iio: magnetometer: yas530: use signed integer type for clamp limits

[ Upstream commit f1ee548 ]

In the function yas537_measure() there is a clamp_val() with limits of
-BIT(13) and BIT(13) - 1.  The input clamp value h[] is of type s32.  The
BIT() is of type unsigned long integer due to its define in
include/vdso/bits.h.  The lower limit -BIT(13) is recognized as -8192 but
expressed as an unsigned long integer.  The size of an unsigned long
integer differs between 32-bit and 64-bit architectures.  Converting this
to type s32 may lead to undesired behavior.

Additionally, in the calculation lines h[0], h[1] and h[2] the unsigned
long integer divisor BIT(13) causes an unsigned division, shifting the
left-hand side of the equation back and forth, possibly ending up in large
positive values instead of negative values on 32-bit architectures.

To solve those two issues, declare a signed integer with a value of
BIT(13).

There is another omission in the clamp line: clamp_val() returns a value
and it's going nowhere here.  Self-assign it to h[i] to make use of the
clamp macro.

Finally, replace clamp_val() macro by clamp() because after changing the
limits from type unsigned long integer to signed integer it's fine that
way.

Link: https://lkml.kernel.org/r/11609b2243c295d65ab4d47e78c239d61ad6be75.1732914810.git.jahau@rocketmail.com
Fixes: 65f79b5 ("iio: magnetometer: yas530: Add YAS537 variant")
Signed-off-by: Jakob Hauser <[email protected]>

Reported-by: kernel test robot <[email protected]>
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Closes: https://lore.kernel.org/oe-kbuild-all/[email protected]/
Reviewed-by: David Laight <[email protected]>
Acked-by: Jonathan Cameron <[email protected]>
Cc: Lars-Peter Clausen <[email protected]>
Cc: Linus Walleij <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>

Author: Jakko3

drivers/iio/magnetometer/yamaha-yas530.c

@@ -372,6 +372,7 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 	u8 data[8];
 	u16 xy1y2[3];
 	s32 h[3], s[3];
+	int half_range = BIT(13);
 	int i, ret;
 
 	mutex_lock(&yas5xx->lock);
@@ -406,13 +407,13 @@ static int yas537_measure(struct yas5xx *yas5xx, u16 *t, u16 *x, u16 *y1, u16 *y
 	/* The second version of YAS537 needs to include calibration coefficients */
 	if (yas5xx->version == YAS537_VERSION_1) {
 		for (i = 0; i < 3; i++)
-			s[i] = xy1y2[i] - BIT(13);
-		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / BIT(13);
-		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / BIT(13);
-		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / BIT(13);
+			s[i] = xy1y2[i] - half_range;
+		h[0] = (c->k *   (128 * s[0] + c->a2 * s[1] + c->a3 * s[2])) / half_range;
+		h[1] = (c->k * (c->a4 * s[0] + c->a5 * s[1] + c->a6 * s[2])) / half_range;
+		h[2] = (c->k * (c->a7 * s[0] + c->a8 * s[1] + c->a9 * s[2])) / half_range;
 		for (i = 0; i < 3; i++) {
-			clamp_val(h[i], -BIT(13), BIT(13) - 1);
-			xy1y2[i] = h[i] + BIT(13);
+			h[i] = clamp(h[i], -half_range, half_range - 1);
+			xy1y2[i] = h[i] + half_range;
 		}
 	}