I have a PTK470 but not seen in Gnome

[dropbrick]

Hi there,
Have installed the input wacom driver on Rocky8.8 and it installed ok. However I can see the Tablet in Gnome Settings, I can only use it as a mouse.

I see "libwacom" below in the table is TBD, and "The "libwacom" column indicates the minimum version of the libwacom library that must be installed to configure the tablet through the GNOME Control Center." How can I make Gnome see it ? I'd like to test pressure sensitivity in it.

[systema# input-wacom-1.5.0]# modinfo wacom | head
filename: /lib/modules/4.18.0-425.3.1.el8.x86_64/extra/wacom.ko
license: GPL
description: USB Wacom tablet driver
author: Vojtech Pavlik vojtech@ucw.cz
version: v2.00-1.5.0
rhelversion: 8.7
srcversion: 3B925DD382B4538DE4E0B1B
alias: hid:b0005g0101v0000056Ap*
alias: hid:b0001g0101v0000056Ap*

Device ID Model Number Model Name Notes Linux input-wacom libwacom

056a:03f5 PTK470 Intuos Pro Small 3rd-gen (USB interface) 6.12 4.18 TBD

[Pinglinux]

How did you check that your device is only working as a mouse? Please share your output from "libinput list-devices" here. Also, attach "sudo dmesg".

[dropbrick]

[31360.467126] usb 1-5: new full-speed USB device number 6 using xhci_hcd
[31360.859454] usb 1-5: New USB device found, idVendor=056a, idProduct=03f7, bcdDevice= 1.03
[31360.859460] usb 1-5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[31360.859462] usb 1-5: Product: Wacom Intuos Pro M
[31360.859464] usb 1-5: Manufacturer: Wacom Co.,Ltd.
[31360.859465] usb 1-5: SerialNumber: 5EH21A1004466
[31360.900868] input: Wacom Co.,Ltd. Wacom Intuos Pro M System Control as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-5/1-5:1.0/0003:056A:03F7.0007/input/input21
[31360.952200] input: Wacom Co.,Ltd. Wacom Intuos Pro M as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-5/1-5:1.0/0003:056A:03F7.0007/input/input22
[31360.952274] input: Wacom Co.,Ltd. Wacom Intuos Pro M as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-5/1-5:1.0/0003:056A:03F7.0007/input/input23
[31360.952354] hid-generic 0003:056A:03F7.0007: input,hiddev99,hidraw6: USB HID v1.10 Device [Wacom Co.,Ltd. Wacom Intuos Pro M] on usb-0000:01:00.0-5/input0
[31360.962638] hid-generic 0003:056A:03F7.0008: hiddev100,hidraw7: USB HID v1.10 Device [Wacom Co.,Ltd. Wacom Intuos Pro M] on usb-0000:01:00.0-5/input2
[31361.072604] wacom 0003:056A:03F7.0007: hidraw6: USB HID v1.10 Device [Wacom Co.,Ltd. Wacom Intuos Pro M] on usb-0000:01:00.0-5/input0
[31361.072636] input: Wacom Intuos Pro M Pen as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-5/1-5:1.0/0003:056A:03F7.0007/input/input24
[31361.072703] input: Wacom Intuos Pro M Pad as /devices/pci0000:00/0000:00:01.1/0000:01:00.0/usb1/1-5/1-5:1.0/0003:056A:03F7.0007/input/input26

[root@workstation ~]# modinfo wacom | head
filename: /lib/modules/4.18.0-477.27.1.19953.fl8_8.x86_64/extra/wacom.ko
license: GPL
description: USB Wacom tablet driver
author: Vojtech Pavlik vojtech@ucw.cz
version: v2.00-1.5.0
rhelversion: 8.8
srcversion: 3B925DD382B4538DE4E0B1B
alias: hid:b0005g0101v0000056Ap*
alias: hid:b0001g0101v0000056Ap*
alias: hid:b0018g0101v0000056Ap*

[Pinglinux]

Your kernel driver looks right. If you can see the tablet in Gnome "Wacom Tablet" panel, it means your device is in libwacom. Plus, unless you changed something in Gnome "Wacom Tablet" panel, the libwacom can not make your pen into a mouse. Are you using Xorg or Wayland? What do you see from xsetwacom?