-accessible
    STATUS mandatory
    DESCRIPTION
      "A row in the Router LSA Table indexed by area, routerlink and routerId."
    INDEX { routerLSAAreaIndex, routerLSALinkIndex,
            routerLSAId }
    ::= { ospfRouterLSAInfoTable 1 }
 
OspfRouterLSAInfoEntry ::= SEQUENCE {
    routerLSAAreaIndex               	INTEGER,
    routerLSALinkIndex               	INTEGER,
    routerLSAId               		IpAddress,
    routerLSALinkID   	  		IpAddress,
    routerLSALinkData  			IpAddress,
    routerLSALinkIfIndex  		INTEGER,
    routerLSANoOfTOSMetrics   	        INTEGER,
    routerLSANoOfTOSZeroMetrics 	INTEGER
    }
 
routerLSAAreaIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF AreaID for which the OSPF Router LSA info table is related."
    ::= { ospfRouterLSAInfoEntry 1}

routerLSALinkIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF Link ID for which the OSPF Router LSA info table is related."
    ::= { ospfRouterLSAInfoEntry 2}

routerLSAId OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The OSPF RouterID for which the OSPF Router LSA info table is related."
    ::= { ospfRouterLSAInfoEntry 3}


routerLSALinkID OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"Identifes the object that this router link connects to. Value
	 depends on the link's type."
    ::= { ospfRouterLSAInfoEntry 4}

routerLSALinkData OBJECT-TYPE
    SYNTAX IpAddress
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"This value depends on the link's Type field. For connections
	 to stub networks, Link Data specifies the network's IP address
	 mask. For unnumbered point-to-point connections, it specifies
         the interface's MIB-II ifIndex value and the value of Link Data
         is redundant. For the other link types it specifies the router
         interface's IP address."
    ::= { ospfRouterLSAInfoEntry 5}

routerLSALinkIfIndex OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	 "For unnumbered point-to-point connections, LinkIfIndex specifies
         the interface's MIB-II ifIndex value." 
    ::= { ospfRouterLSAInfoEntry 6}

routerLSANoOfTOSMetrics OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The number of different TOS metrics given for this link, 
         not counting the required link metric(referred to as the TOS 0
         metric)." 
    ::= { ospfRouterLSAInfoEntry 7}

routerLSANoOfTOSZeroMetrics OBJECT-TYPE
    SYNTAX INTEGER
    ACCESS read-only
    STATUS mandatory
    DESCRIPTION
	"The number of Zero TOS metrics given for this link." 
    ::= { ospfRouterLSAInfoEntry 8}

-- Run Time ARP Table

arpInfoTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF AgArpInfoEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of ARP entries."
    ::= { ip-info 2 }

arpInfoEntry OBJECT-TYPE
    SYNTAX  AgArpInfoEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the ARP table"
    INDEX   { arpInfoDestIp }
    ::= { arpInfoTable 1 }

AgArpInfoEntry ::= SEQUENCE {
    arpInfoDestIp         IpAddress,
    arpInfoMacAddr        PhysAddress,
    arpInfoVLAN        	  INTEGER,
    arpInfoSrcPort        INTEGER,
    arpInfoRefPorts       INTEGER,
    arpInfoFlag           INTEGER
    }

arpInfoDestIp OBJECT-TYPE
    SYNTAX  IpAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The destination IP address of the ARP entry."
    ::= { arpInfoEntry 1 }

arpInfoMacAddr OBJECT-TYPE
    SYNTAX  PhysAddress
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The MAC address for the ARP entry."
    ::= { arpInfoEntry 2 }

arpInfoVLAN OBJECT-TYPE 
    SYNTAX  INTEGER 
    ACCESS  read-only 
    STATUS  mandatory 
    DESCRIPTION 
        "The VLAN identifier for the ARP entry." 
    ::= { arpInfoEntry 3 }

arpInfoSrcPort OBJECT-TYPE  
    SYNTAX  INTEGER 
    ACCESS  read-only  
    STATUS  mandatory  
    DESCRIPTION  
        "The  port number on which this entry's equivalence is effective."  
    ::= { arpInfoEntry 4 }

arpInfoRefPorts OBJECT-TYPE   
    SYNTAX  INTEGER  
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The rference ports associated with this ARP entry."   
    ::= { arpInfoEntry 5 }

arpInfoFlag OBJECT-TYPE   
    SYNTAX  INTEGER {
	clear(1),
	unresolved(2),
	permanent(3),
	indirect(4)
	}
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The flag associated with this ARP entry."   
    ::= { arpInfoEntry 6 }

-- VRRP Information

vrrpInfoVirtRtrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpInfoVirtRtrTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The table of VRRP virtual router run-time information."
    ::= { vrrp-info 1 }

vrrpInfoVirtRtrTableEntry OBJECT-TYPE
    SYNTAX  VrrpInfoVirtRtrTableEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "The run-time information about a VRRP virtual router."
    INDEX   { vrrpInfoVirtRtrIndex }
    ::= { vrrpInfoVirtRtrTable 1 }
 
VrrpInfoVirtRtrTableEntry ::= SEQUENCE {
    vrrpInfoVirtRtrIndex      INTEGER,
    vrrpInfoVirtRtrState      INTEGER,
    vrrpInfoVirtRtrOwnership  INTEGER,
    vrrpInfoVirtRtrServer     INTEGER,
    vrrpInfoVirtRtrProxy      INTEGER
    }

vrrpInfoVirtRtrIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The VRRP virtual router index." 
    ::= { vrrpInfoVirtRtrTableEntry 1 }

vrrpInfoVirtRtrState OBJECT-TYPE   
    SYNTAX  INTEGER {
	init(1),
	master(2),
	backup(3)
	}
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The VRRP virtual router state."   
    ::= { vrrpInfoVirtRtrTableEntry 2 }

vrrpInfoVirtRtrOwnership OBJECT-TYPE   
    SYNTAX  INTEGER {
	owner(1),
	renter(2)
	}
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The VRRP virtual router ownership status."   
    ::= { vrrpInfoVirtRtrTableEntry 3 }

vrrpInfoVirtRtrServer OBJECT-TYPE   
    SYNTAX  INTEGER {
	yes(1),
	no(2)
	}
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The VRRP server state identifies virtual routers that support 
         Layer 4 services."   
    ::= { vrrpInfoVirtRtrTableEntry 4 }

vrrpInfoVirtRtrProxy OBJECT-TYPE   
    SYNTAX  INTEGER {
	yes(1),
	no(2)
	}
    ACCESS  read-only   
    STATUS  mandatory   
    DESCRIPTION   
        "The VRRP proxy state identifies virtual proxy routers."
    ::= { vrrpInfoVirtRtrTableEntry 5 }


vrrpOperVirtRtrTable OBJECT-TYPE
    SYNTAX  SEQUENCE OF VrrpOperVirtRtrEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "An entry in the table of virtual routers."
    ::= { vrrpOper 1 }

vrrpOperVirtRtrEntry OBJECT-TYPE
    SYNTAX  VrrpOperVirtRtrEntry
    ACCESS  not-accessible
    STATUS  mandatory
    DESCRIPTION
        "A row in the vrrpOperVirtRtrTable "
    INDEX   { vrrpOperVirtRtrIndex }
    ::= { vrrpOperVirtRtrTable 1 }

VrrpOperVirtRtrEntry ::= SEQUENCE {
    vrrpOperVirtRtrIndex              INTEGER,
    vrrpOperVirtRtrBackup             INTEGER
    }

vrrpOperVirtRtrIndex OBJECT-TYPE
    SYNTAX  INTEGER
    ACCESS  read-only
    STATUS  mandatory
    DESCRIPTION
        "The index for the  VRRP virtual router." 
    ::= { vrrpOperVirtRtrEntry 1 }

vrrpOperVirtRtrBackup OBJECT-TYPE
    SYNTAX  INTEGER {
	ok(1),
	backup(2)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to a value of 'backup(2)' it forces the specified 
         master virtual router into backup mode.
         'ok(1)' is returned when the object os read."
    ::= { vrrpOperVirtRtrEntry 2 }

vrrpOperVirtRtrGroupBackup OBJECT-TYPE
    SYNTAX  INTEGER {
	ok(1),
	backup(2)
	}
    ACCESS  read-write
    STATUS  mandatory
    DESCRIPTION
        "When set to a value of 'backup(2)' it forces the specified 
         master virtual router group into backup mode.
         'ok(1)' is returned when the object os read."
    ::= { vrrpOper 2 }

END